Flexible hose assemblies

FaBLINE

Arrange a demo

Overview

FaBLINE

With excellent flexibility and kink-free design requiring less force to bend than competitor smooth bore products, FaBLINE^TM offers a versatile hose solution throughout production processes. FaBLINE hoses carry up to twice the flow of similar-sized convoluted delivery hoses, providing a faster, more efficient processing solution. For applications where hoses are tasked to dispense highly viscous media in precise quantities, traditional rubber hoses can block or burst. FaBLINE’s low friction, smooth bore construction will minimise back-pressure to avoid downtime and material losses.

Features and benefits

Increased product service life for reduced replacement, downtime and labour costs
Reduced CIP downtime with cost savings on chemicals and utilities
Superior flow rates for shorter load/unload times and lower processing cost
Increased CIP chemical compatibility reduces cycle times and the risk of recall and product spoiling

Technical summary

Nominal bore size	0.25 - 3 in
Outside diameter	11.6 - 92.8 mm
Outside diameter	0.46 - 3.654 in
Max. operating pressure	40 bar
Max. operating pressure	580 psi
Certification and compliance	3.1 Traceability, 3-A 62-02, EC 1935/2004, EC 2023/2006, EN16643:2016, FDA (materials)
Bend radius	19 - 350 mm
Bend radius	0.75 - 13.75 in
Cover	EPDM, Platinum cured silicone rubber

Technical Summary table lists features available within the range. See ‘Technical specifications’ tab for model specific information.

Specifications

Technical specifications

	FaBLINE RC	FaBLINE SI
Nominal bore size	0.375 - 3 in	0.25 - 3 in
Actual bore size	9.7 - 76.8 mm	6.6 - 76.8 mm
Actual bore size	0.3 - 3.024 in	0.26 - 3.024 in
Length	15 - 30 m	15 - 30 m
Length	50 - 100 Ft	50 - 100 Ft
Outside diameter	15.5 - 92.8 mm	11.6 - 92.8 mm
Outside diameter	0.61 - 3.654 in	0.46 - 3.654 in
Max. operating pressure	40 bar	40 bar
Max. operating pressure	580 psi	580 psi
Burst pressure	60 - 160 bar	60 - 160 bar
Burst pressure	868 - 2,320 psi	868 - 2,320 psi
Certification and compliance	3.1 Traceability, 3-A 62-02, EC 1935/2004, EC 2023/2006, EN16643:2016, FDA (materials)	3.1 Traceability, 3-A 62-02, EC 1935/2004, EC 2023/2006, EN16643:2016, FDA (materials)
Operating temperature range	-40 to 150 °C	-73 to 204 °C
Operating temperature range	-40 to 300 °F	-100 to 400 °F
Bend radius	19 - 350 mm	19 - 350 mm
Bend radius	0.75 - 13.75 in	0.75 - 13.75 in
Gamma stability	Not suitable	Not suitable
Autoclave stability	Suitable	Suitable
Cover	EPDM	Platinum cured silicone rubber
Hose external protection options	Protection coil, Safegard, Scuff rings	Protection coil, Safegard, Scuff rings
End fitting	ANSI 150, BSP and NPT threaded fittings, Cam and Groove and dip pipes, DIN 11851 fittings, DIN and JIS swivel flange, Hygienic SMS, IDF fittings, I-line, JIC fittings, RJT fittings, Sanitary triclamp fittings	ANSI 150, BSP and NPT threaded fittings, Cam and Groove and dip pipes, DIN 11851 fittings, DIN and JIS swivel flange, Hygienic SMS, IDF fittings, I-line, JIC fittings, RJT fittings, Sanitary triclamp fittings
Labelling options	Color coding, Standard	Color coding, Standard, Streamline tagging
Vacuum resistance	Vacuum resistant to -0.9bar	Vacuum resistant to -0.9bar

PTFE liner tubes are chemically resistant to all CIP, SIP and Autoclave conditions. Static build-up is prevented in FaBLINE hoses during steam or dry air purging by their conductive liners. Assemblies are electrically continuous between ends as standard and designated M/Ω-L according to EN16643. Customers are advised to ensure appropriate grounding at the hose ends.

Frequent and rapid phase change in the transported media from liquid to gas and back, could shorten the expected hose life. Customers should inform Aflex Hose of the process details to confirm suitability prior to ordering.

FaBLINE hoses are not suitable for exposure to high energy radioactive sources, including Gamma radiation which embrittles PTFE.