Valves - diaphragms

EPDM diaphragms

Order a sample
Order a sample

Overview

EPDM diaphragms

Ethylene propylene diene monomer (EPDM) is fairly chemical resistant and offers quality performances in applications with repetitive steam-in-place (SIP) cycles. EPDM a relatively low cost material widely used in pharmaceutical applications

Features and benefits

  • All EPDM diaphragms are laser-etched with cure dates and batch numbers, ensuring that they are completely traceable
  • Wide temperature range; good in steam applications
  • Not suitable for use with solvents or petroleum agents

Technical summary

Diaphragm variant(s)Bellows, Parylene surface, Straight 
Compatible actuatorsAJS, AKS 
Compatible valvesRadial, Weirless 
Material specificationEPDM with Parylene surface treatment, Ethylene propylene diene monomer (peroxide cured) 
StandardsASME BPE, RoHS, USP VI 

Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.

Share

Performance

Performance

Flow Coefficient (under standard configuration)
Tank Valve Size CV
0.5" 4.3
1.0" 15.8
1.5" 48.0
2.0" 72.0
3.0" 170.0
4.0" 302.0

Specifications

Technical specifications

EPDM diaphragms
Tank valve sizes0.5", 0.5" Extended, 0.75", 1.0", 1.5", 1.5" Extended, 2.0", 2.0" Extended, 3.0", 3.0" Extended, 4.0" 
ColourBlack 
Diaphragm variant(s)Bellows, Straight 
Parylene treatmentNo 
Operating temperature range -51 °C to 135 °C
Operating temperature range -60 °F to 275 °F
Max. operating pressure4.83 barg
Max. operating pressure70 psig
Compatible actuatorsAJS, AKS 
Compatible valvesRadial, Weirless 
Actuator typeManual, Pneumatic 
Curing agentPeroxide 
Steaming required prior to installationNo 
ASME BPE appendix K SIP cycle rating300 
Total actuations during SIP cycle testing3000 
Shelf life5 years
Material specificationEthylene propylene diene monomer (peroxide cured) 
StandardsASME BPE, RoHS 
Certification and complianceADCF, BSE/TSE free, FDA 21CFR177.2600, USP <87>, USP <88> Class VI 
Max. operating pressure varies by size up to maximum indicated

Materials of construction

DiaphragmRS60065B ethylene propylene diene monomer rubber
Inserts304 SS

Literature

Brochures

  1. ASEPCO weirless radial diaphragm valves (EN).pdf
    PDF - 600,3kb

Datasheet

  1. EPDM Diaphragms datasheet (EN).pdf
    PDF - 145,9kb

Order Information

Product codes

EPDM diaphragms product codes

Code Product

EE17

Radial diaphragm extended 1.5" EPDM Black

EE20

Radial diaphragm extended 2" EPDM Black

EE30

Radial diaphragm extended 3" EPDM Black

EG05

Radial diaphragm extended .5" EPDM Black

EP05

Radial diaphragm .5" EPDM Black Straight

EP10

Radial diaphragm 1" EPDM Black Bellows

EP17

Radial diaphragm 1.5" EPDM Black Straight

EP20

Radial diaphragm 2" EPDM Black Bellows

EP30

Radial diaphragm 3" EPDM Black Straight

EP40

Radial diaphragm 4" EPDM Black Straight

Recommended Products

  1. Insulate valves

    Insulate valves

    Use with freeze tanks or tanks requiring critical temperature control. Extended body and diaphragm.

    Valves - tank valves

  2. Sterillite valves

    Sterillite valves

    An integrated steam valve added to our tank-bottom valve. Allows steam-in-place or flush through, without dead legs.

    Valves - tank valves

  3. Divert valves

    Divert valves

    Designed to allow division and blending of two or three fluid paths in a single assembly. Eliminates dead legs.

    Valves - tank valves

  4. Point-of-use valves

    Point-of-use valves

    Created for low-point draining or sampling in piping systems, this valve eliminates dead legs and helps promote drainage.

    Valves - tank valves

  5. Process valves

    Process valves

    A valve with a simple clamp connection for easy installation. Allows steam-in-place or flush through, without dead legs.

    Valves - tank valves

  6. Retrofit valves

    Retrofit valves

    Used to add ASEPCO valves to existing tanks. Many different designs to fit your specific situation.

    Valves - tank valves

  7. Tangential valves

    Tangential valves

    Off-centre outlet for full drainability when installed on the slope of a vessel head.

    Valves - tank valves

  8. Tank-bottom valves

    Tank-bottom valves

    The leading aseptic tank-bottom valve. Available in multiple configurations including custom-machined.

    Valves - tank valves

  9. Zero dead leg valves

    Zero dead leg valves

    For use in situations where sampling, draining, transferring or directing fluid from a line is necessary.

    Valves - tank valves

  10. Block-and-bleed valves

    Block-and-bleed valves

    Eliminate the usual dead leg between seal points, in a reliable block-and-bleed valve.

    Valves - inline valves

  11. Inline valves

    Inline valves

    Our best-selling in-line valve featuring a 180 degree install angle with superior drainability in multiple orientations.

    Valves - inline valves

  12. Sterile access valves

    Sterile access valves

    Minimise hold-up volume, with two flow paths in one efficient valve.

    Valves - inline valves

  13. I-Sample valves

    I-Sample valves

    Designed with through-the-chamber CIP/SIP via 1/4- to 1/2-inch ports, ensuring a truly representative sample every time.

    Valves - sampling

  14. Sample valves

    Sample valves

    Consistent sampling every time. Behind-the-seat-flow path allows for easy clean-in-place/steam-in-place between samples.

    Valves - sampling

Related Products

  1. PTFE diaphragms

    PTFE diaphragms

    Long-lasting, quick-change diaphragms. Extremely chemical and steam resistant. Only available for tank valves.

    Valves - diaphragms

  3. Viton diaphragms

    Viton diaphragms

    Excellent heat and chemical resistance. Not suitable for use with ketones and esters. Steam resistant version available.

    Valves - diaphragms

Our specialists are here to help you succeed.

To order a product or ask a question

Contact our experts