Flexible hose assemblies

Hyperline FX

Arrange a demo
Arrange a demo

Overview

Hyperline FX

PTFE-lined hose for automotive and general purpose applications

Hyperline FX hose is much more flexible than smoothbore hose, due to the patented design of the PTFE liner, and therefore represents a better alternative in applications where improved flexibility is required. Particularly applicable for the tight configurations increasingly necessary in automotive hose and aerospace hose applications, where space requirements are limited.

Features and benefits

  • Patented liner provides unequalled flexibility and kink resistance
  • Excellent chemical resistance
  • Smooth bore for fast flow and easy clean
  • Resistant to diffusion of liquids and gases

Technical summary

Nominal bore size6 - 25 mm
Nominal bore size0.25 - 1 in
Outside diameter9 - 31.7 mm
Outside diameter0.354 - 1.25 in
Max. operating pressure88 bar
Max. operating pressure1280 psi
Certification and compliance3.1 Traceability, EN16643:2016, FDA (materials), SAE J1737, TS 16949:2016 
Bend radius19 - 150 mm
Bend radius0.75 - 6 in
Braid typeNone 
CoverNone 

Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.

Share

Performance

Hyperline FX Aramid fibre braid (AM) grade hoses performance

Hose Bore Size Actual Hose Bore Size Hose Outside Diameter of Tube or Braid Minimum Bend Radius Maximum Working Pressure (MWP) Burst Pressure Weight per Unit Length *Part Number
in dash size in mm in mm in mm Bar Psi Bar Psi Kg/mtr Lbs/Ft *
1/4 4 0.250 - 0.280 6.35 - 7.12 AM 0.360 - 0.400 9.14 - 10.16 1 1/2 38 77 1116 231 3350 0.056 0.038 92-100-04-01-55-01
5/16 5 0.290 - 0.320 7.36 - 8.13 AM 0.440 - 0.480 11.17 - 12.19 1 1/2 38 74 1073 222 3220 0.075 0.050 92-100-05-01-55-01
3/8 6 0.376 - 0.406 9.55 - 10.32 AM 0.515 - 0.555 13.08 - 14.10 2 50 70 1015 210 3046 0.100 0.094 92-100-06-01-55-01
1/2 8 0.515 - 0.545 13.08 - 13.85 AM 0.655 - 0.695 16.64 - 17.66 3 76 52 754 156 2263 0.140 0.094 92-100-08-01-55-01
5/8 10 0.635 - 0.665 16.13 - 16.89 AM 0.815 - 0.855 20.70 - 21.72 4 100 44 638 132 1915 0.204 0.137 92-100-10-01-55-01
3/4 12 0.760 - 0.790 19.30 - 20.07 AM 0.946 - 0.986 24.03 - 25.05 5 126 36 522 108 1566 0.236 0.158 92-100-12-01-55-01
1 16 1.005 - 1.035 25.52 - 26.29 AM 1.233 - 1.273 31.32 - 32.34 6 150 35 507 105 1523 0.354 0.237 92-100-16-01-55-01

*For anti-static grade, add 10 to the 3-digit part number e.g. 92-100- becomes 92-110.

The performance testing results stated in the above table have been carried out at ambient temperature, in a controlled laboratory environment, using water as the media. We recommend that the customer carries out stringent application performance testing on the hose, using the actual working conditions over a set period of time to validate the hose.

Hyperline FX Stainless steel braid (SS) grade hoses performance

Hose Bore Size Actual Hose Bore Size Hose Outside Diameter of Tube or Braid Minimum Bend Radius Maximum Working Pressure (MWP) Burst Pressure Weight per Unit Length *Part Number
in dash size in mm in mm in mm Bar Psi Bar Psi Kg/mtr Lbs/Ft *
1/4 4 0.250 - 0.280 6.34 - 7.12 SS 0.355 - 0.395 9.02 - 10.04 3/4 19 110 1595 330 4786 0.092 0.062 92-100-04-01-02
5/16 5 0.302 - 0.328 7.66 - 8.33 SS 0.424 - 0.458 10.77 - 11.63 3/4 19 105 1522 315 4569 0.126 0.084 92-100-05-01-02
3/8 6 0.376 - 0.406 9.54 - 10.32 SS 0.502 - 0.542 12.75 - 13.64 1 25 100 1450 300 4351 0.160 0.151 92-100-06-01-02
1/2 8 0.515 - 0.545 13.07 - 13.85 SS 0.655 - 0.695 16.64 - 17.66 1 1/2 38 75 1087 225 3263 0.225 0.151 92-100-08-01-02
5/8 10 0.635 - 0.665 16.12 - 16.89 SS 0.810 - 0.850 20.57 - 21.59 2 50 62 899 186 2698 0.336 0.226 92-100-10-01-02
3/4 12 0.760 - 0.790 19.30 - 20.07 SS 0.950 - 0.990 24.13 - 25.15 2 1/2 63 52 754 156 2263 0.383 0.257 92-100-12-01-02
1 16 1.005 - 1.035 25.52 - 26.29 SS 1.227 - 1.269 31.15 - 32.23 3 75 50 725 150 2176 0.540 0.362 92-100-16-01-02

*For anti-static grade, add 10 to the 3-digit part number e.g. 92-100- becomes 92-110.

The performance testing results stated in the above table have been carried out at ambient temperature, in a controlled laboratory environment, using water as the media. We recommend that the customer carries out stringent application performance testing on the hose, using the actual working conditions over a set period of time to validate the hose.

Performance

Nominal hose size *Actual hose bore size Hose grade Outside diameter of tube or braid Minimum bend radius Maximum workingpressure (MWP) Weight per unit length Hose part number
in mm in mm in mm in mm bar psi kg/mtr lbs/ft
1⁄4 6.0 0.270 6.8 TO 0.354 9.0 11⁄2 38 4 60 0.041 0.027 92-100-04
SS 0.378 9.6 3⁄4 19 88 1,280 0.092 0.062 92-100-04-01-02
AM 0.378 9.6 11⁄2 38 62 900 0.056 0.038 92-100-04-01-55-01
5⁄16 8.0 0.312 7.9 TO 0.394 10.0 11⁄2 38 4 60 0.056 0.037 92-100-05
SS 0.420 10.6 3⁄4 19 84 1,220 0.126 0.084 92-100-05-01-02
AM 0.445 11.3 11⁄2 38 59 850 0.075 0.050 92-100-05-01-55-01
3⁄8 10.0 0.394 10.0 TO 0.492 12.5 2 50 4 60 0.070 0.047 92-100-06
SS 0.534 13.5 1 25 80 1,160 0.160 0.107 92-100-06-01-02
AM 0.534 13.5 2 50 56 810 0.100 0.067 92-100-06-01-55-01
1⁄2 15.0 0.536 13.6 TO 0.640 16.2 3 76 4 58 0.110 0.074 92-100-08
SS 0.690 17.5 11⁄2 38 60 870 0.225 0.151 92-100-08-01-02
AM 0.690 17.5 3 76 42 600 0.140 0.094 92-100-08-01-55-01
5⁄8 16.0 0.658 16.7 TO 0.787 20.0 4 100 3 44 0.161 0.108 92-100-10
SS 0.831 21.1 2 50 50 730 0.336 0.226 92-100-10-01-02
AM 0.831 21.1 4 100 35 510 0.204 0.137 92-100-10-01-55-01
3⁄4 20.0 0.780 19.8 TO 0.913 23.2 5 126 3 44 0.179 0.120 92-100-12
SS 0.953 24.2 21/2 63 42 610 0.383 0.257 92-100-12-01-02
AM 0.953 24.2 5 126 29 430 0.236 0.158 92-100-12-01-55-01
1 25.0 1.023 26.0 TO 1.193 30.3 6 150 2 29 0.268 0.180 92-100-16
SS 1.250 31.7 3 75 40 580 0.540 0.362 92-100-16-01-02
AM 1.250 31.7 6 150 28 400 0.354 0.237 92-100-16-01-55-01
*Hydraulic Bore Size - The actual bore sizes of Hyperline FX hose are slightly larger than the nominal size, to allow the insertion and assembly of standard Hydraulic Fittings, using ferrules supplied by Aflex Hose.

Hyperline FX Tube only (TO) grade hoses performance

Hose Bore Size Actual Hose Bore Size Hose Outside Diameter of Tube or Braid Minimum Bend Radius Maximum Working Pressure (MWP) Burst Pressure Weight per Unit Length *Part Number
in dash size in mm in mm in mm Bar Psi Bar Psi Kg/mtr Lbs/Ft *
1/4 4 0.252 - 0.278 6.39 - 7.06 TO 0.326 - 0.368 8.28 - 9.35 1 1/2 38 6 87 18 261 0.041 0.027 92-100-04
5/16 5 0.308 - 0.333 7.84 - 8.46 TO 0.382 - 0.424 9.72 - 10.77 1 1/2 38 6 87 18 261 0.056 0.037 92-100-05
3/8 6 0.381 - 0.407 9.69 - 10.34 TO 0.475 - 0.511 12.06 - 12.98 2 50 6 87 18 261 0.070 0.047 92-100-06
1/2 8 0.525 - 0.550 13.33 - 13.97 TO 0.620 - 0.668 15.77 - 16.97 3 76 6 87 18 261 0.110 0.074 92-100-08
5/8 10 0.639 - 0.665 16.25 - 16.89 TO 0.770 - 0.811 19.55 - 20.60 4 100 6 87 18 261 0.161 0.108 92-100-10
3/4 12 0.765 - 0.795 19.42 - 20.20 TO 0.895 - 0.941 22.73 - 23.90 5 126 6 87 18 261 0.179 0.120 92-100-12
1 16 1.005 - 1.035 25.77 - 26.55 TO 1.165 - 1.215 29.58 - 30.86 6 150 6 87 18 261 0.268 0.180 92-100-16

*For anti-static grade, add 10 to the 3-digit part number e.g. 92-100- becomes 92-110.

The performance testing results stated in the above table have been carried out at ambient temperature, in a controlled laboratory environment, using water as the media. We recommend that the customer carries out stringent application performance testing on the hose, using the actual working conditions over a set period of time to validate the hose.

Specifications

Technical specifications

Aramid fibre braid (AM) grade hosesStainless steel braid (SS) grade hosesTube only (TO) grade hoses
Nominal bore size6 - 25 mm6 - 25 mm6 - 25 mm
Nominal bore size0.25 - 1 in0.25 - 1 in0.25 - 1 in
Actual bore size6.8 - 26 mm6.8 - 26 mm6.8 - 26 mm
Actual bore size0.27 - 1.023 in0.27 - 1.023 in0.27 - 1.023 in
Length18 m18 m18 m
Length60 Ft60 Ft60 Ft
Outside diameter9.6 - 31.7 mm9.6 - 31.7 mm9 - 30.3 mm
Outside diameter0.378 - 1.25 in0.378 - 1.25 in0.354 - 1.193 in
Max. operating pressure62 bar88 bar4 bar
Max. operating pressure900 psi1280 psi60 psi
Burst pressure84 - 186 bar120 - 264 bar6 - 12 bar
Burst pressure1200 - 2,700 psi1740 - 3,840 psi87 - 180 psi
Certification and compliance3.1 Traceability, EN16643:2016, FDA (materials), SAE J1737, TS 16949:2016 3.1 Traceability, EN16643:2016, FDA (materials), SAE J1737, TS 16949:2016 3.1 Traceability, EN16643:2016, FDA (materials), SAE J1737, TS 16949:2016 
Operating temperature range -73 °C to 180 °C-73 °C to 260 °C-73 °C to 260 °C
Bend radius38 - 150 mm19 - 75 mm38 - 150 mm
Operating temperature range -100 °F to 356 °F-100 °F to 500 °F-100 °F to 500 °F
Bend radius1.5 - 6 in0.75 - 3 in1.5 - 6 in
Braid typeNone 
CoverNone None None 
End fittingBSP and NPT threaded fittings, CAM and groove fittings, DIN 11851 fittings, ENCAP end fittings, JIC fittings, PTFE dip pipe fittings, Sanitary triclamp fittings, Swivel flange fittings BSP and NPT threaded fittings, CAM and groove fittings, DIN 11851 fittings, ENCAP end fittings, JIC fittings, PTFE dip pipe fittings, Sanitary triclamp fittings, Swivel flange fittings BSP and NPT threaded fittings, CAM and groove fittings, DIN 11851 fittings, ENCAP end fittings, JIC fittings, PTFE dip pipe fittings, Sanitary triclamp fittings, Swivel flange fittings 
Vacuum resistanceVacuum resistant to -0.9 bar up to 150 °C (302 °F) 

Materials of construction

Liner tubeAnti-static PTFE, Natural PTFE
BraidAramid fibre, Stainless steel

Literature

Brochures

  1. Hyperline FX technical brochure (EN).pdf
    PDF - 987.8kb
  2. Aflex Automotive Brochure (EN).pdf
    PDF - 1.6mb

Datasheet

  1. Hyperline FX Stainless steel braid (SS) grade hoses (EN).pdf
    PDF - 212.9kb
  2. Aramid Fibre Braid (AM) Grade Hoses datasheet (EN).pdf
    PDF - 188.3kb
  3. Hyperline FX Tube only (TO) grade hoses (EN).pdf
    PDF - 134.5kb

Other Resources

  1. configure-for-abrasion.pdf
    PDF - 232.1kb
  2. configure-for-bend.pdf
    PDF - 164.2kb
  3. length-calculation.pdf
    PDF - 192.4kb
  4. special-usage-conditions-hypx.pdf
    PDF - 137.1kb

Options and accessories

Braids, Covers and External Protections

Hose
  Bioflex Ultra Pharmaline N Pharmaline X FaBLINE Corroflon Corroline+ Smoothbore Hyperline FX Visiflon
Tube only -TO ✔       ✔   ✔ ✔ ✔
Stainless Steel - SS ✔       ✔   ✔ ✔ ✔
Rubber Covered - RC ✔     ✔ ✔ ✔      
Polypropylene Braid - PB ✔       ✔        
Platinum Cured - SI ✔ ✔ ✔ ✔ ✔        
Braids
  Bioflex Ultra Pharmaline N Pharmaline X FaBLINE Corroflon Corroline+ Smoothbore Hyperline FX Visiflon
Plastic Rubber option         ✔   ✔ ✔  
Aramid               ✔  
Kynar Braid         ✔        
Hastelloy Braid         ✔        
Blue EPDM ✔     ✔ ✔        
Black EPDM ✔       ✔ ✔      
External protections
  Bioflex Ultra Pharmaline N Pharmaline X FaBLINE Corroflon Corroline+ Smoothbore Hyperline FX Visiflon
Safeguard Protection Sleeve - SG ✔ ✔ ✔ ✔ ✔ ✔      
Scuff Ring - SR ✔ ✔ ✔ ✔ ✔ ✔      
Protection Coil - PC ✔ ✔ ✔ ✔ ✔ ✔      
Double Rubber Cover End Protection - RC300 ✔   ✔ ✔ ✔ ✔      
Double Rubber Cover End Protection - DBK300 ✔       ✔   ✔ ✔ ✔

 

End Fittings

  Bioflex Ultra Pharmaline N Pharmaline X FaBLINE Corroflon Corroline+ Smoothbore Hyperline FX Visiflon
Swivel Flange Fittings - Non-Lined ✔ ✔ ✔ ✔ ✔ ✔      
Swivel Flange Fittings - Lined ✔     ✔ ✔ ✔      
Cam & Groove Fittings Male Non-Lined ✔ ✔ ✔ ✔ ✔ ✔      
Cam & Groove Fittings Male Lined ✔     ✔ ✔ ✔      
Cam & Groove Fittings Female Non-lined ✔ ✔ ✔ ✔ ✔ ✔      
Cam & Groove Fittings Female Lined ✔     ✔ ✔ ✔      
Sanitary Triclamp Fittings PTFE Lined and Flared ✔     ✔ ✔        
Sanitary Triclamp Fittings - Non-Lined ✔ ✔ ✔ ✔ ✔ ✔      
Sanitary & Mini Sanitary ✔ ✔ ✔ ✔ ✔ ✔      
Sanitary Triclamp Fittings - 90° Elbow Fitting ✔ ✔ ✔ ✔ ✔ ✔      
DIN 11851 / SMS Fittings - PTFE Lined ✔     ✔ ✔        
DIN 11851 Fittings - Non-Lined ✔ ✔ ✔ ✔ ✔ ✔      
RJT Female Fittings - Non-lined ✔ ✔ ✔ ✔ ✔ ✔      
BSP & NPT Threaded Fittings - NPT & BSPT Fittings ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
BSP & NPT Threaded Fitting - BSP 60° Cone seat female fittings ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
JIC Fittings ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
PTFE Dip Pipe Fittings ✔ ✔ ✔ ✔ ✔        
3-A Sanitary Fittings ✔ ✔ ✔ ✔          
90° Elbow Fitting ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Grooved Standpipe Fittings ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
IDF Female / Male - Non-lined ✔ ✔ ✔ ✔ ✔        
ENCAP Fittings ✔ ✔ ✔ ✔ ✔        
PTFE Tail or Hydraulic Fittings             ✔ ✔ ✔
PTFE Tail Fittings         ✔   ✔ ✔ ✔

Related Products

  1. Smoothbore hose

    Smoothbore hose

    Smooth bore hose for most automotive and general purpose applications. Usable at high pressures​.

    Flexible hose assemblies

  2. Visiflon hose

    Visiflon hose

    Convoluted bore hose for all applications where a smooth bore and/or high pressures are not required.

    Flexible hose assemblies

Our specialists are here to help you succeed.

To order a product or ask a question

Contact our experts