![certa plus 泵](/siteassets/catalog/products/corporate/masosine/sinusoidal-pumps/7500/images/fi-masosine-certa-plus.jpg?h=213&w=381&quality=80)
弹性软管组件
Pharmaline N 和 X
![](/siteassets/catalog/products/corporate/aflex/flexible-hose-assemblies/7446/images/pdm-aflex-pharmaline.jpg?quality=80)
![](/siteassets/catalog/products/corporate/aflex/flexible-hose-assemblies/7446/images/pd-aflex-pharmaline.jpg?quality=80)
![](/siteassets/catalog/products/corporate/aflex/flexible-hose-assemblies/7446/images/pd-aflex-pharmaline-01.jpg?quality=80)
![](/siteassets/catalog/products/corporate/aflex/flexible-hose-assemblies/7446/images/pdm-aflex-pharmaline.jpg?w=106&h=106&mode=crop&quality=75)
![](/siteassets/catalog/products/corporate/aflex/flexible-hose-assemblies/7446/images/pd-aflex-pharmaline.jpg?w=106&h=106&mode=crop&quality=75)
![](/siteassets/catalog/products/corporate/aflex/flexible-hose-assemblies/7446/images/pd-aflex-pharmaline-01.jpg?w=106&h=106&mode=crop&quality=75)
概览
Pharmaline N 和 X
PTFE 内衬软管,用于生物技术和制药流体传输
Pharmaline N 和 X 软管设计用于替代制药、化工和食品加工流体传输应用中的硅橡胶传输软管,其孔径平稳,可承受多次高压湿热灭菌。
特点和优势
- 在内部完全需要耐化学性的应用中,替换硅橡胶软管
- 光滑的内壁使流体不间断流动,并易于清洁
- 采用天然或防静电 PTFE 衬套,非常灵活,且防扭结
- 无内衬端接头系列,带激光蚀刻金属抱箍,可实现终极可追溯性
- 提供完全封装的卫生标签系统
- 适合 COP 浸泡、CIP 和 SIP 清洁以及大规模高压湿热灭菌过程的组件
技术摘要
标称孔径 | 6.4 - 80 mm |
标称孔径 | 0.25 - 3 in |
外径 | 11.6 - 92.8 mm |
外径 | 0.456 - 3.654 in |
最大工作压力 | 80 bar |
最大工作压力 | 1160 psi |
认证 | 3.1 可追溯性, 3-A 62-02, ATEX, EN16643:2016, EU 法规 10/2011, FDA(材料), USP VI 级 |
弯曲半径 | 19 - 350 mm |
弯曲半径 | 0.75 - 13.78 in |
编织 | 无 |
盖 | 硅橡胶 |
“技术摘要”表列出了该范围内可用的功能。请参阅“规格”选项卡了解型号特定信息。
性能
Pharmaline N 性能
标称软管孔径 | 实际软管孔径 | 螺旋钢丝 | 盖板外径 | 最小弯曲半径 | *最大工作压力 | 爆破压力 | 单位长度的重量 | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
in | mm | in | mm | in | mm | in | mm | psi | bar | psi | bar | lb/ft | kg/mtr | |
1/4 | 6.4 | 0.260 | 6.6 | - | 0.460 | 11.6 | 3/4 | 19 | 1,160 | 80 | 4,641 | 320 | 0.11 | 0.17 |
3/8 | 9.5 | 0.382 | 9.7 | - | 0.610 | 15.5 | 1 | 25 | 1,015 | 70 | 4,061 | 280 | 0.14 | 0.22 |
1/2 | 12.7 | 0.516 | 13.1 | ✔ | 0.845 | 21.4 | 1 1/2 | 38 | 870 | 60 | 3,480 | 240 | 0.25 | 0.37 |
5/8 | 16.0 | 0.638 | 16.2 | ✔ | 0.990 | 25.2 | 2 | 50 | 725 | 50 | 2,900 | 200 | 0.35 | 0.52 |
3/4 | 19.0 | 0.760 | 19.3 | ✔ | 1.120 | 28.5 | 2 1/2 | 63 | 655 | 45 | 2,610 | 180 | 0.42 | 0.65 |
1 | 25.4 | 1.012 | 25.7 | ✔ | 1.455 | 37.0 | 4 | 100 | 580 | 40 | 2,320 | 160 | 0.57 | 0.88 |
1 1/4 | 32.0 | 1.268 | 32.2 | ✔ | 1.755 | 44.6 | 5 1/4 | 130 | 510 | 35 | 2,030 | 140 | 0.85 | 1.30 |
1 1/2 | 38.0 | 1.516 | 38.5 | ✔ | 2.035 | 51.7 | 6.70 | 170 | 435 | 30 | 1,740 | 120 | 1.14 | 1.70 |
2 | 50.0 | 2.012 | 51.1 | ✔ | 2.580 | 65.6 | 8.27 | 210 | 405 | 28 | 1,624 | 112 | 1.58 | 2.36 |
2 1/2 | 65.0 | 2.508 | 63.7 | ✔ | 3.169 | 80.5 | 11.81 | 300 | 290 | 20 | 1,100 | 80 | 2.41 | 3.59 |
3 | 80.0 | 3.024 | 76.8 | ✔ | 3.654 | 92.8 | 13.78 | 350 | 218 | 15 | 870 | 60 | 2.96 | 4.40 |
* 最大工作压力因温度而异。软管组件的最大工作压力 (MWP) 限于上述两端接头或软管本身的最低 MWP。软管的 MWP 会随着工作温度的升高而降低,详询 Aflex Hose。 |
Pharmaline X 性能
标称软管孔径 | 实际软管孔径 | 螺旋钢丝 | 盖板外径 | 最小弯曲半径 | † 最大工作压力 | 爆破压力 | 单位长度的重量 | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
in | mm | in | mm | in | mm | in | mm | psi | bar | psi | bar | lb/ft | kg/mtr | |
1/4 | 6.4 | 0.260 | 6.6 | - | 0.456 | 11.6 | 11/4 | 30 | 109 | 7.5 | 435 | 30 | 0.06 | 0.09 |
3/8 | 9.5 | 0.382 | 9.7 | - | 0.610 | 15.5 | 11/2 | 38 | 87 | 6.0 | 348 | 24 | 0.09 | 0.14 |
1/2 | 12.7 | 0.516 | 13.1 | ✔ | 0.845 | 21.4 | 23/8 | 60 | 84 | 5.8 | 334 | 23 | 0.21 | 0.32 |
5/8 | 16.0 | 0.638 | 16.2 | ✔ | 0.990 | 25.2 | 21/2 | 64 | 72 | 5.0 | 290 | 20 | 0.19 | 0.29 |
3/4 | 19.0 | 0.760 | 19.3 | ✔ | 1.120 | 28.5 | 3 | 75 | 72 | 5.0 | 290 | 20 | 0.37 | 0.55 |
1 | 25.4 | 1.012 | 25.7 | ✔ | 1.455 | 37.0 | 43/4 | 120 | 60 | 4.0 | 240 | 16 | 0.44 | 0.81 |
11/4 | 32.0 | 1.268 | 32.2 | ✔ | 1.755 | 44.6 | 5 1/2 | 140 | 43 | 3.0 | 175 | 12 | 0.50 | 0.75 |
11/2 | 38.0 | 1.516 | 38.5 | ✔ | 2.035 | 51.7 | 7 | 180 | 29 | 2.0 | 116 | 8 | 0.74 | 1.11 |
2 | 50.0 | 2.012 | 51.1 | ✔ | 2.580 | 65.6 | 12 | 300 | 29 | 2.0 | 116 | 8 | 1.28 | 1.91 |
† 最大工作压力不随温度变化 |
规格
技术规格
Pharmaline N | Pharmaline X | |
---|---|---|
标称孔径 | 6.4 - 80 mm | 6.4 - 50 mm |
标称孔径 | 0.25 - 3 in | 0.25 - 2 in |
实际孔径 | 6.8 - 76.8 mm | 6.8 - 51.6 mm |
实际孔径 | 0.27 - 3.024 in | 0.27 - 2.031 in |
长度 | 15 - 30 m | 30 m |
长度 | 49 - 100 Ft | 100 Ft |
外径 | 11.6 - 92.8 mm | 11.6 - 65.6 mm |
外径 | 0.46 - 3.654 in | 0.456 - 2.58 in |
最大工作压力 | 80 bar | 7.5 bar |
最大工作压力 | 1160 psi | 109 psi |
爆破压力 | 60 - 320 bar | 8 - 30 bar |
爆破压力 | 870 - 4,641 psi | 116 - 435 psi |
认证 | 3.1 可追溯性, 3-A 62-02, ATEX, EN16643:2016, EU 法规 10/2011, FDA(材料), USP VI 级 | 3.1 可追溯性, 3-A 62-02, ATEX, EN16643:2016, EU 法规 10/2011, FDA(材料), USP VI 级 |
工作温度范围 | -73 °C 至 204 °C | -73 °C 至 204 °C |
工作温度范围 | -100 °F 至 400 °F | -100 °F 至 400 °F |
弯曲半径 | 19 - 350 mm | 30 - 300 mm |
弯曲半径 | 0.75 - 13.78 in | 1.25 - 12 in |
编织 | 无 | |
盖 | 硅橡胶 | 硅橡胶 |
端接头 | BSP 60° 锥面内螺纹接头, JIC 接头, NPT 和 BSPT 接头, PTFE 水封管接头, 快装接头, 旋转法兰接头, 槽形立柱接头 | BSP 60° 锥面内螺纹接头, JIC 接头, NPT 和 BSPT 接头, PTFE 水封管接头, 快装接头, 旋转法兰接头, 槽形立柱接头 |
标签选项 | 标准, 流水线标签, 颜色编码 | 标准, 流水线标签, 颜色编码 |
耐真空度 | 耐真空度为 -0.9 bar,最高可达 150 °C (302 °F) | 耐真空度为 -0.9 bar,最高可达 150 °C (302 °F) |
主要材料
螺旋加强筋 | 316 不锈钢 |
衬套管 | 天然 PTFE, 防静电 PTFE |
编织 | 不锈钢 |
钢丝编织 | 不锈钢 |
使用手册
宣传手册
-
Pharmaline N and X technical brochure (EN).pdf
PDF - 1.3mb -
PTFE hoses for Biotech and Pharmaceutical (EN).pdf
PDF - 1.9mb
数据表
-
Pharmaline N datasheet (EN).pdf
PDF - 260kb -
Pharmaline X datasheet (EN).pdf
PDF - 220.5kb
其他资源
-
special-usage-conditions-phan.pdf
PDF - 140.4kb -
configure-for-abrasion.pdf
PDF - 232.1kb -
configure-for-bend.pdf
PDF - 164.2kb -
length-calculation.pdf
PDF - 192.4kb
可选配件和附件
编织、包裹和外部保护
软管 | |||||||||
---|---|---|---|---|---|---|---|---|---|
Bioflex Ultra | Pharmaline N | Pharmaline X | FaBLINE | Corroflon | Corroline+ | Smoothbore | Hyperline FX | Visiflon | |
仅软管 - TO | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
不锈钢 - SS | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
橡胶盖 - RC | ✔ | ✔ | ✔ | ✔ | |||||
聚丙烯编织 - PB | ✔ | ✔ | |||||||
铂金硫化 - SI | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
编织 | |||||||||
Bioflex Ultra | Pharmaline N | Pharmaline X | FaBLINE | Corroflon | Corroline+ | Smoothbore | Hyperline FX | Visiflon | |
塑料橡胶选件 | ✔ | ✔ | ✔ | ||||||
Aramid | ✔ | ||||||||
Kynar 编织 | ✔ | ||||||||
哈氏合金编织 | ✔ | ||||||||
蓝色 EPDM | ✔ | ✔ | ✔ | ||||||
黑色 EPDM | ✔ | ✔ | ✔ | ||||||
外部保护 | |||||||||
Bioflex Ultra | Pharmaline N | Pharmaline X | FaBLINE | Corroflon | Corroline+ | Smoothbore | Hyperline FX | Visiflon | |
保护套 - SG | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
磨损环 - SR | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
保护圈 - PC | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
双橡胶盖端保护 - RC300 | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
双橡胶盖端保护 - DBK300 | ✔ | ✔ | ✔ | ✔ | ✔ |
端接头
Bioflex Ultra | Pharmaline N | Pharmaline X | FaBLINE | Corroflon | Corroline+ | Smoothbore | Hyperline FX | Visiflon | |
---|---|---|---|---|---|---|---|---|---|
转节法兰接头 - 非内衬 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
转节法兰接头 - 内衬 | ✔ | ✔ | ✔ | ✔ | |||||
外螺纹非内衬快装接头 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
外螺纹内衬快装接头 | ✔ | ✔ | ✔ | ✔ | |||||
内螺纹非内衬快装接头 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
内螺纹内衬快装接头 | ✔ | ✔ | ✔ | ✔ | |||||
卫生级 Triclamp 接头 PTFE 内衬和展开 | ✔ | ✔ | ✔ | ||||||
卫生级 Triclamp 接头 - 非内衬 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
卫生级和微型卫生级 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
卫生级 Triclamp 接头 - 90° 弯管接头 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
DIN 11851 / SMS 接头 - PTFE 内衬 | ✔ | ✔ | ✔ | ||||||
DIN 11851 接头 - 非内衬 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
RJT 内螺纹接头 - 非内衬 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
BSP 和 NPT 螺纹接头 - NPT 和 BSPT 接头 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
BSP 和 NPT 螺纹接头 - BSP 60° 锥形阀座内螺纹接头 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
JIC 接头 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
PTFE 水封管接头 | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
3-A 卫生级接头 | ✔ | ✔ | ✔ | ✔ | |||||
90° 弯管接头 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
槽形立柱接头 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
IDF 内螺纹/外螺纹 - 非内衬 | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
ENCAP 接头 | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
PTFE 尾部或液压接头 | ✔ | ✔ | ✔ | ||||||
PTFE 尾部接头 | ✔ | ✔ | ✔ | ✔ |
如何订购
按如下所示的顺序指定所有要求:
- 数量
- 软管尺寸
- PTFE 衬套
- 编织
- 外盖
- 保护系统
- 长度
- 端接头
示例 | |
---|---|
书面说明 | 4 个 1” 孔径 Pharmaline N, AS 软管 x 3.00 米长。两端带 ANSI 150# S/S 法兰 |
特殊要求:
- 软管结构
- 标签信息
- 认证
- 专项检测
在询价或采购订单上指定完整的书面说明:
软管等级
PTFE 衬套 | 编织 | 橡胶盖 |
---|---|---|
天然 (GP) | 316 不锈钢 (SS) | 铂金硫化硅胶 (SI) |
防静电 (AS) |
提供外部保护 – 参见编织、盖和端接头页面。
Pharmaline 组件长度和限制
列出的最小长度不包括接头。
软管长度 + 端接头 = 软管总成总长度(密封面到密封面)
长度按客户要求定制。
公差 +2 %/-0 %。可以按特殊顺序提供更接近的公差。
软管公称直径 | 可见软管最小长度 接头之间 |
† Pharmaline N 最大值 软管总成长度 |
Pharmaline X 最大值 软管总成长度 |
||||||
---|---|---|---|---|---|---|---|---|---|
垂直使用 | 90° 弯曲连接 | ||||||||
in | mm | in | mm | in | mm | ft | 米 | ft | 米 |
1/2 | 15 | 3 | 75 | 3.00 | 75 | 100 | 30 | 65 | 20 |
5/8 | 16 | 3 | 75 | 3.00 | 75 | 100 | 30 | 65 | 20 |
3/4 | 20 | 3 | 75 | 4.00 | 100 | 100 | 30 | 65 | 20 |
1 | 25 | 3 | 75 | 4.33 | 110 | 100 | 30 | 65 | 20 |
11/4 | 32 | 4 | 100 | 6.30 | 160 | 100 | 30 | 20 | 6 |
11/2 | 40 | 4 | 100 | 8.66 | 220 | 100 | 30 | 20 | 6 |
2 | 50 | 4 | 100 | 12.40 | 315 | 100 | 30 | 20 | 6 |
21/2 | 65 | 4 | 100 | 18.70 | 475 | 59 | 18 | 不适用 | 不适用 |
3 | 80 | 4 | 100 | 21.65 | 550 | 49 | 15 | 不适用 | 不适用 |
端接头
提供范围广泛的“标准”端接头。
特殊订单 — 非标准不锈钢等级或哈氏合金或蒙乃尔合金等材料。
等效规格 | |||
---|---|---|---|
等级 | BS 英国标准 |
AISI 美国标准或 C = 铸造等级 |
EN 欧洲标准 |
316L SS | BS 316 S11 | AISI 316 L | EN1.4404 |
316C SS | BS 316 C16 | CF8M | EN 1.4408 |
304 SS | BS 304 S15 | AISI 304 | EN 1.4301 |