Valves - connectors

ASEPCONNECT™

Arrange a demo
Arrange a demo

Overview

ASEPCONNECT™ close-coupled aseptic connector

ASEPCO close couple connectors are for connecting flush-mounted probes and instruments to process lines. They are easier to install and clean than the alternatives, and have ASEPCO's patented aseptic seal, which is based on the same reliable seal that you find in our valves.

Features and benefits

  • Clean, aseptic design
  • Aseptic design for use in critical aseptic processing applications
  • Flush-mounted to tank, eliminating dead legs and leakage
  • Easy to place, seal, inspect
  • Our patented sealing face improves gasket sealing edge
  • Large outside diameter to avoid warping (other diameters available)
  • Monel studs prevent galling
  • Clearance slots for use with rupture disks

Technical summary

Mounting typeFlush 
ConnectionWeld-in body with tri-clamp component connection 
Surface finish optionsElectropolished, Max 10 micro-inch Ra (0.25 µm Ra), Max 15 micro-inch Ra (0.375 µm Ra), Max 20 micro-inch Ra (0.5 µm Ra) 
Certification and complianceISO 9001 
StandardsASME BPE, CE-PED 

Technical Summary table lists features available within the range. See ‘Technical specifications’ tab for model specific information.

Share

Specifications

Technical specifications

ASEPCONNECT
Mounting typeFlush 
Sizes0.375", 0.5", 0.75", 1.0", 1.5", 2.0", 2.5", 3.0", 4.0" 
Thickness1" standard height 
ConnectionWeld-in body with tri-clamp component connection 
Operating temperature range -80 to 200 °C
Operating temperature range -112 to 392 °F
Operating gauge pressure range -14.5 to 101.5 psig
Surface finish optionsElectropolished, Max 10 micro-inch Ra (0.25 µm Ra), Max 15 micro-inch Ra (0.375 µm Ra), Max 20 micro-inch Ra (0.5 µm Ra) 
Certification and complianceISO 9001 
StandardsASME BPE, CE-PED 
Weight0.55 - 3.36 kg
Weight1.2 - 7.4 lbs

ASEPCONNECT dimensions

Model # Size A B C D E
inches in (mm) in (mm) in (mm) in (mm) in (mm)
AC04-0001 0.375 0.790 (20.1) 0.275 (7.0) 2.385 (60.6) 0.790 (20.1) 0.750 (19.1)
AC05-0001 0.50 0.790 (20.1) 0.370 (9.4) 2.385 (60.6) 0.790 (20.1) 0.750 (19.1)
AC08-0001 0.75 0.790 (20.1) 0.620 (15.7) 2.385 (60.6) 0.790 (20.1) 0.750 (19.1)
AC10-0001 1.00 1.720 (43.7) 0.870 (22.1) 3.955 (100.5) 1.205 (30.6) 1.154 (29.3)
AC15-0001 1.50 1.720 (43.7) 1.370 (34.8) 3.955 (100.5) 1.205 (30.6) 1.154 (29.3)
AC20-0001 2.00 2.170 (55.1) 1.870 (47.5) 4.500 (114.3) 1.140 (29.0) 1.603 (40.7)
AC25-0001 2.50 2.580 (65.5) 2.370 (60.2) 5.120 (130.0) 1.171 (29.7) 2.370 (60.2)
AC30-0001 3.00 3.070 (78.0) 2.870 (72.9) 5.800 (147.3) 1.171 (29.7) 3.750 (95.3)
AC40-0001 4.00 4.130 (104.9) 3.835 (97.4) 6.845 (173.9) 1.141 (29.0) 5.000 (127.0)

Weights

Size Weight
inches lb (Kg)
0.375 1.2 (.55)
0.50 1.2 (.55)
0.75 1.2 (.55)
1.00 3.0 (1.36)
1.50 3.0 (1.36)
2.00 3.7 (1.68)
2.50 5.7 (2.59)
3.00 5.7 (2.59)
4.00 7.4 (3.36)

Materials of construction

MaterialHastelloy C22, Stainless steel 316L, Stainless steel AL-6XN

Control

Weights

Size ASEPCONNECT
inches lb (Kg)
0.375 1.2 (.55)
0.50 1.2 (.55)
0.75 1.2 (.55)
1.00 3.0 (1.36)
1.50 3.0 (1.36)
2.00 3.7 (1.68)
2.50 5.7 (2.59)
3.00 5.7 (2.59)
4.00 7.4 (3.36)

Literature

Datasheet

  1. ASEPCONNECT datasheet (US).pdf
    PDF - 813.2kb

Recommended Products

  1. Tank-bottom valves

    Tank-bottom valves

    The leading aseptic tank-bottom valve. Available in multiple configurations including custom-machined.

    Valves - tank valves

  2. Sterillite valves

    Sterillite valves

    An integrated steam valve added to our tank-bottom valve. Allows steam-in-place or flush through, without dead legs.

    Valves - tank valves

  3. Tank valve manual actuators

    Tank valve manual actuators

    Manual version AJS actuator series for heavy-duty applications or AKS actuator series for lighter weight needs.

    Valves - actuators

  4. PTFE diaphragms

    PTFE diaphragms

    Long-lasting, quick-change diaphragms. Extremely chemical and steam resistant. Only available for tank valves.

    Valves - diaphragms

  5. Divert valves

    Divert valves

    Designed to allow division and blending of two or three fluid paths in a single assembly. Eliminates dead legs.

    Valves - tank valves

  6. Process valves

    Process valves

    A valve with a simple clamp connection for easy installation. Allows steam-in-place or flush through, without dead legs.

    Valves - tank valves

  7. Insulate valves

    Insulate valves

    Use with freeze tanks or tanks requiring critical temperature control. Extended body and diaphragm.

    Valves - tank valves

  8. Retrofit valves

    Retrofit valves

    Used to add ASEPCO valves to existing tanks. Many different designs to fit your specific situation.

    Valves - tank valves

  9. Zero dead leg valves

    Zero dead leg valves

    For use in situations where sampling, draining, transferring or directing fluid from a line is necessary.

    Valves - tank valves

  10. Point-of-use valves

    Point-of-use valves

    Created for low-point draining or sampling in piping systems, this valve eliminates dead legs and helps promote drainage.

    Valves - tank valves

  11. Tangential valves

    Tangential valves

    Off-center outlet for full drainability when installed on the slope of a vessel head.

    Valves - tank valves

Related Products

  1. ASEPCONNECT™ Inline

    ASEPCONNECT™ Inline

    Close-coupled inline connector for connecting flush-mounted valves to tanks or inline pipes.

    Valves - connectors

  2. ASEPTIPORT probe mount

    ASEPTIPORT probe mount

    For flush-mounted probes and instruments. Save space by attaching multiple 12 mm probes through one connector on your tank.

    Valves - connectors

Our specialists are here to help you succeed.

To order a product or ask a question

Contact our experts