Pumps - hose pumps

Bredel CIP 20, 25 & 32

Arrange a demo

Bredel CIP pump

The Bredel CIP pump is built for food and beverage processes that require optimal efficiency and regular Clean-In-Place (CIP).

The innovative design and automatic retractable shoes are specifically designed for CIP processes ensuring contamination-free pumping, while simplifying maintenance with minimal components.

Features and benefits

Enhanced hygiene: Meets all Clean-In-Place (CIP) requirements, ensuring system cleanliness
Automated shoe retraction: Reverse the pump to retract shoes without manual work. Run the pump forward to effortlessly reengage shoes
Reduced power usage: During cleaning, the CIP rotor allows the shoes to be retracted and the pump turned off
Extended hose life: Reduce hose compressions, in particular, under high temperature/chemical cleaning process
Retrofittable: Minimises investment costs by allowing easy rotor replacement

Technical summary

Max. flow rate continuous	3200 L/h
Max. flow rate continuous	844 USGPH
Volume per revolution	0.152 - 0.625 L
Max. continuous operating speed	65 - 100 rpm
Max. operating pressure	16 bar
Max. operating pressure	232 psi
Min. starting torque	85 - 210 N m
Min. starting torque	752 - 1,859 in.lbs
Weight	42 - 130 kg

Technical Summary table lists features available within the range. See ‘Technical specifications’ tab for model specific information.

CIP 20 performance

Technical specifications

	CIP 20
Max. flow rate continuous	600 L/h
Max. flow rate continuous	158 USGPH
Max. flow rate intermittent	820 L/h
Max. flow rate intermittent	216 USGPH
Volume per revolution	0.152 L
Volume per revolution	0.0402 USG
Max. continuous operating speed	65 rpm
Max. intermittent operating speed	90 rpm
Max. operating pressure	10 bar
Max. operating pressure	145 psi
Max. inlet pressure	2 bar abs
Max. inlet pressure	30 psi abs
Max. suction capability	9.5 mWC
Max. suction capability	374 inWC
Suction capability (80% Flow rate)	9.5 mWC
Suction capability (80% Flow rate)	374 inWC
Operating temperature range	-20 to 45 °C
Operating temperature range	-4 to 113 °F
Fluid temperature range	-20 to 80 °C
Fluid temperature range	-4 to 176 °F
Min. starting torque	85 N m
Min. starting torque	752 in.lbs
Weight	42 kg
Weight	93 lbs
Pumphead weight	25.2 kg
Pumphead weight	56 lbs
Rotor weight	5.8 kg
Rotor weight	13 lbs
Hose lubricant required	0.5 L
Hose lubricant required	0.1 USG
Port configurations	Down, Left, Right, Up
Pumping direction	Clockwise, Counterclockwise
Compatible hose materials	Bioprene, CSM, EPDM, F-NBR, NBR, NR-Metering, NR-Transfer
Flange assembly type	ANSI, DIN, JIS
Sanitary connector options	DIN 11851, DIN 11864, IDF, RJT, SMS, Tri-clamp

Please consult your Bredel representative for lower or higher temperature operation. Allowable ambient temperature is based on pump capabilities and may be further limited by gearbox ambient capabilities.

CIP 20 dimensions

Type	A	A1	B	C	D	ØE	F	G	H	H1	H2max	J	K	Lmax	L1	L2max	M	N	O	ØP
Bredel 20 (mm)	427	431	230	63	195	20/25.5*	285	315	304	167	294	82	61	505	46	378	150	75	25	12
Bredel 20 (inches)	16.8	17.0	9.1	2.5	7.7	20mm/25.5mm*	11.2	12.4	12.0	6.6	11.6	3.2	2.4	19.9	1.8	14.9	5.9	3.0	1.0	12mm

Connector sizes	MNPT	EN DIN	JIS
Bredel 20	0.75"	20mm	20mm

Materials of construction

Hose material	Bioprene (tube), CSM, EPDM, F-NBR, NBR, NBR for food, NR Endurance, NR-Transfer
Housing	Cast iron, ISO12944 category C4M
Rotor assembly	Cast iron, ISO12944 category C4M
Cover assembly	Cast iron, ISO12944 category C4M
Brackets and fasteners	Stainless steel 316
Support frame	Galvanized steel, Stainless steel 316
Hose clamps	Stainless steel 316
Coupling bush	Alloy steel
Seals	EPDM, NBR
Shoe material	Aluminum, Steel