530 process pumps
Flow rates to 3.5 L/min (55 USGPH) and pressures up to 7 bar (100 psi). Precise 2,200:1 speed control range.
Pumps - cased pumps
Call +603 55 69 9650
Developed for the biopharmaceutical industry, Pumpsil is exceptionally pure tubing offering an ultra-smooth bore which helps minimise protein binding and ensure high purity in the finished product.
Pumpsil is widely used for single-use biopharm applications, as well as pH control and media feed in fermentation, accurate metering, transfer and filtration. Absolute traceability with laser-etched part number, lot number and use-by-date. Fully documented biocompatibility and comprehensive validation pack.
Spallation | Low |
Certification and compliance | FDA 21CFR177.2600, Ph. Eur. 3.1.9, Regulation (EC) No 1935/2004, USP Class VI |
Shelf life | 5 years |
Gamma stability | 25 kGy to 50 kGy |
Autoclave stability | 121 °C 30 minutes |
Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.
Pumpsil | Pumpsil Elements | |
Bore size | 0.5 - 25.4 mm | 0.5 - 25.4 mm |
Bore size | 0.02 - 1 in | 0.02 - 1 in |
Wall thickness | 1.6 - 4.8 mm | 2.4 - 4.8 mm |
Wall thickness | 0.063 - 0.188 in | 0.094 - 0.188 in |
Length | 3 - 152 m | |
Colour | Colourless | Colourless |
Transparency | Translucent | Translucent |
Spallation | Low | Low |
Certification and compliance | FDA 21CFR177.2600, Ph. Eur. 3.1.9, Regulation (EC) No 1935/2004, USP Class VI | FDA 21CFR177.2600, Ph. Eur. 3.1.9, Regulation (EC) No 1935/2004, USP Class VI |
Operating temperature range | -20 °C to 80 °C | -20 °C to 80 °C |
Operating temperature range | -4 °F to 176 °F | -4 °F to 176 °F |
Hardness, shore A (5sec) | 60 | 60 |
Specific gravity | 1.16 g/ml | 1.16 g/ml |
UV resistance | Excellent | Excellent |
Tear B | 0.02 - 0.06 kN/m | 0.02 - 0.06 kN/m |
Tear B | 200-500 ppi | 200-500 ppi |
Ultimate tensile strength | 1306 psi | 1306 psi |
Ultimate tensile strength | 9 MPa | 9 MPa |
Elongation at break | 550-1500 % | 550-1500 % |
Tensile stress at 100% elongation | 8.13 Mpa | 8.13 Mpa |
Tensile stress at 100% elongation | 1180 Psi | 1180 Psi |
Gas permeability rating | Low | Low |
Compression set | 5-42.5 % | 5-42.5 % |
Water absorption | Low | Low |
Shelf life | 5 years | 5 years |
Gamma stability | 25 kGy to 50 kGy | 25 kGy to 50 kGy |
Autoclave stability | 121 °C 30 minutes | 121 °C 30 minutes |
Sterilisation methods | Autoclave, EtO, Gamma | Autoclave, EtO, Gamma |
Tubing | Platinum-cured silicone |
Connector material | Polypropylene, PVDF |
Pumpsil and its raw materials have been tested under a range of pharmacopoeial and non pharmacopoeial standards. These include:
Additional testing carried out includes extractables testing. For a summary of the validation/qualification testing that has been carried out on Pumpsil, please see the summary guide.
The full validation guide including additional information regarding test methods and actual test reports.
Pumpsil, its raw materials and manufacturing process meets a number of regulatory compliance legislations. Specific statements relating to these compliances can be found in the Pumpsil compliance guide which can be requested below.
Pumpsil additionally complies with the legal regulations laid down in the Regulation (EC) No. 1935/2004.
Pumpsil declaration of compliance
Certificate of conformance
Pumpsil platinum-cured silicone tubing validation summary guide
Validation summary guide PDF - 1.3mbOur custom silicone achieves precision, consistency and durability. The tubing is "addition cured" and is entirely free of the 2,4 DCBA residue associated with peroxide tubing. We built an ISO 14644-1 Class 7 clean room air conditioned to maintain constant temperature and humidity.
Our customers can be sure of a product without impurities. Each stage of manufacture is performed by state-of-the-art production machinery, supervised by highly skilled personnel. We achieve an accuracy which is typically a fraction of the published tolerance. 100 % on-line inspection plus off-line checks during every run ensure that all Pumpsil® tubing is validated to the highest standards.
Pumpsil tubing is double-packed in heat-sealed polythene bags in the clean room. The polythene bags are, like the Pumpsil tubing, free of any animal derived components. The bag is labelled with the part number, lot number and use-by date and tube description. The standard coil length is 15Â m (50Â feet) other coil lengths or cut lengths are available on request.
Tubing reels, which include up to 500 feet (152 m) of tubing, are also available for 1.6 mm, 2.4 mm and 3.2 mm wall tubing.
The bagged Pumpsil coils and the reels are packed in a card box outside the clean room. The card boxes are, like the polythene bags, labelled with the Pumpsil part number, lot number, use-by date and tube description. A lot-specific certificate of conformance is included with each pack of tubing.
Full lot traceability is maintained for every batch of tubing produced through detailed raw material and production records, hard copy and electronic production data and retain samples. Also available is a downloadable copy of your certificate of conformance for Watson-Marlow sanitary tubing and sanitary tubing elements.
Traceability is fundamental in the biopharm industry, where validated processes must be demonstrated. In response to this vital requirement from our customers, every Watson-Marlow Pumpsil® tube is permanently laser-marked end-to-end with part number, lot number and use-by date. Laser coding produces an indelible print which uses no ink and has no effect on tube performance. It means that, for the first time, lot traceability is carried through from box to bag to the tube itself.
Also available is a downloadable copy of your certificate of conformance for Watson-Marlow sanitary tubing and sanitary tubing elements.
If you buy large volumes of silicone tubing, Watson-Marlow can supply tubing in the way that best suits your production needs.
Custom Laser Traceability (laser coding on the surface of the tube) ensures that the tubing is identified in the correct way in your process and is fully traceable. For example, laser coding your part number and purchase order guarantees traceability irrespective of whether the tubing has been removed from the packaging or has been used. Unlike some ink-based printing, LaserTraceability cannot be removed by common clean-room solvents such as IPA and will not contaminate your product.
We can provide custom sizes and packaging, and guaranteed response times, delivered on time, every time.
*Reel length varies with tube size
Tube ordering codes | ||||||
---|---|---|---|---|---|---|
Bore | Wall | Coil size | ||||
mm | inch | mm | inch | 15m/50ft | 5m/16ft | 152m/500ft |
0.5 | 1/50 | 1.6 | 1/16 | 913.A005.016 | 913.AJ05.016 | 913.B005.R16 |
0.8 | 1/32 | 1.6 | 1/16 | 913.A008.016 | 913.AJ08.016 | 913.B008.R16 |
1.2 | 3/64 | 1.6 | 1/16 | 913.A012.016 | 913.AJ12.016 | 913.B012.R16 |
1.6 | 1/16 | 1.6 | 1/16 | 913.A016.016 | 913.AJ16.016 | 913.B016.R16 |
2.4 | 3/32 | 1.6 | 1/16 | 913.A024.016 | 913.AJ24.016 | 913.B024.R16 |
3.2 | 1/8 | 1.6 | 1/16 | 913.A032.016 | 913.AJ32.016 | 913.B032.R16 |
4.8 | 3/16 | 1.6 | 1/16 | 913.A048.016 | 913.AJ48.016 | 913.B048.R16 |
6.4 | 1/4 | 1.6 | 1/16 | 913.A064.016 | 913.AJ64.016 | 913.B064.R16 |
122m/400ft | ||||||
8.0 | 5/16 | 1.6 | 1/16 | 913.A080.016 | 913.AJ80.016 | 913.B080.R16 |
152m/500ft | ||||||
0.5 | 1/50 | 2.4 | 3/32 | 913.A005.024 | 913.AJ05.024 | 913.B005.R24 |
0.8 | 1/32 | 2.4 | 3/32 | 913.A008.024 | 913.AJ08.024 | 913.B008.R24 |
1.6 | 1/16 | 2.4 | 3/32 | 913.A016.024 | 913.AJ16.024 | 913.B016.R24 |
3.2 | 1/8 | 2.4 | 3/32 | 913.A032.024 | 913.AJ32.024 | 913.B032.R24 |
122m/400ft | ||||||
4.8 | 3/16 | 2.4 | 3/32 | 913.A048.024 | 913.AJ48.024 | 913.B048.R24 |
91m/300ft | ||||||
6.4 | 1/4 | 2.4 | 3/32 | 913.A064.024 | 913.AJ64.024 | 913.B064.R24 |
61m/200ft | ||||||
8.0 | 5/16 | 2.4 | 3/32 | 913.A080.024 | 913.AJ80.024 | 913.B080.R24 |
46m/150ft | ||||||
9.6 | 3/8 | 2.4 | 3/32 | 913.A096.024 | 913.AJ96.024 | 913.B096.R24 |
3m/10ft | 91m/300ft | |||||
4.8 | 3/16 | 3.2 | 1/8 | 913.A048.032 | 913.A048.I32 | 913.B048.R32 |
61m/200ft | ||||||
6.4 | 1/4 | 3.2 | 1/8 | 913.A064.032 | 913.A064.I32 | 913.B064.R32 |
46m/150ft | ||||||
9.6 | 3/8 | 3.2 | 1/8 | 913.A096.032 | 913.A096.I32 | 913.B096.R32 |
30m/100ft | ||||||
12.7 | 1/2 | 3.2 | 1/8 | 913.A127.032 | 913.A127.I32 | 913.B127.R32 |
15.9 | 5/8 | 3.2 | 1/8 | 913.A159.032 | 913.A159.I32 | - |
8.0 | 5/16 | 4.0 | - | 913.A080.040 | 913.A080.I40 | - |
12.0 | - | 4.0 | - | 913.A120.040 | 913.A120.I40 | - |
16.0 | - | 4.0 | - | 913.A160.040 | 913.A160.I40 | - |
9.6 | 3/8 | 4.8 | 3/16 | 913.A096.048 | 913.A096.I48 | - |
12.7 | 1/2 | 4.8 | 3/16 | 913.A127.048 | 913.A127.I48 | - |
15.9 | 5/8 | 4.8 | 3/16 | 913.A159.048 | 913.A159.I48 | - |
19.0 | 3/4 | 4.8 | 3/16 | 913.A190.048 | 913.A190.I48 | - |
25.4 | 1 | 4.8 | 3/16 | 913.A254.048 | 913.A254.I48 | - |
Pumpsil Double Segment Kynar Y-Element ordering codes | |||||
---|---|---|---|---|---|
Bore | Wall Thickness | Product codes | |||
mm | inch | mm | inch | ||
0.5 | 0.02 | 2.4 | 0.094 | 913.AE05.K24 | |
0.8 | 0.031 | 2.4 | 0.094 | 913.AE08.K24 | |
1.6 | 0.063 | 2.4 | 0.094 | 913.AE16.K24 | |
3.2 | 0.125 | 2.4 | 0.094 | 913.AE32.K24 | |
4.8 | 0.188 | 2.4 | 0.094 | 913.AE48.K24 | |
6.4 | 0.25 | 2.4 | 0.094 | 913.AE64.K24 | |
8 | 0.313 | 2.4 | 0.094 | 913.AE80.K24 | |
8 | 0.313 | 4.0 | 0.156 | 913.AE80.K40 | |
9.6 | 0.375 | 2.4 | 0.094 | 913.AE96.K24 |
Pumpsil Double Y-Element ordering codes | |||||
---|---|---|---|---|---|
Bore | Wall Thickness | Product codes | |||
mm | inch | mm | inch | ||
12 | 0.469 | 4 | 0.156 | 913.A12E.K40 | |
16 | 0.625 | 4 | 0.156 | 913.A16E.K40 |
Pumpsil Loadsure Quick Release Elements ordering codes | ||
---|---|---|
Product Name | Product codes | |
Pumpsil 520 LoadSure 3.2mm Bore Quick Release Element | 913.A032.PFQ | |
Pumpsil 520 LoadSure 6.4mm Bore Quick Release Element | 913.A064.PFQ | |
Pumpsil 520 LoadSure 9.6mm Bore Quick Release Element | 913.A096.PFQ | |
Pumpsil Loadsure Tri-Clamp Elements ordering codes | ||
---|---|---|
Product Name | Product codes | |
Pumpsil 520 LoadSure 3.2mm Bore Tri-Clamp Element | 913.A032.PFT | |
Pumpsil 520 LoadSure 6.4mm Bore Tri-Clamp Element | 913.A064.PFT | |
Pumpsil 520 LoadSure 9.6mm Bore Tri-Clamp Element | 913.A096.PFT | |
Pumpsil 620 LoadSure 12.0mm Bore Tri-Clamp Element | 913.A120.PFT | |
Pumpsil 620 LoadSure 17.0mm Bore Tri-Clamp Element | 913.A170.PFT | |
Pumpsil 720 LoadSure 12.7mm Bore Tri-Clamp Element | 913.A127.PFT | |
Pumpsil 720 LoadSure 15.9mm Bore Tri-Clamp Element | 913.A159.PFT | |
Pumpsil 720 LoadSure 19.0mm Bore Tri-Clamp Element | 913.A190.PFT | |
Pumpsil 720 LoadSure 25.4mm Bore Tri-Clamp Element | 913.A254.PFT |
Pumpsil Loadsure Cam and Groove Elements ordering codes | ||
---|---|---|
Product Name | Product codes | |
Pumpsil 620 LoadSure 12.0mm Bore Cam and Groove Element | 913.A120.PPC | |
Pumpsil 620 LoadSure 17.0mm Bore Cam and Groove Element | 913.A170.PPC | |
Pumpsil 720 LoadSure 12.7mm Bore Cam and Groove Element | 913.A127.PPC | |
Pumpsil 720 LoadSure 15.9mm Bore Cam and Groove Element | 913.A159.PPC | |
Pumpsil 720 LoadSure 19.0mm Bore Cam and Groove Element | 913.A190.PPC | |
Pumpsil 720 LoadSure 25.4mm Bore Cam and Groove Element | 913.A254.PPC |
Flow rates to 3.5 L/min (55 USGPH) and pressures up to 7 bar (100 psi). Precise 2,200:1 speed control range.
Pumps - cased pumps
Flow rates to 18 L/min (4.76 USGPM) and pressures up to 4 bar (60 psi). Precise 2,650:1 speed control range.
Pumps - cased pumps
Flow rates to 33 L/min (8.8 USGPM) and pressures up to 2 bar (30 psi). Precise 3,600:1 speed control range.
Pumps - cased pumps
Thermoplastic tubing with long peristaltic life and low permeability. 5 ºC to 80 ºC (23 ºF to 176 ºF).
Tubing - peristaltic
Reinforced silicone tubing ideal for biopharmaceutical applications. -20 ºC to 80 ºC (-4 ºF to 176 ºF) to 7 bar (100 psi).
Tubing - peristaltic
Reinforced fluroelastomer tubing with extreme chemical resistance. -20 ºC to 80 ºC (-4 ºF to 176 ºF) to 4 bar (60 psi).
Tubing - peristaltic
Thermoplastic elastomer tubing especially resistant to oxidizing agents. 5 ºC to 80 ºC (23 ºF to 176 ºF) to 7 bar (100 psi).
Tubing - peristaltic
High performance TPE tubing with exceptional life and accurate flow rates. Weldable and sealable for sterile connectivity.
Tubing - peristaltic
High quality silicone and chemical resistant TPE tubing. Over 50 bore/wall sizes and element lengths available.
Tubing - peristaltic
To order a product or ask a question