![Tank-bottom valves](/siteassets/catalog/products/corporate/asepco/tank-valves/277/images/fi-asepco-tank-bottom-valve-cut.jpg?h=213&w=381&quality=80)
Tank-bottom valves
The leading aseptic tank-bottom valve. Available in multiple configurations including custom-machined.
Valves - tank valves
Call +603 55 69 9650
Ethylene propylene diene monomer (EPDM) is fairly chemical resistant and offers quality performances in applications with repetitive steam-in-place (SIP) cycles. EPDM a relatively low cost material widely used in pharmaceutical applications
Diaphragm variant(s) | Bellows, Parylene surface, Straight |
Compatible actuators | AJS, AKS |
Compatible valves | Radial, Weirless |
Material specification | EPDM with Parylene surface treatment, Ethylene propylene diene monomer (peroxide cured) |
Standards | ASME BPE, RoHS, USP VI |
Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.
Flow Coefficient (under standard configuration) | ||
---|---|---|
Tank Valve Size | CV | |
0.5" | 4.3 | 1.0" | 15.8 |
1.5" | 48.0 | |
2.0" | 72.0 | |
3.0" | 170.0 | |
4.0" | 302.0 |
EPDM diaphragms | |
---|---|
Tank valve sizes | 0.5", 0.5" Extended, 0.75", 1.0", 1.5", 1.5" Extended, 2.0", 2.0" Extended, 3.0", 3.0" Extended, 4.0" |
Colour | Black |
Diaphragm variant(s) | Bellows, Straight |
Parylene treatment | No |
Operating temperature range | -51 °C to 135 °C |
Operating temperature range | -60 °F to 275 °F |
Max. operating pressure | 4.83 barg |
Max. operating pressure | 70 psig |
Compatible actuators | AJS, AKS |
Compatible valves | Radial, Weirless |
Actuator type | Manual, Pneumatic |
Curing agent | Peroxide |
Steaming required prior to installation | No |
ASME BPE appendix K SIP cycle rating | 300 |
Total actuations during SIP cycle testing | 3000 |
Shelf life | 5 years |
Material specification | Ethylene propylene diene monomer (peroxide cured) |
Standards | ASME BPE, RoHS |
Certification and compliance | ADCF, BSE/TSE free, FDA 21CFR177.2600, USP <87>, USP <88> Class VI |
Diaphragm | RS60065B ethylene propylene diene monomer rubber |
Inserts | 304 SS |
EE17 |
Radial diaphragm extended 1.5" EPDM Black |
EE20 |
Radial diaphragm extended 2" EPDM Black |
EE30 |
Radial diaphragm extended 3" EPDM Black |
EG05 |
Radial diaphragm extended .5" EPDM Black |
EP05 |
Radial diaphragm .5" EPDM Black Straight |
EP10 |
Radial diaphragm 1" EPDM Black Bellows |
EP17 |
Radial diaphragm 1.5" EPDM Black Straight |
EP20 |
Radial diaphragm 2" EPDM Black Bellows |
EP30 |
Radial diaphragm 3" EPDM Black Straight |
EP40 |
Radial diaphragm 4" EPDM Black Straight |
The leading aseptic tank-bottom valve. Available in multiple configurations including custom-machined.
Valves - tank valves
Our best-selling in-line valve featuring a 180 degree install angle with superior drainability in multiple orientations.
Valves - inline valves
Consistent sampling every time. Behind-the-seat-flow path allows for easy clean-in-place/steam-in-place between samples.
Valves - sampling
Designed to allow division and blending of two or three fluid paths in a single assembly. Eliminates dead legs.
Valves - tank valves
Use with freeze tanks or tanks requiring critical temperature control. Extended body and diaphragm.
Valves - tank valves
Created for low-point draining or sampling in piping systems, this valve eliminates dead legs and helps promote drainage.
Valves - tank valves
A valve with a simple clamp connection for easy installation. Allows steam-in-place or flush through, without dead legs.
Valves - tank valves
Used to add ASEPCO valves to existing tanks. Many different designs to fit your specific situation.
Valves - tank valves
An integrated steam valve added to our tank-bottom valve. Allows steam-in-place or flush through, without dead legs.
Valves - tank valves
Off-centre outlet for full drainability when installed on the slope of a vessel head.
Valves - tank valves
Minimise hold-up volume, with two flow paths in one efficient valve.
Valves - inline valves
Designed with through-the-chamber CIP/SIP via 1/4- to 1/2-inch ports, ensuring a truly representative sample every time.
Valves - sampling
Long-lasting, quick-change diaphragms. Extremely chemical and steam resistant. Only available for tank valves.
Valves - diaphragms
Valve diaphragms. Medical grade silicone available in white or clear finish. Parylene surface treated version available.
Valves - diaphragms
Excellent heat and chemical resistance. Not suitable for use with ketones and esters. Steam resistant version available.
Valves - diaphragms
To order a product or ask a question