![FMB210](/siteassets/catalog/products/corporate/flexicon/fully-automatic-filling-systems/7547/images/fi-flexicon-fmb210.jpg?h=213&w=381&quality=80)
FMB210
Fully-automatic systems for production. Highly accurate filling of volumes from less than 0.2 ml to more than 250 ml.
Aseptic filling - fully automatic systems
Call +44 1326 370 370
Fluid path accessories for Flexicon products include: a range of filling nozzles, tubing connectors (Y-connectors in PVDF or PP), weights for tubing, tube manifolds, filling stands and a range of format parts for table-top capping machines (including bottle tools for a wide range of diameters, capping heads for crimp capping and capping tools for screw caps).
Certification and compliance | BSE/TSE free, FDA 21CFR177.1595, FDA 21CFR177.2415, FDA 21CFR177.2510, USP Class IV, USP Class VI |
Gamma stability | Sterilisable by gamma irradiation |
Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.
2 Tube manifold | 4 Tube manifold | Filling nozzle - disposable PEI 100 | Filling nozzle - gas purging | Filling nozzle - hand-held | Filling nozzle - stainless steel AISI316L | Filling nozzle - sterilisable by gamma irradiation or autoclaving | Filling nozzle - with non-drip valve | Filling nozzle - with pneumatic valve | Filling stand | Manifold assembly | Weight for tubing | Y-connectors polyproplyene | Y-connectors PVDF/kynar | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Sizes | 0.6 mm to 6.0 mm ID | 0.6 mm to 6.0 mm ID | 0.8 mm to 6.0 mm ID | 1.3 mm to 5.1 mm ID | 0.6 mm to 8.0 mm ID | 0.6 mm to 8.0 mm ID | 5.0 mm to 12.0 mm ID | H380 mm | 1" to 1.5" bore | 1.6 mm to 8.0 mm ID | 1.2 mm to 10.2 mm ID | 1.2 mm to 4.8 mm ID | ||
Certification and compliance | FDA 21CFR177.1595, USP Class VI | BSE/TSE free, FDA 21CFR177.2415, USP Class VI | BSE/TSE free, FDA 21CFR177.2510, USP Class IV | |||||||||||
Gamma stability | Sterilisable by gamma irradiation |
Tube connector for 2 tubes -Part number | A (OD) (mm) | B (ID) (mm) |
---|---|---|
84-081-106 | 0.6 | 1.0 |
84-081-110 | 1.0 | 1.5 |
84-081-116 | 1.6 | 2.1 |
84-081-132 | 3.2 | 3.8 |
84-081-145 | 4.5 | 5.5 |
84-081-160 | 6.0 | 7.0 |
Tube connector for 4 tubes - Part number | A (OD) (mm) | B (ID) (mm) |
---|---|---|
84-082-106 | 0.6 | 1.0 |
84-082-110 | 1.0 | 1.5 |
84-082-116 | 1.6 | 2.1 |
84-082-132 | 3.2 | 3.8 |
84-082-145 | 4.5 | 5.5 |
84-082-160 | 6.0 | 7.0 |
SPECIFICATIONS | ||||
---|---|---|---|---|
Materials | PEI 1000 (Polyetherimide) | |||
A (ID) | B (OD) | Fill volumes from | Part number | |
Dimensions in mm | Ø0,8 | Ø2,2 | 0.5 ml | 30-033-008 |
Ø1,2 | Ø2,6 | 1.0 ml | 30-033-012 | |
Ø1,6 | Ø3,0 | 1.7 ml | 30-033-016 | |
Ø3,2 | Ø4,6 | 6.5 ml | 30-033-032 | |
Ø4,8 | Ø6,5 | 12.0 ml | 30-033-048 | |
Ø6,0 | Ø8,0 | 22.0 ml | 30-033-060 | |
Set of all sizes | 30-700-053 | |||
Compliance | FDA 21 CFR § 177.1595 USP Class VI | |||
Declaration of compliance - type 2.1 acc.: DS/EN 10204 | Included |
SPECIFICATIONS | |||
---|---|---|---|
Materials | AISI 316L + Viton | ||
C (ID) | D (OD) | Part number | |
Dimensions in mm | Ø4,5 | Ø5,3 | 30-031-050 |
Ø8,5 | Ø10,1 | 30-031-090 | |
O-ring for gas filling nozzle | 54-020-116 | ||
Nozzle holder incl. arm for filling stand | 30-700-053 | ||
Declaration of compliance - Type 2.1 acc.: DS/EN 10204 | Included |
Part number | Description |
---|---|
81-100-200 | Filling stand Ø12 x H380 mm for filling nozzles 30-030-xxx |
81-200-050 | Filling stand Ø20 x H500 mm for filling heads 30-200-xxx |
81-200-000 | Filling stand Ø20 x H750 mm for filling heads 30-200-xxx |
30-700-053 | Nozzle holder arm for filling nozzles 30-030-xxx, 30-033-xxx and 30-040-xxx. Can be mounted on all filling stands. (Included in 81-100-200) |
30-710-052 | Nozzle holder arm for filling heads 30-200-xxx. Can be mounted on all filling stands. (Included in 81-200-050 and 81-200-000) |
SPECIFICATIONS | ||||
---|---|---|---|---|
Materials | AISI 316L | |||
A (ID) | B (OD) | Fill volumes from | Part number | |
Dimensions in mm | Ø1,3 | Ø2,3 | 1.0 ml | 30-015-020 |
Ø3,1 | Ø4,0 | 6.5 ml | 30-015-040 | |
Ø4,1 | Ø5,0 | 12.0 ml | 30-015-050 | |
Ø5,1 | Ø8,5 & 6,0 | 22.0 ml | 30-015-060 | |
Declaration of compliance - Type 2.1 acc.: DS/EN 10204 | Included |
SPECIFICATIONS | ||||
---|---|---|---|---|
Materials | AISI 316L | |||
A (ID) | B (OD) | Fill volumes from | Part number | |
Dimensions in mm | Ø0,6 | Ø1,0 | 0.1 ml | 30-030-006 |
Ø1,0 | Ø1,5 | 0.5 ml | 30-030-010 | |
Ø1,6 | Ø2,1 | 1.7 ml | 30-030-016 | |
Ø3,2 | Ø3,8 | 6.5 ml | 30-030-032 | |
Ø4,5 | Ø5,5 | 12.0 ml | 30-030-045 | |
Ø6,0 | Ø7,0 | 22.0 ml | 30-030-060 | |
Ø8,0 | Ø9,0 | 35.0 ml | 30-030-080 | |
Set of all sizes | 82-100-010 | |||
Nozzle holder incl. arm for filling stand | 30-700-053 | |||
Declaration of compliance - Type 2.1 acc.: DS/EN 10204 | Included |
SPECIFICATIONS | ||||
---|---|---|---|---|
Materials | AISI 316L and PEEK | |||
A (ID) | B (OD) | Fill volumes from | Part number | |
Dimensions in mm | Ø0,6 | Ø1,0 | 0.1 ml | 30-040-006 |
Ø1,0 | Ø1,5 | 0.5 ml | 30-040-010 | |
Ø1,6 | Ø2,1 | 1.7 ml | 30-040-016 | |
Ø3,2 | Ø3,8 | 6.5 ml | 30-040-032 | |
Ø4,5 | Ø5,5 | 12.0 ml | 30-040-045 | |
Ø6,0 | Ø7,0 | 22.0 ml | 30-040-060 | |
Ø8,0 | Ø9,0 | 35.0 ml | 30-040-080 | |
Nozzle holder incl. arm for filling stand | 30-700-053 | |||
Compliance | FDA USP, class VIFDA 21 CFR Part 177.2415, 2008BSE/TSE free | |||
Quality certificate | Included |
SPECIFICATIONS | ||||
---|---|---|---|---|
Materials | AISI 316 | |||
A (ID) | B (OD) | Fill volumes from | Part number | |
Dimensions in mm | Ø8,5 | Ø6,0 | 25.0 ml | 30-200-085 |
Ø12,0 | Ø8,0 | 100.0 ml | 30-200-120 | |
Ø15,0 | Ø10,0 | 150.0 ml | 30-200-150 |
Position | Part number |
---|---|
1.2 - Nitrile rubber valve plate | 30-200-086 |
1.2 A - PTFE (Teflon) valve plate | 30-200-084 |
1.3 - PTFE (Teflon) valve insert | 30-200-082 |
1.4 - Nut | 30-200-010 |
SPECIFICATIONS | |||||
---|---|---|---|---|---|
Materials | AISI 316 | ||||
A | B (OD) | C (ID) | Fill volumes from | Part number | |
Dimensions in mm | 75 | Ø8,0 | Ø5,0 | 25.0 ml | 30-210-050 |
75 | Ø10,0 | Ø7,0 | 50.0 ml | 30-210-070 | |
75 | Ø12,0 | Ø9,0 | 150.0 ml | 30-210-090 | |
35 | Ø15,0 | Ø10,0 | 150.0 ml | 30-210-091 | |
75 | Ø16,0 | Ø12,0 | 300.0 ml | 32-210-120 | |
With net at tip of nozzle prevents dripping when filling oil | 75 | Ø12,0 | Ø8,0 | 100.0 ml | 32-215-080 |
75 | Ø16,0 | Ø11,0 | 300.0 ml | 32-215-110 |
A = NOZZLE BODY | |||
---|---|---|---|
To be used with | Part number | ||
A | Incl. pneumatic control box | PD12, PD22, GD30 | 82-510-000 |
A1 | Excl. pneumatic control box | PF22, DF32, GF30 | 30-100-000 |
B = TUBE CONNECTOR | |||
---|---|---|---|
ID | OD | Part number | |
Dimensions in mm | 7 | 10 | 30-100-105 |
10 | 13 | 30-100-110 |
C = FILLING NOZZLE WITH OUTSIDE VALVE | ||||
---|---|---|---|---|
ID | OD | Length of nozzle | Part number | |
Dimensions in mm | 8 | 10 | 110/60 | 30-100-250 |
12 | 14 | 110/60 | 30-100-260 | |
8 | 10 | 300/250 | 30-100-270 | |
12 | 14 | 300/250 | 30-100-280 |
D = FILLING NOZZLE WITH INSIDE VALVE | ||||
---|---|---|---|---|
Dimensions in mm | ID | OD | Length of nozzle | Part number |
6 | 14 | 110/63 | 30-100-208 | |
7,5 | 14 | 110/53 | 30-100-210 |
SPARE PARTS FOR A / A1 | ||
---|---|---|
Pos. | Description | Part number |
1 | Nozzle body | 30-100-005 |
2 | Arm | 30-700-050 |
3 | House for gasket | 30-100-012 |
4 | Gasket | 54-190-060 |
5 | Head for cylinder | 30-100-010 |
6 | Spring | 30-100-015 |
7 | Spring top | 30-100-020 |
8+9 | Pneumatic cylinder | 30-100-050 |
10 | Gasket | 30-100-053 |
11 | Gasket | 30-100-051 |
Clamp gasket - Part number | Description | ID (mm) |
---|---|---|
84-085-220 | 1” bore, nitrile | 25.4 |
84-085-222 | 1½” bore, nitrile | 38.1 |
84-085-230 | 1” bore, silicone | 25.4 |
84-085-232 | 1½” bore, silicone | 38.1 |
Weight for tubing – Part number | A (ID) (mm) | B (OD) (mm) |
---|---|---|
30-032-016 | 1.6 | 2.1 |
30-032-032 | 3.2 | 3.8 |
30-032-045 | 4.5 | 5.5 |
30-032-060 | 6.0 | 7.0 |
30-032-080 | 8.0 | 9.0 |
Y-connector with certificate - part number | A (OD) (mm) | B (ID) (mm) | For ID tube (mm) |
---|---|---|---|
84-011-002 | 2.4 | 1.2 | 0.5-0.8 |
84-011-004 | 3.6 | 1.8 | 1.2-1.6 |
84-011-006 | 5.9 | 3.0 | 3.0-3.2 |
84-011-008 | 7.2 | 3.6 | 3.2-4.8 |
84-011-010 | 9.5 | 4.8 | 4.8-6.5 |
84-011-012 | 12.4 | 7.5 | 8.0-10.0 |
84-011-014 | 15.9 | 10.2 | 10.0-12.5 |
Part number | A (OD) (mm) | B (ID) (mm) | For ID tube (mm) |
---|---|---|---|
84-012-002 | 2.4 | 1.2 | 0.5-0.8 |
84-012-004 | 3.6 | 1.8 | 1.2-1.6 |
84-012-006 | 5.9 | 3 | 3.0-3.2 |
84-012-008 | 7.2 | 3.6 | 3.2-4.8 |
84-012-010 | 9.5 | 4.8 | 4.8-6.5 |
Material | Kynar®, Nitrile, Nitrile rubber, PEEK, PEI 1000 (Polyetherimide), Polypropylene, PTFE, PVDF, Silicone, Stainless steel AISI 316L |
Fully-automatic systems for production. Highly accurate filling of volumes from less than 0.2 ml to more than 250 ml.
Aseptic filling - fully automatic systems
High quality screw capping for bottles or vials. Reduce risk of repetitive strain injuries. Adjustable torque.
Aseptic filling - capping machines
High quality crimp capping for bottles or vials. Prevent repetitive strain injuries. Fast changeover.
Aseptic filling - capping machines
Precision screw capping machines. Apply torque with an accuracy better than ±10 Ncm. Reduce process validation costs.
Aseptic filling - capping machines
To order a product or ask a question