530 process pumps
Flow rates to 3.5 L/min (55 USGPH) and pressures up to 7 bar (100 psi). Precise 2,200:1 speed control range.
Pumps - cased pumps
Call +27 11 796 2960
Designed for secure, cost effective peristaltic pumping and transfer duties, PureWeld XL tubing provides exceptional life and accurate flow rates compared to other TPE tubing. PureWeld XL provides excellent chemical resistance making it suitable for a range of bioprocessing fluids. PureWeld XL can be welded, allowing complete fluid paths to be assembled in minutes. The tubes’ ultra-smooth bore and wall are ideal for ultrasonic flow measurement, and is engineered to reduce spallation.
Spallation | Very low |
Certification and compliance | EC 1935/2004, FDA 21CFR177.1810, USP <661>, USP <788>, USP <85>, USP Class VI |
Gamma stability | 25 kGy to 50 kGy |
Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.
PureWeld XL weldable TPE tubing | PureWeld XL TPE tubing Elements | |
Bore size | 0.5 - 25.4 mm | 6.4 - 17 mm |
Bore size | 0.02 - 1 in | 0.25 - 0.6692 in |
Wall thickness | 1.6 - 4.8 mm | 2.4 - 4 mm |
Wall thickness | 0.0625 - 0.1875 in | 0.09375 - 0.15625 in |
Length | 15 - 152 m | |
Colour | Colourless | Colourless |
Transparency | Opaque | Opaque |
Spallation | Very low | Very low |
Certification and compliance | EC 1935/2004, FDA 21CFR177.1810, USP <661>, USP <788>, USP <85>, USP Class VI | EC 1935/2004, FDA 21CFR177.1810, USP <661>, USP <788>, USP <85>, USP Class VI |
Operating temperature range | -20 °C to 80 °C | -20 °C to 80 °C |
Operating temperature range | -4 °F to 176 °F | -4 °F to 176 °F |
Hardness, shore A (5sec) | 65-73 | 65-73 |
Specific gravity | 0.89-0.91 g/cm³ | 0.89-0.91 g/cm³ |
UV resistance | Good | Good |
Tear B | >30 kN/m | >30 kN/m |
Tear B | >171 ppi | >171 ppi |
Ultimate tensile strength | 63-180 bar | 63-180 bar |
Ultimate tensile strength | 116 - 261 psi | 116 - 261 psi |
Ultimate tensile strength | 8 - 18 MPa | 8 - 18 MPa |
Elongation at break | >450 % | >450 % |
Tensile stress at 100% elongation | 2.4-3.5 Mpa | 2.4-3.5 Mpa |
Tensile stress at 100% elongation | 348 - 507 Psi | 348 - 507 Psi |
Gas permeability rating | Low | Low |
Compression set | <80 % | <80 % |
Water absorption | Low | Low |
Gamma stability | 25 kGy to 50 kGy | 25 kGy to 50 kGy |
Sterilisation methods | Gamma | Gamma |
Tubing | SEBS |
Connector material | PVDF |
PureWeld XLÂ and its raw materials have been tested under a range of pharmacopoeial and non pharmacopoeial standards. These include:
Additional testing carried out includes extractables testing. For a summary of the validation/qualification testing that has been carried out on PureWeld XL, please see the summary guide.
The full validation guide including additional information regarding test methods and actual test reports.
PureWeld XL, its raw materials and manufacturing process meets a number of regulatory compliance legislations. Specific statements relating to these compliances can be found in the Pumpsil compliance guide which can be requested below.
PureWeld XLadditionally complies with the legal regulations laid down in the Regulation (EC) No. 1935/2004.
PureWeld XLÂ declaration of compliance
Certificate of conformance
PureWeld XL TPE Tubing validation summary guide
Validation summary guide PDF - 367,4kbWatson-Marlow PureWeld XL tubing is a high purity product which is produced in a state-of-the-art ISO14644-1 Class 7 facility. PureWeld XL is a thermoplastic elastomer tube which is produced from synthetic components. PureWeld XL does not include any natural rubber products such as latex and is animal derived content free. There are no known carcinogens used in the tubing or in the production of the tubing. The raw material has been fully tested to USP Class VI and FDA CFR177.1810.
Watson-Marlow PureWeld XL tubing is manufactured from virgin pellet only, no regrind is used in the production. The raw material is manufactured under strict controls of ingredients, operating procedure and packaging. Each lot of raw material undergoes mechanical testing to ensure compliance with the material specification. Full traceability is assured through the lot number of the tubing, this enables the raw material, manufacturing equipment, quality control records and production records to be identified.
PureWeld XL tubing is double-packed in heat-sealed polythene bags in the ISO14644-1 Class 7 clean room. The bags are labelled with the PureWeld XL part number, lot number, use-by date and tube description. The standard coil length is 15Â m/50', other coil lengths or cut lengths are available on request.
Tubing reels, which include up to 500'/152Â m of tubing, are also available for 1.6 mm, 2.4 mm and 3.2Â mm wall tubing.
The bagged PureWeld XL coils and reels are packed in a card box outside the clean room. The card boxes are, like the polythene bags, labelled with the PureWeld XL part number, lot number, use-by date and tube description. A lot-specific certificate of conformance is included with each pack of tubing.
Full lot traceability is maintained for every batch of tubing produced through detailed raw material and production records, hard copy and electronic production data and retain samples.
All tubing packaging is labelled with the product description, part and lot numbers, use-by date and a barcode of this information. Included in the box is the certificate of conformance. As part of the Watson-Marlow ISO9001:2008 system, lot records and process data are stored for all tubing produced in the plant.
Full lot traceability to raw material supply is therefore assured. All records are kept for the shelf life of the tubing. The plastic packaging used in direct contact with the tubing is also lot traceable and, as with the tubing, all lot records are kept for the shelf life of the tubing.
A sample of every production batch of PureWeld XL tubing is retained for reference.
Download a copy of your certificate of conformance for Watson-Marlow tubing and sanitary tubing elements.
PureWeld XL peristaltic pump tubing sizes available | ||||
---|---|---|---|---|
Bore | Wall | Part number | ||
mm | inch | mm | inch | |
0.5 | 1/50 | 1.6 | 1/16 | 942.0005.016 |
1.6 | 1/16 | 1.6 | 1/16 | 942.0016.016 |
1.6 | 1/16 | 2.4 | 3/32 | 942.0016.024 |
3.2 | 1/8 | 1.6 | 1/16 | 942.0032.016 |
4.8 | 3/16 | 1.6 | 1/16 | 942.0048.016 |
4.8 | 3/16 | 2.4 | 3/32 | 942.0048.024 |
6.4 | 1/4 | 1.6 | 1/16 | 942.0064.016 |
6.4 | 1/4 | 2.4 | 3/32 | 942.0064.024 |
8.0 | 5/16 | 1.6 | 1/16 | 942.0080.016 |
8.0 | 5/16 | 2.4 | 3/32 | 942.0080.024 |
9.6 | 3/8 | 2.4 | 3/32 | 942.0096.024 |
9.6 | 3/8 | 3.2 | 1/8 | 942.0096.032 |
9.6 | 3/8 | 4.8 | 3/16 | 942.0096.048 |
12.0 | 15/32 | 4.0 | 5/32 | 942.0120.040 |
12.7 | 1/2 | 3.2 | 1/8 | 942.0127.032 |
12.7 | 1/2 | 4.8 | 3/16 | 942.0127.048 |
15.9 | 5/8 | 3.2 | 1/8 | 942.0159.032 |
15.9 | 5/8 | 4.8 | 3/16 | 942.0159.048 |
19.0 | 3/4 | 4.8 | 3/16 | 942.0190.048 |
25.4 | 1 | 4.8 | 3/16 | 942.0254.048 |
All sizes of PureWeld XL tubing are available in 50ft (15m) coils. Custom sizes are available to order, as are other specific requirements.
PureWeld XL Double Segment Kynar Y-Elements | ||||
---|---|---|---|---|
Bore | Wall Thickness | Product codes | ||
mm | inch | mm | inch | |
6.4 | 0.2500 | 2.4 | 0.0938 | 942.E064.K24 |
8.0 | 0.3125 | 2.4 | 0.0938 | 942.E080.K24 |
9.6 | 0.3750 | 2.4 | 0.0938 | 942.E096.K24 |
12.0 | 0.4724 | 4.0 | 0.1562 | 942.E120.K40 |
PureWeld XL LoadSure Elements ordering codes | |
---|---|
Product Name | Product codes |
PureWeld XL LoadSure 6.4mm Bore Tri-Clamp Element | 942.0064.PFT |
PureWeld XL LoadSure 9.6mm Bore Tri-Clamp Element | 942.0096.PFT |
PureWeld XL LoadSure 12.0mm Bore Tri-Clamp Element | 942.0120.PFT |
PureWeld XL LoadSure 17.0mm Bore Tri-Clamp Element | 942.0170.PFT |
Flow rates to 3.5 L/min (55 USGPH) and pressures up to 7 bar (100 psi). Precise 2,200:1 speed control range.
Pumps - cased pumps
Flow rates to 18 L/min (4.76 USGPM) and pressures up to 4 bar (60 psi). Precise 2,650:1 speed control range.
Pumps - cased pumps
Flow rates to 33 L/min (8.8 USGPM) and pressures up to 2 bar (30 psi). Precise 3,600:1 speed control range.
Pumps - cased pumps
Thermoplastic tubing with long peristaltic life and low permeability. 5 ºC to 80 ºC (23 ºF to 176 ºF).
Tubing - peristaltic
Reinforced silicone tubing ideal for biopharmaceutical applications. -20 ºC to 80 ºC (-4 ºF to 176 ºF) to 7 bar (100 psi).
Tubing - peristaltic
Reinforced fluroelastomer tubing with extreme chemical resistance. -20 ºC to 80 ºC (-4 ºF to 176 ºF) to 4 bar (60 psi).
Tubing - peristaltic
Thermoplastic elastomer tubing especially resistant to oxidizing agents. 5 ºC to 80 ºC (23 ºF to 176 ºF) to 7 bar (100 psi).
Tubing - peristaltic
Platinum-cured silicone tubing with ultra smooth bore and excellent flow stability. -20 ºC to 80 ºC (-4 ºF to 176 ºF).
Tubing - peristaltic
High quality silicone and chemical resistant TPE tubing. Over 50 bore/wall sizes and element lengths available.
Tubing - peristaltic
To order a product or ask a question