Pumps - cased pumps

100 series cased pump

Arrange a demo

Overview

100 series laboratory pumps

100 series pumps are small and stackable, saving valuable space in cleanroom, LAF and biosafety cabinet installations, capable of flow rates up to 3.04 GPH.

The 100 series is the perfect pump for maximizing yield in fermentation and cell culture applications. Ultra-compact and stackable for multiple feeds such as pH control, antifoam, nutrient and buffer addition, the 120 offers the ideal combination of size and technology to optimize your process. The 100 series pump is perfectly suited to single-use systems. Error-free tube change takes only seconds.

Biopharmaceutical processes require accurate and repeatable pumping that is easy to validate. With an exceptional 2,000:1 speed range, the 100 series pump delivers the flexibility and purity so vital to drug trials. A keypad lock secures your pumping parameters for consistent and repeatable performance.

Pumphead options available as standard (others available on request):

120R single channel, two roller pumphead for continuous tubing
114DV flip-top single-channel pumphead for continuous tubing
400D1 single-channel pumphead for continuous tubing
400DM2 twin-channel pumphead for manifold tubing
400DM3 three-channel pumphead for manifold tubing

Features and benefits

Smooth, wipe down case with no sharp edges to tear gloves and no bug traps. IP31 ingress protection
Superior speed control up to 2,000:1, ±1 % set speed accuracy, repeatable flow
Efficient and intuitive to use, requiring minimal key presses
Compact footprint requires minimal countertop space
Maintenance-free, brushless DC motor
Single, twin or three channels of flow
Manual, remote or auto control
Three-year warranty

Technical summary

Max. flow rate	190 ml/min
Min. flow rate	0.0001 ml/min
Max. flow rate	3.04 USGPH
Min. flow rate	0.00002 USGPH
Max. operating pressure	2 bar
Max. operating pressure	30 psi
Speed control ratio	100:1, 1000:1, 200:1, 2000:1, 32:1, 320:1
Operating temperature range	5 to 40 °C
Operating temperature range	40 to 104 °F
Standards	CE, cETLus
Drive ingress protection	IP31, NEMA 2
Drive power supply	Supplied with 24 VDC mains transformer plug (range 90 to 264 VAC 47 to 63 Hz) which comes with multi-country adaptors

Technical Summary table lists features available within the range. See ‘Technical specifications’ tab for model specific information.

Performance

Drive with 102R Pumphead performance

102R pumphead for continuous tubing for fixed (120F) speed pumps — Tube bore and flow rates (ml/min)
	Speed rpm	0.5mm	0.8mm	1.6mm	3.2mm	4.8mm
Pumpsil (Silicone)	10rpm	0.3	0.5	2.1	8.5	17
	17rpm	0.5	0.9	3.6	14	29
	31rpm	0.9	1.6	6.5	26	52

102R pumphead for continuous tubing for manual (120S) and auto (120U) variable speed pumps — Tube bore and flow rates (ml/min)
	Speed rpm	0.5mm	0.8mm	1.6mm	3.2mm	4.8mm
Pumpsil (Silicone)	1 – 32rpm	0.03-0.9	0.05-1.6	0.21-6.7	0.85-27	1.6-54
Pumpsil (Silicone)	0.1 – 32rpm	0.003-0.9	0.005-1.6	0.021-6.7	0.085-27	0.16-54

Drive with 114DV Pumphead performance

114DV pumphead for continuous tubing for fixed (120F) speed pumps — Tube bore and flow rates (ml/min)
Speed rpm	0.5mm	0.8mm	1.6mm	2.4mm	3.2mm	4.0mm	4.8mm
10rpm	0.2	0.4	1.4	2.9	4.7	6.7	8.5
17rpm	0.3	0.7	2.4	4.9	8.0	11	14
31rpm	0.6	1.2	4.3	9.0	15	21	26
52rpm	1.0	2.1	7.3	15	24	35	44
220rpm	4.4	8.8	31	64	100	150	190

114DV pumphead for continuous tubing for manual (120S) and auto (120U) variable speed pumps — Tube bore and flow rates (ml/min)
Speed rpm	0.5mm	0.8mm	1.6mm	2.4mm	3.2mm	4.0mm	4.8mm
1 - 200rpm	0.02 - 4.0	0.04 - 8.0	0.14 - 28	0.29 - 58	0.47 - 94	0.67 - 130	0.85 - 170
0.1 - 200rpm	0.002 - 4.0	0.004 - 8.0	0.014 - 28	0.029 - 58	0.047 - 94	0.07 - 130	0.085 - 170

Drive with 400D1 Pumphead performance

400D1 pumphead for continuous tubing for manual (120S) and auto (120U) variable speed pumps — Tube bore and flow rates (ml/min)
	Speed rpm	0.5mm	0.8mm	1.6mm	2.4mm	3.2mm	4.0mm
120S/D1	1 - 200rpm	0.01 – 2.2	0.03 – 5.8	0.11 – 23	0.24 – 49	0.41 – 81	0.59 – 120
120U/D1	0.1 - 200rpm	0.001 – 2.2	0.003 – 5.8	0.011 – 23	0.024 – 49	0.041 – 81	0.059 - 120

Drive with 400DM2 Pumphead performance

400DM2 (twin channel) pumphead for manifold tubing — Tube bore and flow rates per channel (ml/min)
	Speed rpm	0.13mm	0.19mm	0.25mm	0.38mm	0.50mm
120S	1 – 100rpm	0.001-0.1	0.002-0.2	0.004-0.4	0.008-0.8	0.014-1.4
120U	0.1 – 100rpm	0.0001-0.1	0.0002-0.2	0.0004-0.4	0.0008-0.8	0.001-1.4
	Speed rpm	0.64mm	0.76mm	0.89mm	1.02mm	1.14mm
120S	1 – 100rpm	0.022-2.2	0.031-3.1	0.043-4.3	0.055-5.5	0.070-7.0
120U	0.1 – 100rpm	0.002-2.2	0.003-3.1	0.004-4.3	0.006-5.5	0.007-7.0
	Speed rpm	1.30mm	1.42mm	1.52mm	1.65mm	1.85mm
120S	1 – 100rpm	0.089-8.9	0.110-11	0.120-12	0.140-14	0.180-18
120U	0.1 – 100rpm	0.009-8.9	0.011-11	0.012-12	0.014-14	0.018-18
	Speed rpm	2.06mm	2.29mm	2.54mm	2.79mm
120S	1 – 100rpm	0.210-21	0.250-25	0.310-31	0.360-36
120U	0.1 – 100rpm	0.021-21	0.025-25	0.031-31	0.036-36

Drive with 400DM3 Pumphead performance

400DM3 (three channel) pumphead for manifold tubing — Tube bore and flow rates per channel (ml/min)
	Speed rpm	0.13mm	0.19mm	0.25mm	0.38mm	0.50mm
120S	1 – 100rpm	0.001-0.1	0.002-0.2	0.004-0.4	0.008-0.8	0.014-1.4
120U	0.1 – 100rpm	0.0001-0.1	0.0002-0.2	0.0004-0.4	0.0008-0.8	0.001-1.4
	Speed rpm	0.64mm	0.76mm	0.89mm	1.02mm	1.14mm
120S	1 – 100rpm	0.022-2.2	0.031-3.1	0.043-4.3	0.055-5.5	0.070-7.0
120U	0.1 – 100rpm	0.002-2.2	0.003-3.1	0.004-4.3	0.006-5.5	0.007-7.0
	Speed rpm	1.30mm	1.42mm	1.52mm	1.65mm	1.85mm
120S	1 – 100rpm	0.089-8.9	0.110-11	0.120-12	0.140-14	0.180-18
120U	0.1 – 100rpm	0.009-8.9	0.011-11	0.012-12	0.014-14	0.018-18
	Speed rpm	2.06mm	2.29mm	2.54mm	2.79mm
120S	1 – 100rpm	0.210-21	0.250-25	0.310-31	0.360-36
120U	0.1 – 100rpm	0.021-21	0.025-25	0.031-31	0.036-36

Specifications

Technical specifications

	Drive with 102R Pumphead	Drive with 114DV Pumphead	Drive with 400D1 Pumphead	Drive with 400DM2 Pumphead	Drive with 400DM3 Pumphead
Pumphead number of rollers	2	4
Pumphead number of channels	1	1	1	2	3
Max. operating pressure	2 bar	2 bar	2 bar	2 bar	2 bar
Max. operating pressure	30 psi	30 psi	30 psi	30 psi	30 psi
Speed control ratio	32:1, 320:1	200:1, 2000:1	200:1, 2000:1	100:1, 1000:1	100:1, 1000:1
Operating temperature range	5 to 40 °C	5 to 40 °C	5 to 40 °C	5 to 40 °C	5 to 40 °C
Operating temperature range	40 to 104 °F	40 to 104 °F	40 to 104 °F	40 to 104 °F	40 to 104 °F
Weight	1.55 kg	1.5 kg	1.65 kg	1.7 kg	1.7 kg
Weight	3.4 lbs	3.3 lbs	3.6 lbs	3.7 lbs	3.7 lbs
Control options	Automatic variable speed, Fixed speed, Manual variable speed	Automatic variable speed, Fixed speed, Manual variable speed	Automatic variable speed, Manual variable speed	Automatic variable speed, Manual variable speed	Automatic variable speed, Manual variable speed
Drive control options	F, S, U	F, S, U	S, U	S, U	S, U
Standards	CE, cETLus	CE, cETLus	CE, cETLus	CE, cETLus	CE, cETLus
Drive ingress protection	IP31, NEMA 2	IP31, NEMA 2	IP31, NEMA 2	IP31, NEMA 2	IP31, NEMA 2
Humidity	(Non-condensing) 80% up to 31°C (88°F), decreasing linearly to 50% at 40C (104F)	(Non-condensing) 80% up to 31°C (88°F), decreasing linearly to 50% at 40C (104F)	(Non-condensing) 80% up to 31°C (88°F), decreasing linearly to 50% at 40C (104F)	(Non-condensing) 80% up to 31°C (88°F), decreasing linearly to 50% at 40C (104F)	(Non-condensing) 80% up to 31°C (88°F), decreasing linearly to 50% at 40C (104F)
Drive humidity	(Non-condensing) 80% up to 31°C (88°F), decreasing linearly to 50% at 40C (104F)	(Non-condensing) 80% up to 31°C (88°F), decreasing linearly to 50% at 40C (104F)	(Non-condensing) 80% up to 31°C (88°F), decreasing linearly to 50% at 40C (104F)	(Non-condensing) 80% up to 31°C (88°F), decreasing linearly to 50% at 40C (104F)	(Non-condensing) 80% up to 31°C (88°F), decreasing linearly to 50% at 40C (104F)
Noise	<60dB(A) at 1 m	<60dB(A) at 1 m	<60dB(A) at 1 m	<60dB(A) at 1 m	<60dB(A) at 1 m
Drive noise	<60dB(A) at 1 m	<60dB(A) at 1 m	<60dB(A) at 1 m	<60dB(A) at 1 m	<60dB(A) at 1 m
Max. altitude	2000 m	2000 m	2000 m	2000 m	2000 m
Drive power supply	Supplied with 24 VDC mains transformer plug (range 90 to 264 VAC 47 to 63 Hz) which comes with multi-country adaptors	Supplied with 24 VDC mains transformer plug (range 90 to 264 VAC 47 to 63 Hz) which comes with multi-country adaptors	Supplied with 24 VDC mains transformer plug (range 90 to 264 VAC 47 to 63 Hz) which comes with multi-country adaptors	Supplied with 24 VDC mains transformer plug (range 90 to 264 VAC 47 to 63 Hz) which comes with multi-country adaptors	Supplied with 24 VDC mains transformer plug (range 90 to 264 VAC 47 to 63 Hz) which comes with multi-country adaptors

Drive with 102R Pumphead dimensions

Drive with 114DV Pumphead dimensions

Drive with 400D1 Pumphead dimensions

Drive with 400DM2 Pumphead dimensions

Drive with 400DM3 Pumphead dimensions

Materials of construction

Bearings	Stainless steel
Driveshaft	Stainless steel
Driveshaft	Stainless steel
Drive casework	ABS plastic
Drive casework	ABS plastic
Keypad/HMI	Polyester
Drive keypad/HMI	Polyester
Pumphead body assembly	Acetal copolymer (Kematal), Aluminum (anodized), Grilamid PA12, Polyacrylamide—IXEF (PARA), Polycarbonate (PC), Polyethylene (PETG), PVDF
Pumphead guard	Polycarbonate (PC), Polyethylene (PETG)
Pumphead roller assembly	Acetal, MoS2 filled Nylon 6 (Nylatron), Polytetrafluoroethylene (PTFE) filled Polybutylene Terephthalate (PBT)
Pumphead rotor assembly	Aluminum (anodized), FPM rubber, IXEF (Polyarylamide), Polyacrylamide—IXEF (PARA), Polytetrafluoroethylene (PTFE) filled Polybutylene Terephthalate (PBT), PTFE filled PBT, Stainless steel
Pumphead track	Acetal copolymer (Kematal), Aluminum (anodized), Polyacrylamide—IXEF (PARA), PVDF
Spindles	Stainless steel
Springs	Stainless steel

Information listed covers the complete range. For detailed specifications of individual models/components refer to user manual or contact WMFTS representative.

Control

Control options

Key to pump drive control
120F	120S	120U
Fixed speed	Manual variable speed	Auto variable speed

Manual control
Pump drives	120F	120S	120U
Fixed speed (CW direction)	✔
Variable speed 1rpm increments		✔
Variable speed 0.1rpm increments			✔
Numerical speed display		✔	✔
Direction change		✔	✔
Max (prime)		✔	✔
Auto start		✔	✔
Remote control and feedback
Pump drives	120F	120S	120U
Run/stop, direction change, auto/man toggle, alarm			✔
Analogue control
Pump drives	120F	120S	120U
Variable speed 0.1rpm increments			✔
Analogue speed input; 4-20mA, 0-10V			✔
Tacho speed output; 0-5V			✔
Security
Pump drives	120F	120S	120U
Keypad lock to protect set-up		✔	✔

Control Ratio
	120F	120S					120U
Pumphead	N/A	102R	114DV	400D1	400DM2	400DM3	102R	114DV	400D1	400DM2	400DM3
Manual	Fixed	1-32 rpm (32:1)	1-200 rpm (200:1)	1-200 rpm (200:1)	1-100 rpm (100:1)	1-100 rpm (100:1)	0.1-32 rpm (320:1)	0.1-200 rpm (2,000:1)	0.1-200 rpm (2,000:1)	0.1-100 rpm (1,000:1)	0.1-100 rpm (1,000:1)
Automatic	N/A	N/A	N/A	N/A	N/A	N/A	0.01-32 rpm (3,200:1)	0.01-200 rpm (20,000:1)	0.01-200 rpm (20,000:1)	0.01-100 rpm (10,000:1)	0.01-100 rpm (10,000:1)

Literature

Datasheet

120 Drive with 400D1 Pumphead datasheet (US).pdf
PDF - 970.1kb
120 Drive with 102R Pumphead datasheet (US).pdf
PDF - 1.3mb
120 Drive with 400DM2 Pumphead datasheet (US).pdf
PDF - 977.4kb
120 Drive with 114DV Pumphead datasheet (US).pdf
PDF - 1.3mb
120 Drive with 400DM3 Pumphead datasheet (US).pdf
PDF - 1002.4kb

Manuals

120 cased pump manual (EN).pdf
PDF - 3.9mb

Pumpheads

114DV flip-top four roller pumphead

The 114DV single-channel pumphead assures trouble-free continuous tube loading in seconds, high accuracy and repeatable flow. It accepts 1.6mm wall tubing in bores sizes 0.5mm to 4.8mm.

Flow rates from 0.002 to 170 ml/min at 2bar (30psi)
Single-channel pumphead with four rollers for smooth flow
Recommended for continuous duty
Models with occlusion settings for standard

102R single-channel two roller pumphead

The 102R single-channel pumphead with two-roller rotor is suitable for continuous silicone tubing. It accepts tubing in bore sizes 0.5mm to 4.8mm.

Flow rates from 0.003 to 54 ml/min at 2bar (30psi)
Single-channel two roller pumphead
Sprung rotor to maximize tube life

400DM2 twin-channel pumphead

The twin-channel 400DM2 pumphead uses three-bridge manifold tubing. Ideal for ultra-low-flow metering. Available for 120S and 120U drives.

Flow rates from 0.0001 to 36 ml/min per channel
Precision-machined four roller aluminum rotor
Smooth, precise flow

400DM3 three-channel pumphead

The three-channel 400DM3 pumphead uses three-bridge manifold tubing. Ideal for ultra-low-flow metering. Available for 120S and 120U drives.

Flow rates from 0.0001 to 36 ml/min per channel
Precision-machined four roller aluminum rotor
Smooth, precise flow

400D1 single-channel pumphead

The single-channel 400D1 pumphead accepts 1.6mm-wall tubing from 0.5mm to 4.0mm.

This metering pumphead is familiar to users replacing older 101 and 400 series pumps with the 120. Suitable for 120S and 120U drives.

Flow rates from 0.001 to 120 ml/min
Precision-machined four roller aluminum rotor
Quick-release sprung tube clamps
Smooth, precise flow

Drives

120U offers 0.1 to 200rpm manual remote control of the pump in 0.1rpm increments or automatic control in 0.1rpm increments via 4-20mA or 0-10V inputs. All pumpheads are available.
120S offers 1-200rpm operation in 1rpm increments. It features speed scrolling, priming and keypad lock. All pumpheads are available.
120F is offered in five fixed flow rate versions: 10, 17, 31, 52 and 220rpm.

Order Information

Product codes