![530 process pumps](/siteassets/catalog/products/biotechnology-and-pharmaceutical/watson-marlow-pumps/cased-pumps/242/images/fi-wmpumps-530.jpg?h=213&w=381&quality=80)
530 process pumps
Flow rates to 3.5 L/min and pressures up to 100 psi. Precise 2200:1 speed control range.
Pumps - cased pumps
Call +1 800 282 8823
Maxthane is the perfect choice for peristaltic dosing and metering applications. Fully recyclable thermoplastic polyurethane construction achieves high-performance pumping with reduced environmental impact. The quick-change Loadsure element design ensures easy changeover. The tubing elements are compatible with all types of vegetable oil and CIP chemicals.
Food-grade compliance
Use Maxthane with 505LT and 520RET pumpheads.
Spallation | Very low |
Certification and compliance | (EU) 10/2011, FDA 21CFR177.1680, Regulation (EC) No 1935/2004 |
Shelf life | 5 years |
Technical Summary table lists features available within the range. See ‘Technical specifications’ tab for model specific information.
LoadSure® Elements | Maximum pumping pressure | ||
---|---|---|---|
Bore mm | Bore inch | Bar | psi |
3.2 | 1/8 | 7 | 100 |
6.4 | 1/4 | 4 | 60 |
9.6 | 3/8 | 2 | 30 |
The graphs show the pumping life of Maxthane® LoadSure® elements for all bore sizes.
Maxthane | |
---|---|
Bore size | 3.2 - 9.6 mm |
Bore size | 0.125 - 0.375 in |
Wall thickness | 1.6 mm |
Wall thickness | 0.0625 in |
Colour | Colorless |
Transparency | Transparent |
Spallation | Very low |
Certification and compliance | (EU) 10/2011, FDA 21CFR177.1680, Regulation (EC) No 1935/2004 |
Operating temperature range | 4 to 45 °C |
Operating temperature range | 39 to 113 °F |
Hardness, shore A (5sec) | 87 |
Specific gravity | 1.2 g/cm³ |
UV resistance | Good |
Tear B | 70 kN/m |
Tear B | 619,552 ppi |
Tear B | 4.8 kips/ft |
Ultimate tensile strength | 460 bar |
Ultimate tensile strength | 6672 psi |
Ultimate tensile strength | 46 MPa |
Elongation at break | 600 % |
Tensile stress at 100% elongation | 5 Mpa |
Tensile stress at 100% elongation | 725 Psi |
Shelf life | 5 years |
Compatible pumps | 530 cased pumps |
Test methods—Hardness: ASTM D 2240; Tear B: ISO 34-1B Tear nicked; Specific gravity: ISO 2781; Ultimate tensile strength, Elongation at break, Tensile stress at 100% elongation; ISO 527-2/5A/500; Vicat softening point: ISO 306 (A50); Abrasion resistance: ISO 4649-B. Values reported above are not intended for sales specification and some properties are not routinely measured.
May discolour to a darker shade of yellow with UV exposure.
For occasional use the maximum operating temperature is 65 °C (149 °F).
Do not steam sterilise articles made with thermoplastic polyurethanes—Methylene dianiline can be generated as a result.
Tubing | Thermoplastic polyurethane |
Connector material | PVDF |
LoadSure® Elements | |||
---|---|---|---|
Bore mm | Bore inch | Part number | |
3.2 | 1/8 | 945.0032.PFT | |
6.4 | 1/4 | 945.0064.PFT | |
9.6 | 3/8 | 945.0096.PFT | |
Pumpheads | |||
520RET Element Pumphead | 053.1011.ET0 |
1-LoadSure® Elements require a 520RET pumphead.
Flow rates to 3.5 L/min and pressures up to 100 psi. Precise 2200:1 speed control range.
Pumps - cased pumps
Thermoplastic tubing with long peristaltic life and low permeability. 23 ºF to 176 ºF.
Tubing - peristaltic
Reinforced silicone tubing ideal for biopharmaceutical applications. -4 ºF to 176 ºF to 100 psi.
Tubing - peristaltic
Reinforced fluroelastomer tubing with extreme chemical resistance. -4 ºF to 176 ºF to 60 psi.
Tubing - peristaltic
Thermoplastic elastomer tubing especially resistant to oxidizing agents. 23 ºF to 176 ºF to 100 psi.
Tubing - peristaltic
Platinum-cured silicone tubing with ultra smooth bore and excellent flow stability. -4 ºF to 176 ºF.
Tubing - peristaltic
High performance TPE tubing with exceptional life and accurate flow rates. Weldable and sealable for sterile connectivity.
Tubing - peristaltic
High quality silicone and chemical resistant TPE tubing. Over 50 bore/wall sizes and element lengths available.
Tubing - peristaltic
To order a product or ask a question