Valves - connectors

ASEPTIPORT probe mount

Overview

ASEPTIPORT probe mount family

ASEPCO close couple connectors are for connecting flush-mounted probes and instruments to process lines. They are easier to install and clean than the alternatives, and have ASEPCO's patented aseptic seal, which is based on the same reliable seal that you find in our valves.

Features and benefits

  • Clean, aseptic design
  • Save space by attaching multiple 12 mm probes through one connector on your tank
  • Save time and cost by eliminating the need for multiple openings into your vessels
  • So flexible you can use 12 mm probes of varying lengths
  • An incredibly easy sleeve system that mounts using your preference of threaded or clamped connections
  • Future flexibility, install blanks into any port and reserve for future use
  • Can be customized to suit your needs

Technical summary

Mounting typeClamp, Screw in 
Surface finish optionsElectropolished, Max 10 micro-inch Ra (0.25 µm Ra), Max 15 micro-inch Ra (0.375 µm Ra), Max 20 micro-inch Ra (0.5 µm Ra) 
Certification and complianceISO 9001 
StandardsASME BPE, CE-PED 

Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.

Specifications

Technical specifications

ASEPTIPORT probe mount
Mounting typeClamp, Screw in 
Operating temperature range -80 °C to 200 °C
Operating temperature range -112 °F to 392 °F
Operating gauge pressure range -1 barg to 7 barg
Operating gauge pressure range -14.5 psig to 101.5 psig
Surface finish optionsElectropolished, Max 10 micro-inch Ra (0.25 µm Ra), Max 15 micro-inch Ra (0.375 µm Ra), Max 20 micro-inch Ra (0.5 µm Ra) 
Certification and complianceISO 9001 
StandardsASME BPE, CE-PED 

Materials of construction

MaterialHastelloy C22, Hastelloy C276, Stainless steel 316L, Stainless steel AL-6XN

Literature

Datasheet

  1. ASEPTIPORT Probe Mount datasheet (EN).pdf
    PDF - 171.4kb

Order Information

Product codes

Product number Product description
AM-0001-1 Aseptiport probe manifold, 3 probe assemblies, 12mm, 0.5" sample valve, 0.5" outlet and steam port, 316L, 20 micro inch Ra max., EP. Note: Valve requires separate diaphragm and actuator.
AM-0200-0 Aseptiport mount 2" Clamp-end Double 12mm probe mount, threaded, 316L,15 micro-inch Ra surface finish Electropolished and passivated
AM-0200-2 Aseptiport assembly, 2" Clamp end Double Manifold Complete, 2 X 12mm probe, Thread mount 316L
AM-0202 Aseptiport assembly, 2" Clamp end Double Manifold Complete, Thread mount 316L
AM-0300-2 Aseptiport assembly 3 X 25mm dia X 120mm long probe Manifold Complete 3" Clamp mount 316L
AM-0400-2 Aseptiport assembly 2 X 25mm dia X 120 mm long probe Manifold port Complete 4" Clamp mount 316L
PA-0200 Aseptiport insert Sleeve fits 25mm ingold port Fits 120mm probe Thread mount Nitronic 60,15 micro-inch Ra surface finish Electropolished and passivated
PA-0201 Aseptiport insert Plug fits 25mm ingold port Thread mount, Nitronic 60

Recommended Products

  1. Tank-bottom valves

    Tank-bottom valves

    The leading aseptic tank-bottom valve. Available in multiple configurations including custom-machined.

    Valves - tank valves

  2. Inline valves

    Inline valves

    Our best-selling in-line valve featuring a 180 degree install angle with superior drainability in multiple orientations.

    Valves - inline valves

  3. PTFE diaphragms

    PTFE diaphragms

    Long-lasting, quick-change diaphragms. Extremely chemical and steam resistant. Only available for tank valves.

    Valves - diaphragms

  4. Tank valve manual actuators

    Tank valve manual actuators

    Manual version AJS actuator series for heavy-duty applications or AKS actuator series for lighter weight needs.

    Valves - actuators

  5. Divert valves

    Divert valves

    Designed to allow division and blending of two or three fluid paths in a single assembly. Eliminates dead legs.

    Valves - tank valves

  6. Insulate valves

    Insulate valves

    Use with freeze tanks or tanks requiring critical temperature control. Extended body and diaphragm.

    Valves - tank valves

  7. Point-of-use valves

    Point-of-use valves

    Created for low-point draining or sampling in piping systems, this valve eliminates dead legs and helps promote drainage.

    Valves - tank valves

  8. Process valves

    Process valves

    A valve with a simple clamp connection for easy installation. Allows steam-in-place or flush through, without dead legs.

    Valves - tank valves

  9. Sterillite valves

    Sterillite valves

    An integrated steam valve added to our tank-bottom valve. Allows steam-in-place or flush through, without dead legs.

    Valves - tank valves

  10. Tangential valves

    Tangential valves

    Off-centre outlet for full drainability when installed on the slope of a vessel head.

    Valves - tank valves

  11. Block-and-bleed valves

    Block-and-bleed valves

    Eliminate the usual dead leg between seal points, in a reliable block-and-bleed valve.

    Valves - inline valves

  12. Sterile access valves

    Sterile access valves

    Minimise hold-up volume, with two flow paths in one efficient valve.

    Valves - inline valves

Related Products

  1. ASEPCONNECT™

    ASEPCONNECT™

    Close-coupled connector for connecting flush-mounted valves to tanks or inline pipes. Eliminates dead legs and leakage.

    Valves - connectors

  2. ASEPCONNECT™ Inline

    ASEPCONNECT™ Inline

    Close-coupled inline connector for connecting flush-mounted valves to tanks or inline pipes.

    Valves - connectors

Our specialists are here to help you succeed.

To order a product or ask a question

Contact our experts