Pumps - cased pumps

600 series cased pump

Arrange a demo
Arrange a demo

Overview

630 series process pumps

630 series process pumps offer four drive options, colour display and intuitive menu structures that provide visual status indication and minimal key presses.

Flow rates from 0.001 L/min (0.0002 USGPM) to 18 L/min (4.76 USGPM) depending on model and pumphead/tubing options.

Pumphead options available as standard (others available on request):

  • 620R pumphead for continuous tubing
  • 620RE and 620RE4 pumpheads for tube elements
  • 620L and 620LG twin channel low pulse pumpheads

Features and benefits

  • Colour display and intuitive menu structures provide visual status indication and minimal key presses
  • Flow rates from 0.001 L/min (0.0002 USGPM) to 18 L/min (4.76 USGPM) depending on model and pumphead/tubing options
  • 620R, 620RE, 620RE4, 620L and 620LG pumpheads available
  • 2,650:1 speed control range from 0.1 rpm to 265 rpm in 0.1 rpm increments
  • Keypad incorporates 3-level security PIN lock
  • IP31 (NEMA 2) and IP66 (NEMA 4X) cased pumps available
  • Dual voltage, 115 V/230 V 50/60 Hz
  • Remote Analogue/Digital, RS232, RS485, PROFIBUS®, PROFINET®, SCADA and EtherNet/IP™ control options

Technical summary

Max. flow rate 18 L/min
Min. flow rate0.001 L/min
Max. flow rate301 USGPH
Min. flow rate0.02 USGPH
Drive speed control ratio2650:1 
Operating temperature range 5 °C to 40 °C
Operating temperature range 41 °F to 104 °F
Control typesEtherNet/IP™, Profibus®, Profinet®, Remote Analogue/Digital, RS232, RS485, SCADA 
StandardsCE, cETLus, C-Tick, IRAM, NSF/ANSI 61 (for Marprene tubing and LoadSure elements) 
Drive ingress protectionIP31, IP66, NEMA 2, NEMA 4X 
Drive power supply100 V to 120 V/200 V to 240 V 1ph 50/60 Hz 250 VA 
Compatible tubing bore size 6.4, 8, 9.6, 12, 12.7, 15.9, 16, 17 mm

Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.

Share

Performance

630 Drive with 620R pumphead performance

620R twin-roller pumpheads for continuous 3.2 mm wall thickness tubing - Tube bore and flow rates - L/min (GPH(US))
Tube material Speed 6.4 mm 9.6 mm 12.7 mm 15.9 mm
Marprene® TL, Bioprene® TL 0.1 to 265 rpm 0.001 to 3.2 (0.02 to 50.7) 0.003 to 6.9 (0.05 to 109) 0.004 to 11.1 (0.06 to 176) 0.005 to 13.0 (0.08 to 206)
Pumpsil® 0.1 to 265 rpm 0.001 to 3.2 (0.02 to 50.7) 0.003 to 6.9 (0.05 to 109) 0.004 to 11.0 (0.06 to 174) 0.01 to 15.0 (0.16 to 238)
GORE® STA-PURE® Pump Tubing - Series PFL 0.1 to 265 rpm 0.001 to 3.2 (0.02 to 50.7) 0.003 to 6.6 (0.05 to 105) 0.004 to 11.0 (0.06 to 174) 0.006 to 16.0 (0.1 to 254)
PureWeld XL® 0.1 to 265 rpm NA 0.01 to 6.7 (0.16 to 106) 0.02 to 11.0 (0.32 to 174) 0.03 to 18.0 (0.47 to 285)

630 Drive with 620RE pumphead performance

620RE two-roller low-pulse pumpheads for LoadSure elements — Tube bore and flow rates — L/min (USGPH)
Tube material Speed 12mm 17mm
Marprene® TM, Bioprene® TM 0.1-265rpm 0.004–9.8 (0.06– 155) 0.01–16 (0.16– 254)
Marprene® TL, Bioprene® TL 0.1-265rpm 0.004–11 (0.06– 174) 0.01–18 (0.16– 285)
Pumpsil® 0.1-265rpm 0.004–10 (0.06– 159) 0.01–16 (0.16– 254)
GORE® STA-PURE® Pump Tubing – Series PFL 0.1-265rpm 0.004–11 (0.06– 174) 0.01–19 (0.16– 301)

630 Drive with 620RE4 pumphead performance

620RE4 four-roller low-pulse pumpheads for LoadSure elements — Tube bore and flow rates — L/min (USGPH)
Tube material Speed 12mm 17mm
Marprene® TM, Bioprene® TM 0.1-265rpm 0.003–8.3 (0.05–132) 0.004–11 (0.06–174)
Marprene® TL, Bioprene® TL 0.1-265rpm 0.003–8.3 (0.05–132) 0.005–12 (0.08–190)
Pumpsil® 0.1-265rpm 0.003–8.7 (0.05–138) 0.004–11 (0.06–174)
GORE® STA-PURE® Pump Tubing – Series PFL 0.1-265rpm 0.003–9 (0.05–143) 0.005–13 (0.08–206)

630 Drive with 620L pumphead performance

620L twin-channel low-pulse pumpheads for LoadSure elements — Tube bore and flow rates — L/ min (USGPH)
Tube material Speed Y element tubing Continuous tubing (flow per channel - max of 2 channels)
8.0mm 12.0mm 16.0mm 8.0mm 12.0mm 16.0mm
Pumpsil® 0.1-265rpm 0.002–4.4 (0.03–69.7) 0.003–8.5 (0.05–135) 0.005–11.5 (0.08–182) 0.001–2.2 (0.02–34.9) 0.002–4.3 (0.03–68.2) 0.003–5.8 (0.05–91.9)
Marprene® , Bioprene® 0.1-265rpm 0.002–4.5 (0.03–71.3) 0.003–8.0 (0.05–127) 0.005–11.3 (0.08–179) 0.001–2.3 (0.02–36.5) 0.002–4.0 (0.03–63.4) 0.003–5.7 (0.05–90.3)
GORE® STA-PURE® Pump Tubing Series PFL, GORE® STA-PURE® Pump Tubing Series PCS (620LG pumphead only) 0.1-265rpm 0.002–5.2 (0.03–82.4) 0.003–9.0 (0.05–143) 0.005–12.4 (0.08–197) 0.001–2.6 (0.02–41.2) 0.002–4.5 (0.03–71.3) 0.003–6.7 (0.05–106)

630 Drive with 620LG pumphead performance

620LG twin-channel low-pulse pumpheads for GORE® STA-PURE LoadSure elements — Tube bore and flow rates — L/ min (USGPH)
Tube material Speed Y element tubing Continuous tubing (flow per channel - max of 2 channels)
8.0mm 12.0mm 16.0mm 8.0mm 12.0mm 16.0mm
GORE® STA-PURE® Pump Tubing Series PFL, GORE® STA-PURE® Pump Tubing Series PCS (620LG pumphead only) 0.1-265rpm 0.002–5.2 (0.03–82.4) 0.003–9.0 (0.05–143) 0.005–12.4 (0.08–197) 0.001–2.6 (0.02–41.2) 0.002–4.5 (0.03–71.3) 0.003–6.7 (0.05–106)

Specifications

Technical specifications

630 Drive with 620R pumphead630 Drive with 620RE pumphead630 Drive with 620RE4 pumphead630 Drive with 620L pumphead630 Drive with 620LG pumphead
Pumphead number of rollers2 2 4 
Pumphead number of channels1 1 1 2 2 
Flow rate range0.001 L/min to 18 L/min0.004 L/min to 18 L/min0.003 L/min to 13 L/min0.002 L/min to 13.3 L/min0.002 L/min to 13.3 L/min
Flow rate range0.02 USGPH to 285 USGPH0.06 USGPH to 301 USGPH0.05 USGPH to 206 USGPH0.03 USGPH to 211 USGPH0.03 USGPH to 211 USGPH
Flow rate range0.0002 USGPM to 4.76 USGPM0.0002 USGPM to 4.76 USGPM0.0002 USGPM to 4.76 USGPM0.0002 USGPM to 4.76 USGPM0.0002 USGPM to 4.76 USGPM
Drive speed control ratio2650:1 2650:1 2650:1 2650:1 2650:1 
Drive speed 0.1 - 265 rpm0.1 - 265 rpm0.1 - 265 rpm0.1 - 265 rpm0.1 - 265 rpm
Operating temperature range 5 °C to 40 °C5 °C to 40 °C5 °C to 40 °C5 °C to 40 °C5 °C to 40 °C
Operating temperature range 41 °F to 104 °F41 °F to 104 °F41 °F to 104 °F41 °F to 104 °F41 °F to 104 °F
Weight19.6 - 20.5 kg19.6 - 20.5 kg20.1 - 21 kg24.3 - 25.2 kg24.3 - 25.2 kg
Weight43.2 - 45.2 lbs43.2 - 45.2 lbs44.3 - 46.3 lbs53.6 - 55.6 lbs53.6 - 55.6 lbs
Drive weight 16.5, 17.4 kg16.5, 17.4 kg16.5, 17.4 kg16.5, 17.4 kg16.5, 17.4 kg
Drive weight 36.4, 38.5 lbs36.4, 38.5 lbs36.4, 38.5 lbs36.4, 38.5 lbs36.4, 38.5 lbs
NEMA module weight0.9 kg0.9 kg0.9 kg0.9 kg0.9 kg
NEMA module weight2 lbs2 lbs2 lbs2 lbs2 lbs
Control typesEtherNet/IP™, Profibus®, Profinet®, Remote Analogue/Digital, RS232, RS485, SCADA EtherNet/IP™, Profibus®, Profinet®, Remote Analogue/Digital, RS232, RS485, SCADA EtherNet/IP™, Profibus®, Profinet®, Remote Analogue/Digital, RS232, RS485, SCADA EtherNet/IP™, Profibus®, Profinet®, Remote Analogue/Digital, RS232, RS485, SCADA EtherNet/IP™, Profibus®, Profinet®, Remote Analogue/Digital, RS232, RS485, SCADA 
Drive control optionsBp, BpN, Du, DuN, DuS, En, EnN, Pn, PnN, S, SN, U, UN, US Bp, BpN, Du, DuN, DuS, En, EnN, Pn, PnN, S, SN, U, UN, US Bp, BpN, Du, DuN, DuS, En, EnN, Pn, PnN, S, SN, U, UN, US Bp, BpN, Du, DuN, En, EnN, Pn, PnN Bp, BpN, Du, DuN, En, EnN, Pn, PnN 
StandardsCE, cETLus, C-Tick, IRAM, NSF/ANSI 61 (for Marprene tubing and LoadSure elements) CE, cETLus, C-Tick, IRAM, NSF/ANSI 61 (for Marprene tubing and LoadSure elements) CE, cETLus, C-Tick, IRAM, NSF/ANSI 61 (for Marprene tubing and LoadSure elements) CE, cETLus, C-Tick, IRAM, NSF/ANSI 61 (for Marprene tubing and LoadSure elements) CE, cETLus, C-Tick, IRAM, NSF/ANSI 61 (for Marprene tubing and LoadSure elements) 
Drive ingress protectionIP31, IP66, NEMA 2, NEMA 4X IP31, IP66, NEMA 2, NEMA 4X IP31, IP66, NEMA 2, NEMA 4X IP31, IP66, NEMA 2, NEMA 4X IP31, IP66, NEMA 2, NEMA 4X 
Drive humidity(Non-condensing) 80 % up to 31 °C (88 °F) decreasing linearly to 50 % at 40 °C (104 °F) (Non-condensing) 80 % up to 31 °C (88 °F) decreasing linearly to 50 % at 40 °C (104 °F) (Non-condensing) 80 % up to 31 °C (88 °F) decreasing linearly to 50 % at 40 °C (104 °F) (Non-condensing) 80 % up to 31 °C (88 °F) decreasing linearly to 50 % at 40 °C (104 °F) (Non-condensing) 80 % up to 31 °C (88 °F) decreasing linearly to 50 % at 40 °C (104 °F) 
Drive noise<70dB(A) at 1m <70dB(A) at 1m <70dB(A) at 1m <70dB(A) at 1m <70dB(A) at 1m 
Max. altitude2000 m2000 m2000 m2000 m2000 m
Drive power supply100 V to 120 V/200 V to 240 V 1ph 50/60 Hz 250 VA 100 V to 120 V/200 V to 240 V 1ph 50/60 Hz 250 VA 100 V to 120 V/200 V to 240 V 1ph 50/60 Hz 250 VA 100 V to 120 V/200 V to 240 V 1ph 50/60 Hz 250 VA 100 V to 120 V/200 V to 240 V 1ph 50/60 Hz 250 VA 
Compatible tubing bore size 6.4, 9.6, 12.7, 15.9 mm12, 17 mm12, 17 mm8, 12, 16 mm8, 12, 16 mm

630 Drive with 620R pumphead dimensions

630 Drive with 620RE pumphead dimensions

630 Drive with 620RE4 pumphead dimensions

630 Drive with 620L pumphead dimensions

630 Drive with 620LG pumphead dimensions

Materials of construction

BearingsCarbon steel
DriveshaftStainless steel 440C
Drive caseworkPressure die-cast aluminium LM24, Pressure die-cast aluminium LM6
Drive casework coatingExterior grade polyester powder coat
Guide roller assemblyMoS2 filled Nylon 6 (Nylatron), Stainless steel 303, Stainless steel 316
Drive keypad/HMIPolyester
Pumphead front back platesAluminium alloy HS30
Drive rear blanking plateStainless steel 316
Pumphead body assemblyAlocrom pre-treatment, Aluminium alloy NS4 anodised, Exterior grade polyester powder coat, Polyester epoxy powder, Powder coated aluminium LM24, Pressure die-cast aluminium LM24
Pumphead guardAlocrom pre-treatment, Exterior grade polyester powder coat, Pressure die-cast aluminium LM24
Pumphead roller assemblyFortron 1140L4 (PPS), MoS2 filled Nylon 6 (Nylatron), Stainless steel 303, Stainless steel 316
Pumphead rotor assemblyAluminium alloy HE30, Dupont Hytrel G5544, Fortron 1140L4 (PPS)
Pumphead trackAluminium alloy NS4 anodised, Powder coated aluminium LM24
SpindlesStainless steel 303S31
Switch-plateABS PA-765
Tube clamp assemblyAluminium alloy HE30, Polypropylene

Information listed covers the complete range. For detailed specifications of individual models/components refer to user manual or contact WMFTS representative.

Control

Control options

Key to pump drive models
630S 630SN 630U 630UN 630Du 630DuN 630Bp 630BpN 630US 630DuS 630En 630EnN 630Pn 630PnN
Standard Standard IP66 / NEMA 4X Universal Universal IP66 / NEMA 4X Digital Universal Digital Universal IP66 / NEMA 4X Bus Pump / Profibus Bus Pump / Profibus IP66 / NEMA 4X Universal SCADA / IP66 / NEMA 4X Digital Universal SCADA / IP66 / NEMA 4X EtherNet/IP EtherNet/ IP / IP66 / NEMA 4X PROFINET® PROFINET® / IP66 / NEMA 4X

 

Manual control
Pump drive 630S 630SN 630U 630UN 630Du 630DuN 630Bp 630BpN 630US 630DuS 630En 630EnN 630Pn 630PnN
Intuitive keypad and colour display ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Choice of flowrate or speed display ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Full calibration with choice of flow units ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
MemoDose function ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Auto restart facility ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Guard switch detection ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Leak detection ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Dipensing (Network Control) ✔ ✔ ✔ ✔

 

Remote control
Pump drives 630S 630SN 630U 630UN 630Du 630DuN 630Bp 630BpN 630US 630DuS 630En 630EnN 630Pn 630PnN
Configurable Start/Stop, leak detector and pressure switch input via contact closure or 5 V TTL or 24 V industrial logic*** ✔ ✔ ✔ ✔ ✔ ✔
Configurable Start/Stop, leak detector and pressure switch input via 110 V industrial logic ✔ ✔
Direction change and auto/manual toggle input via contact closure or 5 V TTL or 24 V industrial logic ✔ ✔ ✔ ✔
Direction change and auto/manual toggle input via 110 V industrial logic ✔ ✔
Remote operation of MemoDose (foot/hand‑switch or logic input) ✔ ✔ ✔ ✔
Four configurable digital status outputs through 24 V, 30 W relays ✔ ✔
Four configurable digital status outputs through 110 V relays ✔ ✔
Menu configurable logic outputs ✔ ✔
Remote pressure/flow sensors ✔ ✔ ✔ ✔

 

Analogue speed control
Pump drives 630S 630SN 630U 630UN 630Du 630DuN 630Bp 630BpN 630US 630DuS 630En 630EnN 630Pn 630PnN
Fully configurable inputs; 0-10 V or 4-20 mA ✔ ✔ ✔ ✔ ✔ ✔
Analogue outputs; 0-10 V, 4-20 mA ✔ ✔ ✔ ✔ ✔ ✔
Keypad/analogue input scaling (replacement of diaphragm pumps) ✔ ✔ ✔
Tacho frequency output; 0-1478 Hz ✔ ✔ ✔ ✔
2x sensor inputs 4-20 mA or 0-1000Hz* ✔ ✔ ✔ ✔

 

 

 

Security
Pump drives 630S 630SN 630U 630UN 630Du 630DuN 630Bp 630BpN 630US 630DuS 630En 630EnN 630Pn 630PnN
3-level Security PIN lock ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

 

Network communication
Pump drives 630S 630SN 630U 630UN 630Du 630DuN 630Bp 630BpN 630US 630DuS 630En 630EnN 630Pn 630PnN
RS485 network control ✔ ✔
RS232 network control ✔

 

Digital pump commands (Profibus / EtherNet/IP)
Pump drives 630S 630SN 630U 630UN 630Du 630DuN 630Bp 630BpN 630US 630DuS 630En 630EnN 630Pn 630PnN
PROFIBUS® DP V0 ✔ ✔
PROFINET® (CC-B & Netload Class III) ✔ ✔
EtherNet/IP™ ✔ ✔
Communication speeds from 9.6 kbits/s up to 12000 kbits/s ✔ ✔
Network speed: 10/100 Mbps - Full Duplex Operation ✔ ✔
Network speed: 100 Mbps - Full Duplex Operation ✔ ✔
Auto-detect bus speed ✔ ✔
Speed set point ✔ ✔ ✔ ✔ ✔ ✔
Speed feedback ✔ ✔ ✔ ✔ ✔ ✔
Flow calibration function ✔ ✔ ✔ ✔ ✔ ✔
Hours run ✔ ✔ ✔ ✔ ✔ ✔
Revolution counter ✔ ✔ ✔ ✔ ✔ ✔
Leak detection ✔ ✔ ✔ ✔ ✔ ✔
Low fluid level alarm ✔ ✔ ✔ ✔ ✔ ✔
Diagnostic feedback ✔ ✔ ✔ ✔ ✔ ✔
Flow Totaliser ✔ ✔ ✔ ✔
Sensor scaling ✔ ✔ ✔ ✔
Dispensing (Network Control)** ✔ ✔ ✔ ✔

*Range of 3rd party pressure/flow sensors supported—see compatible sensor list on www.wmftg.com/literature

**Dispensing (Network/Manual) - Store up to 100 recipes locally or via network control. Features include volume, flow rate, anti-drip, ramp and time delays. Run these as batches using local, network or manual keypad control.

***If you can’t see the option you need, contact the engineered products team at WML to discuss

 

Literature

Brochures

  1. Industrial overview (EN).pdf
    PDF - 721,4kb
  2. Food and Beverage overview (EN).pdf
    PDF - 903,8kb
  3. Water and wastewater industry (EN).pdf
    PDF - 582,2kb
  4. Industrial process pumps (EN).pdf
    PDF - 1,6mb
  5. Brewing industry (EN).pdf
    PDF - 210,3kb
  6. Sanitary process pumps (EN).pdf
    PDF - 2,1mb
  7. Industrial EtherNet flyer (EN).pdf
    PDF - 314,2kb

Datasheet

  1. 630 Drive with 620RE pumphead datasheet (EN).pdf
    PDF - 814,8kb
  2. 630 Drive with 620RE4 pumphead datasheet (EN).pdf
    PDF - 814,1kb
  3. 630 Drive with 620L pumphead datasheet (EN).pdf
    PDF - 794,4kb
  4. 630 Drive with 620LG pumphead datasheet (EN).pdf
    PDF - 793,7kb
  5. 630 Drive with 620R pumphead datasheet (EN).pdf
    PDF - 1,2mb

Manuals

  1. 630 Pn-PnN manual (EN).pdf
    PDF - 3,9mb
  2. 630 S-SN manual (EN).pdf
    PDF - 3mb
  3. 630 Bp-BpN manual (EN).pdf
    PDF - 3mb
  4. 630 En-EnN manual (EN).pdf
    PDF - 4mb
  5. 630 U-UN manual (EN).pdf
    PDF - 4,7mb
  6. 630 Du-DuN manual (EN).pdf
    PDF - 4,7mb

Other Resources

  1. 530 630 730 series cased pumps DoC (EN).pdf
    PDF - 137,5kb
  2. Watson-Marlow 530, 630, 730 EtherNet-IP™ and PROFINET® compatible sensor list (EN).pdf
    PDF - 235,2kb
  3. 530 630 730 Pn PnN GSDML compatibility guide.pdf
    PDF - 43,5kb
  4. 530 630 730 En EnN EDS compatibility guide (EN).pdf
    PDF - 44,7kb
  1. 530-630-730-EtherNetIP-pump-rev-2.5.eds
    EDS - 113,9kb
  1. gsdml-v2.4-watson-marlow-530-630-730-profinet-pump-20230316.zip
    ZIP - 5,6kb

Pumpheads

620RE LoadSure tube element pumphead

  • 620RE is a high-performance, accurate, two-roller pumphead with LoadSure rapid tube element change technology
  • 4 mm wall elements in 12 mm or 17 mm bore sizes allow pressures up to 4 bar and flow rates up to 18 L/min
  • Elements are available with Tri-clamp sanitary fittings; and with Cam and Groove fittings

620RE4 LoadSure tube element pumphead

  • 620RE4 is a high-performance, accurate, four-roller pumphead with LoadSure rapid tube element change technology
  • 4 mm wall elements in 12 mm or 17 mm bore sizes allow pressures up to 4 bar and flow rates up to 13 L/min with minimized pulsation
  • Elements are available with industry-standard tri-clamp sanitary fittings; and with Cam and Groove fittings for industry

620R continuous tubing pumphead

  • 620R pumphead accommodates 3.2 mm wall continuous tubing in four bore sizes from 6.4 mm to 15.9 mm, giving up to 16 L/min flow at up to 2 bar pressure
  • Tubing is available in eight materials for almost any chemical requirement

620L low pulsation pumphead

  • 620L is a specialist 2 bar, six-roller pumphead designed for accurate dispensing to ±0.5 %. Minimal pulsation is achieved by splitting the inlet flow into two tubes passing over twin, offset tracks. The two sets of out-of-phase pulses cancel each other out when the channels merge
  • Uses 4.0 mm wall Y-elements in a choice of six materials
  • Two single channels are also available
  • Tubing choices: 8 mm, 12 mm, and 16 mm bore, offering flow rates from 0.002 L/min to 12.4 L/min
  • Dispenses 500 ml in 3.5 seconds

Drives

Simple-to use HMI requiring minimal key presses to reduce chances of costly errors. Flow proportional to pump speed over 2,650:1 control range. IP31 wipedown pumps and IP66 cased pumps for washdown environments.

  • 630S - IP31 and 630SN - IP66 are simple, plug-in and switch on pumps offering economy of ownership. Ultimate process security with a 3 level PIN lock.
  • 630U - IP31 and 630UN - IP66 with all the features of the S/SN models, plus configurable inputs and outputs.
  • 630Du - IP31 and 630DuN - IP66 with configurable inputs and outputs, plus RS232 and RS485.
  • 630Bp - IP31 and 630BpN - IP66 with real time communication makes your process secure and flexible. Bus speed 9.6 kbits/s up to 12,000 kbits/s connectivity
  • 630En - IP31 and 630EnN - IP66 EtherNet/IP connectivity for fast and easy access to pump data over Industrial Ethernet
  • 630Pn - IP31 and 630PnN - IP66 PROFINET connectivity for fast and easy access to pump data over Industrial Ethernet

Order Information

Product codes

A B C D
Model Ingress Protection Pumphead Plug options
3: S
4: U
5: Du
6: Bp
8: En
9: Pn		 1: IP31/ NEMA 2
N: IP66/ NEMA 4X
S: SCADA IP66/ NEMA 4X1,2		 02: 620R3
E2: 620RE3
E4:620RE43
5L: 620L
5G: 620LG		 U: UK mains plug
E: EU mains plug
A: American mains plug
K: Australia mains plug
R: Argentina mains plug
C: Swiss mains plug
D: India/ South Africa mains plug
B: Brazilian mains plug

Notes:

1. U and Du models only

2. Only available with American mains plug

3. Not available for US or DuS models

Recommended Products

  1. Marprene tubing

    Marprene tubing

    Thermoplastic elastomer tubing especially resistant to oxidizing agents. 5 ºC to 80 ºC (23 ºF to 176 ºF) to 7 bar (100 psi).

    Tubing - peristaltic

  2. Pumpsil tubing

    Pumpsil tubing

    Platinum-cured silicone tubing with ultra smooth bore and excellent flow stability. -20 ºC to 80 ºC (-4 ºF to 176 ºF).

    Tubing - peristaltic

  3. GORE STA-PURE PFL tubing

    GORE STA-PURE PFL tubing

    Reinforced fluroelastomer tubing with extreme chemical resistance. -20 ºC to 80 ºC (-4 ºF to 176 ºF) to 4 bar (60 psi).

    Tubing - peristaltic

  4. FLEXMAG 4050 C Flowmeter

    FLEXMAG 4050 C Flowmeter

    KROHNE FLEXMAG 4050 C® flowmeter: Accurately measure your fluid flow rate with the FLEXMAG single-use electromagnetic flowmeter.

    Fluid path - equipment

Related Products

  1. 100 series cased pump

    100 series cased pump

    Flow rates to 190 ml/min (3.04 USGPH) and pressures up to 2 bar (30 psi). Speed control up to 10,000:1.

    Pumps - cased pumps

  2. 300 series cased pump

    300 series cased pump

    Flow rates from 2 μl/min to 2,000 ml/min and pressures up to 2 bar (30 psi). Single or multi channel.

    Pumps - cased pumps

  3. 530 process pumps

    530 process pumps

    Flow rates to 3.5 L/min (55 USGPH) and pressures up to 7 bar (100 psi). Precise 2,200:1 speed control range.

    Pumps - cased pumps

  4. 730 process pumps

    730 process pumps

    Flow rates to 33 L/min (8.8 USGPM) and pressures up to 2 bar (30 psi). Precise 3,600:1 speed control range.

    Pumps - cased pumps

Our process pump specialists are here to help you succeed.

To order a product or ask a question

Contact our experts