Flexible hose assemblies

Smoothbore PTFE hose

Arrange a demo
Arrange a demo

Overview

Smoothbore

PTFE-lined hose for automotive and general purpose applications

Smoothbore hose comprises a straight PTFE tube liner and a stainless steel outer braid. It is the basic PTFE hose design being used successfully in many automotive and general-purpose applications. Other applications include use with high-pressure steam and gases, refrigerants, hot oils, and other hot or corrosive fluids.

Features and benefits

  • PTFE-lined high pressure hose
  • Temperature resistant
  • Chemical resistant
  • Self-cleaning

Technical summary

Nominal bore size0.0625 - 2 in
Outside diameter5 - 56.4 mm
Outside diameter0.197 - 2.221 in
Max. operating pressure540 bar
Max. operating pressure7800 psi
Certification and compliance3.1 Traceability, EN16643:2016, FDA (materials), SAE J1401, SAE J1737, TS 16949:2016 
Bend radius11 - 1,200 mm
Bend radius0.5 - 47.25 in
BraidDouble, Single 
CoverEPDM rubber, Flexible PVC, Hytrel, Nylon II, Sarlink, Silicone rubber 

Technical Summary table lists features available within the range. See ‘Technical specifications’ tab for model specific information.

Share

Performance

Performance

Standard wall, single braid (SW, SB)
Bore size (Nominal) Bore size (Actual) Dash size ref (if any) PTFE tube wall thickness Braid outside diameter Minimum bend radius Maximum working pressure Weight per unit length *Part number
mm in mm in mm in mm in bar psi kg/mt lbs/ft
1/8 3.17 0.125 - 0.76 0.030 5.85 0.230 22 7/8 290 4,220 0.065 0.044 70-100-02-01-02
3/16 4.76 0.188 - 0.76 0.025 7.40 0.291 40 15/8 265 3,856 0.080 0.054 70-100-03-01-02
1/4 6.35 0.250 - 0.63 0.025 8.50 0.335 60 23/8 240 3,492 0.093 0.062 70-100-04-01-02
5/16 7.94 0.313 - 0.63 0.025 10.15 0.400 70 27/8 200 2,910 0.110 0.074 70-100-05-01-02
3/8 9.53 0.375 - 0.63 0.025 11.75 0.463 80 32/8 190 2,765 0.124 0.083 70-100-06-01-02
1/2 12.70 0.500 - 0.76 0.030 14.95 0.589 110 43/8 140 2,030 0.207 0.139 70-100-08-01-02
5/8 15.88 0.625 - 0.76 0.030 18.35 0.722 150 6 110 1,601 0.255 0.171 70-100-10-01-02
3/4 19.05 0.750 - 0.76 0.030 21.65 0.852 200 77/8 80 1,164 0.315 0.211 70-100-12-01-02
1 25.40 1.000 - 1.00 0.039 28.15 1.108 300 117/8 55 800 0.430 0.288 70-100-16-01-02
Heavy Wall, single braid (HW, SB)
Bore size (Nominal) Bore size (Actual) Dash size ref (if any) PTFE tube wall thickness Braid outside diameter Minimum bend radius Maximum working pressure Weight per unit length *Part number
mm in mm in mm in mm in bar psi kg/mt lbs/ft
1/8 3.17 0.125 - 1.00 0.039 6.10 0.240 20 7/8 290 4,220 0.068 0.046 70-200-02-01-02
3/16 4.76 0.188 - 1.00 0.039 7.65 0.301 29 11/8 270 3,929 0.087 0.058 70-200-03-01-02
1/4 6.35 0.250 - 1.00 0.039 9.25 0.364 30 12/8 260 3,783 0.113 0.076 70-200-04-01-02
5/16 7.94 0.313 - 1.00 0.039 10.90 0.429 40 15/8 230 3,347 0.135 0.091 70-200-05-01-02
3/8 9.53 0.375 - 1.00 0.039 12.50 0.492 55 22/8 200 2,910 0.153 0.103 70-200-06-01-02
1/2 12.70 0.500 - 1.00 0.039 15.60 0.614 85 33/8 160 2,328 0.240 0.161 70-200-08-01-02
5/8 15.88 0.625 - 1.30 0.051 19.10 0.752 110 43/8 130 1,892 0.292 0.196 70-200-10-01-02
3/4 19.05 0.750 - 1.30 0.051 22.05 0.868 145 56/8 92 1,339 0.344 0.231 70-200-12-01-02
1 25.40 1.000 - 1.50 0.059 28.80 1.134 260 102/8 69 1,004 0.470 0.315 70-200-16-01-02
Medium wall, single braid (MW, SB), also referred to as Hyperline SB
The Hyperline MW, SB Range meets or exceeds SAE 100R14 standard.

Bore size (Nominal)
BB=Big Bore

 Bore size (Actual) Dash size ref (if any) PTFE tube wall thickness Braid outside diameter Minimum bend radius Max working pressure Weight per unit length *Part number
mm in mm in mm in mm in Bar Psi Kg/mt Lbs/Ft
1/16 BB 2.0 0.079 -2 1.00 0.040 5.00 0.197 13 1/2 450 6,500 0.045 0.030 70-300-02-01-02
1/8 BB 3.5 0.138 -3 1.00 0.040 6.45 0.254 20 3/4 350 5,076 0.070 0.047 70-300-03-01-02
3/16 BB 5.0 0.200 -4 0.76 0.030 7.65 0.301 45 13/4 290 4,206 0.078 0.052 70-400-03-01-02
1/4 BB 6.7 0.264 -5 0.76 0.030 9.30 0.366 60 23/8 240 3,480 0.110 0.074 70-400-04-01-02
5/16 BB 8.4 0.335 -6 0.76 0.030 10.72 0.422 70 23/4 220 3,190 0.136 0.091 70-400-05-01-02
3/8 BB 10.0 0.394 -7 0.76 0.030 12.75 0.500 80 3 190 2,755 0.166 0.111 70-400-06-01-02
1/2 BB 13.3 0.536 -10 0.76 0.030 16.35 0.644 130 5 150 2,175 0.210 0.141 70-400-08-01-02
5/8 BB 16.5 0.654 -12 0.84 0.033 19.50 0.768 163 61/2 130 1,885 0.280 0.188 70-400-10-01-02
3/4 BB 19.8 0.780 - 1.00 0.040 22.50 0.860 180 7 110 1,595 0.327 0.219 70-400-12-01-02
1 BB 26.4 1.040 - 1.00 0.040 30.10 1.190 230 9 80 1,160 0.524 0.351 70-400-16-01-02
* For Anti-Static Grade, add 10 to the 3-digit part number e.g. 70-100- becomes 70-110 * For Anti-Static Grade, add 10 to the 3-digit part number e.g. 70-100- becomes 70-110

Specifications

Technical specifications

Standard wall, single braid hosesMedium wall, single braid hosesHeavy wall, single braid hosesStandard wall, double braid hosesMedium wall, double braid hosesHeavy wall, double braid hoses
Nominal bore size0.1875 - 1 in0.0625 - 1 in0.125 - 1 in0.125 - 1 in0.0625 - 1 in0.125 - 2 in
Actual bore size4.76 - 25.4 mm2 - 26.4 mm3.17 - 25.4 mm3.17 - 25.4 mm2 - 26.4 mm3.17 - 50.8 mm
Actual bore size0.188 - 1 in0.079 - 1.04 in0.125 - 1 in0.125 - 1 in0.079 - 1.04 in0.125 - 2 in
Outside diameter7.4 - 28.15 mm5 - 30.1 mm6.1 - 28.8 mm6.85 - 29.6 mm6 - 31.7 mm7.05 - 56.4 mm
Outside diameter0.291 - 1.108 in0.197 - 1.19 in0.24 - 1.134 in0.27 - 1.165 in0.236 - 1.249 in0.278 - 2.221 in
Max. operating pressure265 bar450 bar290 bar360 bar540 bar350 bar
Max. operating pressure2910 psi6500 psi4220 psi5238 psi7800 psi5093 psi
Burst pressure165 - 795 bar240 - 1,350 bar207 - 870 bar210 - 1,080 bar300 - 1,620 bar120 - 1,050 bar
Burst pressure2400 - 8,730 psi3480 - 19,500 psi3012 - 12,660 psi3057 - 15,714 psi4200 - 23,400 psi1746 - 15,279 psi
Certification and compliance3.1 Traceability, EN16643:2016, FDA (materials), SAE J1401, SAE J1737, TS 16949:2016 3.1 Traceability, EN16643:2016, FDA (materials), SAE J1401, SAE J1737, TS 16949:2016 3.1 Traceability, EN16643:2016, FDA (materials), SAE J1401, SAE J1737, TS 16949:2016 3.1 Traceability, EN16643:2016, FDA (materials), SAE J1401, SAE J1737, TS 16949:2016 3.1 Traceability, EN16643:2016, FDA (materials), SAE J1401, SAE J1737, TS 16949:2016 3.1 Traceability, EN16643:2016, FDA (materials), SAE J1401, SAE J1737, TS 16949:2016 
Operating temperature range -73 to 260 °C-73 to 260 °C-73 to 260 °C-73 to 260 °C-73 to 260 °C-73 to 260 °C
Operating temperature range -100 to 500 °F-100 to 500 °F-100 to 500 °F-100 to 500 °F-100 to 500 °F-100 to 500 °F
Bend radius40 - 300 mm13 - 230 mm20 - 260 mm20 - 270 mm11 - 210 mm18 - 1,200 mm
Bend radius1.625 - 11.875 in0.5 - 9 in0.875 - 10.25 in0.875 - 10.75 in0.5 - 8.25 in0.75 - 47.25 in
BraidSingle Single Single Double Double Double 
CoverEPDM rubber, Flexible PVC, Hytrel, Nylon II, Sarlink, Silicone rubber EPDM rubber, Flexible PVC, Hytrel, Nylon II, Sarlink, Silicone rubber EPDM rubber, Flexible PVC, Hytrel, Nylon II, Sarlink, Silicone rubber EPDM rubber, Flexible PVC, Hytrel, Nylon II, Sarlink, Silicone rubber EPDM rubber, Flexible PVC, Hytrel, Nylon II, Sarlink, Silicone rubber EPDM rubber, Flexible PVC, Hytrel, Nylon II, Sarlink, Silicone rubber 
End fittingHydraulic tail end fittings, PTFE tail end fittings Hydraulic tail end fittings, PTFE tail end fittings Hydraulic tail end fittings, PTFE tail end fittings Hydraulic tail end fittings, PTFE tail end fittings Hydraulic tail end fittings, PTFE tail end fittings Hydraulic tail end fittings, PTFE tail end fittings 
Vacuum resistanceVacuum resistant to -0.9bar Vacuum resistant to -0.9bar 

Materials of construction

Liner tubeAntistatic PTFE, HPG PTFE, Natural PTFE
Wire braidAramid fiber, Stainless steel

Literature

Brochures

  1. Smoothbore technical brochure (US).pdf
    PDF - 1.2mb

Datasheet

  1. Smoothbore Heavy Wall, Single Braid Hoses datasheet (US).pdf
    PDF - 265.9kb
  2. Smoothbore Standard Wall, Single Braid Hoses datasheet (US).pdf
    PDF - 265.7kb
  3. Smoothbore Standard Wall, Double Braid Hoses datasheet (US).pdf
    PDF - 265.7kb
  4. Smoothbore Medium Wall, Single Braid Hoses datasheet (US).pdf
    PDF - 265.7kb
  5. Smoothbore Medium Wall, Double Braid Hoses datasheet (US).pdf
    PDF - 265.7kb
  6. Smoothbore Heavy Wall, Double Braid Hoses datasheet (US).pdf
    PDF - 265.9kb

Other Resources

  1. configure-for-abrasion.pdf
    PDF - 232.1kb
  2. configure-for-bend.pdf
    PDF - 164.2kb
  3. length-calculation.pdf
    PDF - 192.4kb
  4. special-usage-conditions-smth.pdf
    PDF - 136.6kb

Related Products

  1. Bioflex Ultra

    Bioflex Ultra

    Smooth bore hose for biopharm and fine chemicals for clean, fast flow of high purity fluids.

    Flexible hose assemblies

  2. Corroflon hose

    Corroflon hose

    Convoluted bore hose for transferring process fluids where a smooth bore is not a specific requirement.

    Flexible hose assemblies

  3. Corroline+ hose

    Corroline+ hose

    Smooth bore hose for chemical and other fluid flow applications where rough usage may occur.

    Flexible hose assemblies

  4. Hyperline FX hose

    Hyperline FX hose

    Smooth bore hose for all applications where improved flexibility and kink resistance are required.

    Flexible hose assemblies

  5. Pharmaline N and X hoses

    Pharmaline N and X hoses

    Smooth bore hose for replacing silicone rubber hoses for improved compatibility and cleanability.

    Flexible hose assemblies

  6. Visiflon hose

    Visiflon hose

    Convoluted bore hose for all applications where a smooth bore and/or high pressures are not required.

    Flexible hose assemblies

Our specialists are here to help you succeed.

To order a product or ask a question

Contact our experts