![530 process pumps](/siteassets/catalog/products/biotechnology-and-pharmaceutical/watson-marlow-pumps/cased-pumps/242/images/fi-bio-wmpumps-530re-en.jpg?h=213&w=381&quality=80)
530 process pumps
Flow rates to 3.5 L/min (55 USGPH) and pressures up to 7 bar (100 psi). Precise 2,200:1 speed control range.
Pumps - cased pumps
Call +603 55 69 9650
Bioprene® peristaltic pump tubing is USP Class VI and FDA compliant and suitable for biopharmaceutical and food applications.
Bioprene's exceptionally long peristaltic life ensures process security, thereby reducing risk in critical cGMP applications. Bioprene is a thermoplastic elastomer tube which is produced from synthetic components. No natural rubber (such as latex) is used in the production of Bioprene tubing. The raw material has been fully tested to USP Class VI and conforms to NSF51.
Bioprene is widely applicable in biopharmaceutical manufacturing operations such as metering, transfer and filtration, along with a variety of applications within the food and beverage industry.
Operating pressures of 0 to 2 bar can be achieved with Bioprene continuous tubing. A range of LoadSure® tube elements increase the pressure capability up to a maximum of 7 bar.
Spallation | Low |
Certification and compliance | FDA 21CFR177.2600, NSF51 listed, USP Class VI |
Shelf life | 5 years |
Gamma stability | 25 kGy to 40 kGy |
Autoclave stability | 121 °C 30 minutes |
Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.
Bioprene | Bioprene Elements | |
---|---|---|
Bore size | 0.5 - 25.4 mm | 1.6 - 25.4 mm |
Bore size | 0.02 - 1 in | 0.0625 - 1 in |
Wall thickness | 1.6 - 4.8 mm | 2.4 - 4.8 mm |
Wall thickness | 0.0625 - 0.1875 in | 0.09375 - 0.2 in |
Length | 3 - 152 m | |
Colour | Beige | Beige |
Transparency | Opaque | Opaque |
Spallation | Low | Low |
Certification and compliance | FDA 21CFR177.2600, NSF51 listed, USP Class VI | FDA 21CFR177.2600, NSF51 listed, USP Class VI |
Operating temperature range | 5 °C to 80 °C | 5 °C to 80 °C |
Operating temperature range | 41 °F to 176 °F | 41 °F to 176 °F |
Hardness, shore A (5sec) | 62 to 68 | 62 to 68 |
Specific gravity | 0.95 to 0.98 g/ml | 0.95 to 0.98 g/ml |
UV resistance | Excellent | Excellent |
Ultimate tensile strength | >=798 psi | >=798 psi |
Ultimate tensile strength | >=5.3 MPa | >=5.3 MPa |
Elongation at break | 340 to 600 % | 340 to 600 % |
Tensile stress at 100% elongation | 1.9 to 3 Mpa | 1.9 to 3 Mpa |
Tensile stress at 100% elongation | 28 to 43 Psi | 28 to 43 Psi |
Gas permeability rating | Low | Low |
Compression set | 5 to 42.5 % | 5 to 42.5 % |
Water absorption | Low | Low |
Shelf life | 5 years | 5 years |
Gamma stability | 25 kGy to 40 kGy | 25 kGy to 40 kGy |
Autoclave stability | 121 °C 30 minutes | 121 °C 30 minutes |
Sterilisation methods | Autoclave, Gamma | Autoclave, Gamma |
Tubing | Thermoplastic elastomer |
Connector material | PVDF |
Request a Bioprene validation pack.
Bioprene - Thermoplastic tubing validation summary guide
Validation summary guide PDF - 314.9kbWatson-Marlow Bioprene tubing is a high purity product which is produced in a state-of-the-art ISO 14644-1 Class 7 cleanroom facility according to cGMP principles operating an ISO9001:2008 quality system. The final tubing product is compliant with USP Class VI, including USP and USP, and FDA 177:2600 for contact with aqueous food. A DMF (Drug Master File) has also been established with the US FDA.
Bioprene is a thermoplastic elastomer tube which is produced from synthetic components. No natural rubber (such as latex) is used in the production of Bioprene tubing. The raw material has been fully tested to USP Class VI and conforms to NSF51.
Watson-Marlow Bioprene tubing is manufactured from virgin pellet only: no regrind is used in the production of Bioprene. Full traceability is assured through the lot number of the tubing, which enables the raw material, primary manufacturing equipment, quality control records and production records to be identified.
Bioprene tubing is double-packed, in heat-sealed polythene bags in the cleanroom. The bags are labelled with the Bioprene part number, lot number, use-by date and tube description. The standard coil length is 50Â feet (15Â m), other coil lengths or cut lengths are available on request.
Tubing reels, which include up to 500Â feet (152Â m) of tubing, are also available for 1.6, 2.4 and 3.2Â mm wall tubing. The bagged Bioprene coils and reels are packed in a card box outside the cleanroom. The card boxes are labelled with the Bioprene part number, lot number, use-by date and tube description. A lot-specific certificate of conformance is included with each pack of tubing.
Full lot traceability is maintained for every batch of tubing produced through detailed raw material and production records, hard copy and electronic production data and retained samples. Also download a copy of certificate of conformance for Watson-Marlow sanitary tubing and sanitary tubing elements. The raw material is manufactured under strict controls of ingredients, operating procedures and packaging.
All tubing packaging is labelled with the product description, part and lot numbers, use-by date and a barcode of this information. Included in the box is the certificate of conformance. As part of the Watson-Marlow ISO9001:2008 system, lot records and process data are stored for all tubing produced in the plant.
Full lot traceability to raw material supply is therefore assured. All records are kept for the shelf life of the tubing. The plastic packaging used in direct contact with the tubing is also lot traceable and, as with the tubing, all lot records are kept for the shelf life of the tubing.
A sample of every production batch of Bioprene tubing is retained for reference.
If you buy large volumes of Bioprene tubing, Watson-Marlow can supply tubing in the way that best suits your production needs.
*Reel length varies with tube size
Tube ordering codes | ||||||
---|---|---|---|---|---|---|
Bore | Wall | Coil Size | ||||
mm | inch | mm | inch | 15m/50ft | 5m/16ft | 152m/500ft |
0.5 | 1/50 | 1.6 | 1/16 | 933.0005.016 | 933.0005.J16 | 933.0005.R16 |
0.8 | 1/32 | 1.6 | 1/16 | 933.0008.016 | 933.0008.J16 | 933.0008.R16 |
1.6 | 1/16 | 1.6 | 1/16 | 933.0016.016 | 933.0016.J16 | 933.0016.R16 |
2.4 | 3/32 | 1.6 | 1/16 | 933.0024.J16 | 933.0024.R16 | |
3.2 | 1/8 | 1.6 | 1/16 | 933.0032.016 | 933.0032.J16 | 933.0032.R16 |
4.8 | 3/16 | 1.6 | 1/16 | 933.0048.016 | 933.0048.J16 | 933.0048.R16 |
6.4 | 1/4 | 1.6 | 1/16 | 933.0064.016 | 933.0064.J16 | 933.0064.R16 |
8 | 5/16 | 1.6 | 1/16 | 933.0080.016 | 933.0080.J16 | 933.0080.R16 |
1.6 | 1/16 | 2.4 | 3/32 | 933.0016.024 | 933.0016.J24 | 933.0016.R24 |
3.2 | 1/8 | 2.4 | 3/32 | 933.0032.024 | 933.0032.J24 | 933.0032.R24 |
10m/32ft | ||||||
2.4 | 3/32 | 1.6 | 1/16 | 933.0024.016 | ||
122m/400ft | ||||||
4.8 | 3/16 | 2.4 | 3/32 | 933.0048.024 | 933.0048.J24 | 933.0048.R24 |
91m/300ft | ||||||
6.4 | 1/4 | 2.4 | 3/32 | 933.0064.024 | 933.0064.J24 | 933.0064.R24 |
61m/200ft | ||||||
8 | 5/16 | 2.4 | 3/32 | 933.0080.024 | 933.0080.J24 | 933.0080.R24 |
46m/150ft | ||||||
9.6 | 3/8 | 2.4 | 3/32 | 933.0096.024 | 933.0096.J24 | 933.0096.R24 |
3m/10ft | 61m/200ft | |||||
6.4 | 1/4 | 3.2 | 1/8 | 933.0064.032 | 933.0048.I32 | 933.0064.R32 |
46m/150ft | ||||||
9.6 | 3/8 | 3.2 | 1/8 | 933.0096.032 | 933.0096.I32 | 933.0096.R32 |
12.7 | 1/2 | 3.2 | 1/8 | 933.0127.032 | 933.0127.I32 | - |
15.9 | 5/8 | 3.2 | 1/8 | 933.0159.032 | 933.0159.I32 | - |
8 | - | 4 | - | 933.0080.040 | 933.0080.I40 | - |
12 | - | 4 | - | 933.0120.040 | 933.0120.I40 | - |
16 | - | 4 | - | 933.0160.040 | 933.0160.I40 | - |
9.6 | 3/8 | 4.8 | 3/16 | 933.0096.048 | 933.0096.I48 | - |
12.7 | 1/2 | 4.8 | 3/16 | 933.0127.048 | 933.0127.I48 | - |
15.9 | 5/8 | 4.8 | 3/16 | 933.0159.048 | 933.0159.I48 | - |
19 | 3/4 | 4.8 | 3/16 | 933.0190.048 | 933.0190.I48 | - |
25.4 | 1 | 4.8 | 3/16 | 933.0254.048 | 933.0254.I48 | - |
Bioprene Double Segment Kynar Y-Element ordering codes | |||||
---|---|---|---|---|---|
Bore | Wall Thickness | Product codes | |||
mm | inch | mm | inch | ||
1.6 | 1/16 | 2.4 | 3/32 | 933.E016.K24 | |
3.2 | 1/8 | 2.4 | 3/32 | 933.E032.K24 | |
4.8 | 3/16 | 2.4 | 3/32 | 933.E048.K24 | |
6.4 | 1/4 | 2.4 | 3/32 | 933.E064.K24 | |
8.0 | 5/16 | 2.4 | 3/32 | 933.E080.K24 | |
8.0 | 5/16 | 4.0 | 5/32 | 933.E080.K40 | |
9.6 | 3/8 | 2.4 | 3/32 | 933.E096.K24 | |
12.0 | 15/32 | 4.0 | 5/32 | 933.E120.K40 | |
16.0 | 5/8 | 4.0 | 5/32 | 933.E160.K40 | - |
Bioprene Loadsure Elements ordering codes | ||
---|---|---|
Product Name | Product codes | |
Bioprene 520 LoadSure Tl 3.2mm Bore Tri-Clamp Element | 933.0032.PFT | |
Bioprene 520 Loadsure TM 3.2mm TM Bore Tri-Clamp Element 0-4 bar peak pressure | 933.P032.PFT | |
Bioprene 520 Loadsure TH 3.2mm TM Bore Tri-Clamp Element 0-7 bar peak pressure | 933.H032.PFT | |
Bioprene 520 LoadSure Tl 6.4mm Bore Tri-Clamp Element | 933.0064.PFT | |
Bioprene 520 Loadsure TM 6.4mm Bore Tri-Clamp Element 0-4 bar peak pressure | 933.P064.PFT | |
Bioprene 520 LoadSure Tl 9.6mm Bore Tri-Clamp Element | 933.0096.PFT | |
Bioprene 620 LoadSure Tl 12mm Bore Tri-Clamp Element | 933.0120.PFT | |
Bioprene 620 Loadsure TM 12mm Bore Tri-Clamp Element 0-4 bar peak pressure | 933.P120.PFT | |
Bioprene 620 LoadSure Tl 17mm Bore Tri-Clamp Element | 933.0170.PFT | |
Bioprene 620 Loadsure TM 17mm Bore Tri-Clamp Element 0-4 bar peak pressure | 933.P170.PFT | |
Bioprene 720 LoadSure 12.7mm Bore Tri-Clamp Element | 933.0127.PFT | |
Bioprene 720 Loadsure hard 80 Shore 12.7 x 4.8 mm | 933.P127.G48 | |
Bioprene 720 LoadSure 15.9mm Bore Tri-Clamp Element | 933.0159.PFT | |
Bioprene 720 Loadsure hard 80 Shore 15.9 x 4.8 mm | 933.P159.G48 | |
Bioprene 720 LoadSure 19mm Bore Tri-Clamp Element | 933.0190.PFT | |
Bioprene 720 Loadsure hard 80 Shore 19.0 x 4.8 mm | 933.P190.G48 | |
Bioprene 720 LoadSure 25.4mm Bore Tri-Clamp Element | 933.0254.PFT | |
Bioprene 720 Loadsure hard 80 Shore 25.4 x 4.8 mm | 933.P254.G48 | - |
Flow rates to 3.5 L/min (55 USGPH) and pressures up to 7 bar (100 psi). Precise 2,200:1 speed control range.
Pumps - cased pumps
Flow rates to 18 L/min (4.76 USGPM) and pressures up to 4 bar (60 psi). Precise 2,650:1 speed control range.
Pumps - cased pumps
Flow rates to 33 L/min (8.8 USGPM) and pressures up to 2 bar (30 psi). Precise 3,600:1 speed control range.
Pumps - cased pumps
Reinforced silicone tubing ideal for biopharmaceutical applications. -20 ºC to 80 ºC (-4 ºF to 176 ºF) to 7 bar (100 psi).
Tubing - peristaltic
Reinforced fluroelastomer tubing with extreme chemical resistance. -20 ºC to 80 ºC (-4 ºF to 176 ºF) to 4 bar (60 psi).
Tubing - peristaltic
Platinum-cured silicone tubing with ultra smooth bore and excellent flow stability. -20 ºC to 80 ºC (-4 ºF to 176 ºF).
Tubing - peristaltic
High performance TPE tubing with exceptional life and accurate flow rates. Weldable and sealable for sterile connectivity.
Tubing - peristaltic
High quality silicone and chemical resistant TPE tubing. Over 50 bore/wall sizes and element lengths available.
Tubing - peristaltic
To order a product or ask a question