Flexible hose assemblies

Smoothbore PTFE hose

Overview

Smoothbore

PTFE-lined hose for automotive and general purpose applications

Smoothbore hose comprises a straight PTFE tube liner and a stainless steel outer braid. It is the basic PTFE hose design being used successfully in many automotive and general-purpose applications. Other applications include use with high-pressure steam and gasses, refrigerants, hot oils, and other hot or corrosive fluids.

Features and benefits

  • PTFE-lined high pressure hose
  • Temperature resistant
  • Chemical resistant
  • Self-cleaning

Technical summary

Nominal bore size0.0625 - 2 in
Outside diameter5 - 56.4 mm
Outside diameter0.197 - 2.221 in
Max. operating pressure540 bar
Max. operating pressure7800 psi
Certification and compliance3.1 Traceability, EN16643:2016, FDA (materials), SAE J1401, SAE J1737, TS 16949:2016 
Bend radius11 - 1,200 mm
Bend radius0.5 - 47.25 in
Braid typeDouble, Single 
CoverEPDM rubber, Flexible PVC, Hytrel, Nylon II, Sarlink, Silicone rubber 

Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.

Performance

Standard wall, single braid (SW, SB)
Bore size (Nominal) Bore size (Actual) Dash size ref (if any) PTFE tube wall thickness Braid outside diameter Minimum bend radius Maximum working pressure Weight per unit length *Part number
mm in mm in mm in mm in bar psi kg/mt lbs/ft
1/8 3.17 0.125 - 0.76 0.030 5.85 0.230 22 7/8 290 4,220 0.065 0.044 70-100-02-01-02
3/16 4.76 0.188 - 0.76 0.025 7.40 0.291 40 15/8 265 3,856 0.080 0.054 70-100-03-01-02
1/4 6.35 0.250 - 0.63 0.025 8.50 0.335 60 23/8 240 3,492 0.093 0.062 70-100-04-01-02
5/16 7.94 0.313 - 0.63 0.025 10.15 0.400 70 27/8 200 2,910 0.110 0.074 70-100-05-01-02
3/8 9.53 0.375 - 0.63 0.025 11.75 0.463 80 32/8 190 2,765 0.124 0.083 70-100-06-01-02
1/2 12.70 0.500 - 0.76 0.030 14.95 0.589 110 43/8 140 2,030 0.207 0.139 70-100-08-01-02
5/8 15.88 0.625 - 0.76 0.030 18.35 0.722 150 6 110 1,601 0.255 0.171 70-100-10-01-02
3/4 19.05 0.750 - 0.76 0.030 21.65 0.852 200 77/8 80 1,164 0.315 0.211 70-100-12-01-02
1 25.40 1.000 - 1.00 0.039 28.15 1.108 300 117/8 55 800 0.430 0.288 70-100-16-01-02
Heavy Wall, single braid (HW, SB)
Bore size (Nominal) Bore size (Actual) Dash size ref (if any) PTFE tube wall thickness Braid outside diameter Minimum bend radius Maximum working pressure Weight per unit length *Part number
mm in mm in mm in mm in bar psi kg/mt lbs/ft
1/8 3.17 0.125 - 1.00 0.039 6.10 0.240 20 7/8 290 4,220 0.068 0.046 70-200-02-01-02
3/16 4.76 0.188 - 1.00 0.039 7.65 0.301 29 11/8 270 3,929 0.087 0.058 70-200-03-01-02
1/4 6.35 0.250 - 1.00 0.039 9.25 0.364 30 12/8 260 3,783 0.113 0.076 70-200-04-01-02
5/16 7.94 0.313 - 1.00 0.039 10.90 0.429 40 15/8 230 3,347 0.135 0.091 70-200-05-01-02
3/8 9.53 0.375 - 1.00 0.039 12.50 0.492 55 22/8 200 2,910 0.153 0.103 70-200-06-01-02
1/2 12.70 0.500 - 1.00 0.039 15.60 0.614 85 33/8 160 2,328 0.240 0.161 70-200-08-01-02
5/8 15.88 0.625 - 1.30 0.051 19.10 0.752 110 43/8 130 1,892 0.292 0.196 70-200-10-01-02
3/4 19.05 0.750 - 1.30 0.051 22.05 0.868 145 56/8 92 1,339 0.344 0.231 70-200-12-01-02
1 25.40 1.000 - 1.50 0.059 28.80 1.134 260 102/8 69 1,004 0.470 0.315 70-200-16-01-02
Medium wall, single braid (MW, SB), also referred to as Hyperline SB
The Hyperline MW, SB Range meets or exceeds SAE 100R14 standard.

Bore size (Nominal)
BB=Big Bore

Bore size (Actual) Dash size ref (if any) PTFE tube wall thickness Braid outside diameter Minimum bend radius Max working pressure Weight per unit length *Part number
mm in mm in mm in mm in Bar Psi Kg/mt Lbs/Ft
1/16 BB 2.0 0.079 -2 1.00 0.040 5.00 0.197 13 1/2 450 6,500 0.045 0.030 70-300-02-01-02
1/8 BB 3.5 0.138 -3 1.00 0.040 6.45 0.254 20 3/4 350 5,076 0.070 0.047 70-300-03-01-02
3/16 BB 5.0 0.200 -4 0.76 0.030 7.65 0.301 45 13/4 290 4,206 0.078 0.052 70-400-03-01-02
1/4 BB 6.7 0.264 -5 0.76 0.030 9.30 0.366 60 23/8 240 3,480 0.110 0.074 70-400-04-01-02
5/16 BB 8.4 0.335 -6 0.76 0.030 10.72 0.422 70 23/4 220 3,190 0.136 0.091 70-400-05-01-02
3/8 BB 10.0 0.394 -7 0.76 0.030 12.75 0.500 80 3 190 2,755 0.166 0.111 70-400-06-01-02
1/2 BB 13.3 0.536 -10 0.76 0.030 16.35 0.644 130 5 150 2,175 0.210 0.141 70-400-08-01-02
5/8 BB 16.5 0.654 -12 0.84 0.033 19.50 0.768 163 61/2 130 1,885 0.280 0.188 70-400-10-01-02
3/4 BB 19.8 0.780 - 1.00 0.040 22.50 0.860 180 7 110 1,595 0.327 0.219 70-400-12-01-02
1 BB 26.4 1.040 - 1.00 0.040 30.10 1.190 230 9 80 1,160 0.524 0.351 70-400-16-01-02
* For Anti-Static Grade, add 10 to the 3-digit part number e.g. 70-100- becomes 70-110 * For Anti-Static Grade, add 10 to the 3-digit part number e.g. 70-100- becomes 70-110

Specifications

Technical specifications

Standard wall, stainless steel single braid hosesMedium wall, stainless steel single braid hosesHeavy wall, stainless steel single braid hosesStandard wall, stainless steel double braid hosesMedium wall, stainless steel double braid hosesHeavy wall, stainless steel double braid hoses
Nominal bore size0.1875 - 1 in0.0625 - 1 in0.125 - 1 in0.125 - 1 in0.0625 - 1 in0.125 - 2 in
Actual bore size4.76 - 25.4 mm2 - 26.4 mm3.17 - 25.4 mm3.17 - 25.4 mm2 - 26.4 mm3.17 - 50.8 mm
Actual bore size0.188 - 1 in0.079 - 1.04 in0.125 - 1 in0.125 - 1 in0.079 - 1.04 in0.125 - 2 in
Outside diameter7.4 - 28.15 mm5 - 30.1 mm6.1 - 28.8 mm6.85 - 29.6 mm6 - 31.7 mm7.05 - 56.4 mm
Outside diameter0.291 - 1.108 in0.197 - 1.19 in0.24 - 1.134 in0.27 - 1.165 in0.236 - 1.249 in0.278 - 2.221 in
Max. operating pressure265 bar450 bar290 bar360 bar540 bar350 bar
Max. operating pressure2910 psi6500 psi4220 psi5238 psi7800 psi5093 psi
Burst pressure165 - 795 bar240 - 1,350 bar207 - 870 bar210 - 1,080 bar300 - 1,620 bar120 - 1,050 bar
Burst pressure2400 - 8,730 psi3480 - 19,500 psi3012 - 12,660 psi3057 - 15,714 psi4200 - 23,400 psi1746 - 15,279 psi
Certification and compliance3.1 Traceability, EN16643:2016, FDA (materials), SAE J1401, SAE J1737, TS 16949:2016 3.1 Traceability, EN16643:2016, FDA (materials), SAE J1401, SAE J1737, TS 16949:2016 3.1 Traceability, EN16643:2016, FDA (materials), SAE J1401, SAE J1737, TS 16949:2016 3.1 Traceability, EN16643:2016, FDA (materials), SAE J1401, SAE J1737, TS 16949:2016 3.1 Traceability, EN16643:2016, FDA (materials), SAE J1401, SAE J1737, TS 16949:2016 3.1 Traceability, EN16643:2016, FDA (materials), SAE J1401, SAE J1737, TS 16949:2016 
Operating temperature range -73 °C to 260 °C-73 °C to 260 °C-73 °C to 260 °C-73 °C to 260 °C-73 °C to 260 °C-73 °C to 260 °C
Operating temperature range -100 °F to 500 °F-100 °F to 500 °F-100 °F to 500 °F-100 °F to 500 °F-100 °F to 500 °F-100 °F to 500 °F
Bend radius40 - 300 mm13 - 230 mm20 - 260 mm20 - 270 mm11 - 210 mm18 - 1,200 mm
Bend radius1.625 - 11.875 in0.5 - 9 in0.875 - 10.25 in0.875 - 10.75 in0.5 - 8.25 in0.75 - 47.25 in
Braid typeSingle Single Single Double Double Double 
CoverEPDM rubber, Flexible PVC, Hytrel, Nylon II, Sarlink, Silicone rubber EPDM rubber, Flexible PVC, Hytrel, Nylon II, Sarlink, Silicone rubber EPDM rubber, Flexible PVC, Hytrel, Nylon II, Sarlink, Silicone rubber EPDM rubber, Flexible PVC, Hytrel, Nylon II, Sarlink, Silicone rubber EPDM rubber, Flexible PVC, Hytrel, Nylon II, Sarlink, Silicone rubber EPDM rubber, Flexible PVC, Hytrel, Nylon II, Sarlink, Silicone rubber 
End fittingHydraulic tail end fittings, PTFE tail end fittings Hydraulic tail end fittings, PTFE tail end fittings Hydraulic tail end fittings, PTFE tail end fittings Hydraulic tail end fittings, PTFE tail end fittings Hydraulic tail end fittings, PTFE tail end fittings Hydraulic tail end fittings, PTFE tail end fittings 
Vacuum resistanceVacuum resistant to -0.9 bar Vacuum resistant to -0.9 bar 

Materials of construction

Liner tubeAnti-static PTFE, HPG PTFE, Natural PTFE
Wire braidAramid fibre, Stainless steel

Literature

Brochures

  1. Smoothbore technical brochure (EN).pdf
    PDF - 1,2mb

Datasheet

  1. Smoothbore Medium Wall, Double Braid Hoses datasheet (EN).pdf
    PDF - 265,7kb
  2. Smoothbore Standard Wall, Double Braid Hoses datasheet (EN).pdf
    PDF - 265,7kb
  3. Smoothbore Standard Wall, Single Braid Hoses datasheet (EN).pdf
    PDF - 265,7kb
  4. Smoothbore Heavy Wall, Single Braid Hoses datasheet (EN).pdf
    PDF - 265,9kb
  5. Smoothbore Medium Wall, Single Braid Hoses datasheet (EN).pdf
    PDF - 265,7kb
  6. Smoothbore Heavy Wall, Double Braid Hoses datasheet (EN).pdf
    PDF - 265,9kb

Other Resources

  1. configure-for-abrasion.pdf
    PDF - 232,1kb
  2. configure-for-bend.pdf
    PDF - 164,2kb
  3. length-calculation.pdf
    PDF - 192,4kb
  4. special-usage-conditions-smth.pdf
    PDF - 136,6kb

Options and accessories

Braids, Covers and External Protections

Hose
  Bioflex Ultra Pharmaline N Pharmaline X FaBLINE Corroflon Corroline+ Smoothbore Hyperline FX Visiflon
Tube only -TO        
Stainless Steel - SS        
Rubber Covered - RC          
Polypropylene Braid - PB              
Platinum Cured - SI        
Braids
  Bioflex Ultra Pharmaline N Pharmaline X FaBLINE Corroflon Corroline+ Smoothbore Hyperline FX Visiflon
Plastic Rubber option            
Aramid                
Kynar Braid                
Hastelloy Braid                
Blue EPDM            
Black EPDM            
External protections
  Bioflex Ultra Pharmaline N Pharmaline X FaBLINE Corroflon Corroline+ Smoothbore Hyperline FX Visiflon
Safeguard Protection Sleeve - SG      
Scuff Ring - SR      
Protection Coil - PC      
Double Rubber Cover End Protection - RC300        
Double Rubber Cover End Protection - DBK300        

 

End Fittings

  Bioflex Ultra Pharmaline N Pharmaline X FaBLINE Corroflon Corroline+ Smoothbore Hyperline FX Visiflon
Swivel Flange Fittings - Non-Lined      
Swivel Flange Fittings - Lined          
Cam & Groove Fittings Male Non-Lined      
Cam & Groove Fittings Male Lined          
Cam & Groove Fittings Female Non-lined      
Cam & Groove Fittings Female Lined          
Sanitary Triclamp Fittings PTFE Lined and Flared            
Sanitary Triclamp Fittings - Non-Lined      
Sanitary & Mini Sanitary      
Sanitary Triclamp Fittings - 90° Elbow Fitting      
DIN 11851 / SMS Fittings - PTFE Lined            
DIN 11851 Fittings - Non-Lined      
RJT Female Fittings - Non-lined      
BSP & NPT Threaded Fittings - NPT & BSPT Fittings
BSP & NPT Threaded Fitting - BSP 60° Cone seat female fittings
JIC Fittings
PTFE Dip Pipe Fittings        
3-A Sanitary Fittings          
90° Elbow Fitting
Grooved Standpipe Fittings
IDF Female / Male - Non-lined        
ENCAP Fittings        
PTFE Tail or Hydraulic Fittings            
PTFE Tail Fittings          

How to order

Specify all requirements in order shown below:

  1. Quantity
  2. Hose size
  3. PTFE Liner
  4. Braid
  5. External Cover
  6. Protection system
  7. Length
  8. End fittings
Example
Written description 1/4” VH1, HPG, AS, RC (Blue)
Part numbers Part No 70-310-03-01-02, PVC Trans Blue.

 

Special requirements:

  • Hose construction
  • Tagging information
  • Certification
  • Special testing

Specify full written description on enquiry or purchase order:

Hose Grades

PTFE liner Braids Rubber covers
Natural (GP) 316 stainless steel (SS) Plastic Rubber covers
Antistatic (AS)    

 

Smoothbore Cut Lengths

Aflex Hose are also able to supply Smoothbore Hose in ready-to-assemble pre-cut lengths, with the braid wire at the ends annealed and cut so the cut ends do not flare out. This makes it easier to slide ferrules on to the hose ends during assembly.

This can be applied to all sizes up to 1” bore Smoothbore, Single Braid hose for minimum quantities of 500+ lengths. Minimum cut length 60mm (23/8”), lengths cut to an accuracy of 1.5mm (1/16”).

External protections available – see braid, covers and end fittings page.

Smoothbore assembly length and limitations

MINIMUM LENGTHS DO NOT INCLUDE FITTINGS.

Hose length + end fittings = Total hose assembly length (sealing face to sealing face)

Lengths made to customer requirement.

Tolerance +11/2%/-0 %. Closer tolerances available to special order.

End Fittings

Large range of ‘standard’ end fittings available.

Special order—non-standard grades of SS or materials such as Hastelloy or Monel.

Specification Equivalents
Grade BS
British Standard
AISI
American Standard or
C = Casting Grade
EN
European Norm
316L SS BS 316 S11 AISI 316 L EN1.4404
316C SS BS 316 C16 CF8M EN 1.4408
304 SS BS 304 S15 AISI 304 EN 1.4301

Related Products

  1. Bioflex Ultra

    Bioflex Ultra

    Smooth bore hose for biopharm and fine chemicals for clean, fast flow of high purity fluids.

    Flexible hose assemblies

  2. Corroflon hose

    Corroflon hose

    Convoluted bore hose for transferring process fluids where a smooth bore is not a specific requirement.

    Flexible hose assemblies

  3. Corroline+ hose

    Corroline+ hose

    Smooth bore hose for chemical and other fluid flow applications where rough usage may occur.

    Flexible hose assemblies

  4. Visiflon hose

    Visiflon hose

    Convoluted bore hose for all applications where a smooth bore and/or high pressures are not required.

    Flexible hose assemblies

Our specialists are here to help you succeed.

To order a product or ask a question

Contact our experts