Pumps - panel mount pumps

500 series panel mount pumps

Overview

500 series high-flow pumps

500 series pumps comprise a choice of pumpheads made from chemical resistant materials. A wide range of powerful AC, DC and brushless DC drives provide power and control options for flow rates up 3,500 mL/min. Changing a tube is the only routine maintenance required.

Pumpheads

520R/R2 pumpheads feature two sprung rollers and transparent cover so you can see the pump running easily. Pumpheads accept eight sizes of continuous tubing up to 9.6 mm bore. 520R for 1.6 mm wall and 520R2 for 2.4 mm wall thickness tubing for lower inlet pressure or higher viscosity.
520RE LoadSure® element pumpheads guarantee perfect tube loading, one-minute maintenance and pressure up to 7 bar (dependant on the choice of drive);
- 520REL—LoadSure® elements for 0–2 bar operation
- 520REM—LoadSure® Elements for 0–4 bar operation
- 520REH—LoadSure® Elements for 0–7 bar operation

Drives

520DriveSure: 12 V to 48 V DC integrated BLDC motor with Industrial Ethernet and analogue control options, sealed mounting plate and PC software (WM Connect). Flow rates up to 3,500 mL/min
520VBM: 24 V brushless DC drives with two maximum speeds, flow rates up to 2,850 mL/min
520FAM: 50 Hz or 60 Hz single phase, induction motor drive in five maximum speeds, flow rates up to 2170 mL/min
520FDM: 12 V and 24 V DC drives in four maximum speeds, flow rates up to 3,450 mL/min

Technical summary

Motor types	Brushless DC motor, DriveSure brushless DC motor, Fixed speed DC motor, Synchronous AC motor, Variable speed brushless DC motor
Pumphead options	505L, 520R, 520R2, 520REH, 520REL, 520REM
Standards	BS EN 55011-2016+A2-2021, BS EN 61010-1, BS EN IEC 61326-1-2021, CAN/CSA C22.2 No 61010-1, CE, CSA C22.2 No. 61010-1-12/AMD1:2018, EN 61010-1:2010/A1:2019, FCC 47CFR (Part 15), IEC 61010-1, IEC 61010-1:2010/AMD1:2016, RoHS, UL 61010-1, UL 61010-1:2012/R:2

Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.

Performance

500DriveSure performance

Flow rates (ml/min) Tubing 1.6mm wall
Tube bore (mm)	Speed (rpm)
Tube bore (mm)	8	220
0.5	0.33	9.50
0.8	0.84	24
1.6	3.40	97
3.2	13	390
4.8	30	870
6.4	54	1500
8.0	84	2400

Flow rates (ml/min) Tubing 2.4mm wall
Tube bore (mm)	Speed (rpm)
Tube bore (mm)	8	220
0.5	0.33	9.50
0.8	0.84	24
1.6	3.40	97
3.2	13	390
4.8	30	870
6.4	54	1500
8.0	84	2400
9.6	120	3500

Flow rates are for guidance only at 0 bar. Always test pumphead flow capability in the relevant fluid system

500 DriveSure ADC/En/Pn performance

520R Pumphead for continuous tubing (1.6 mm wall thickness) up to 2 bar (29 PSI)
Tube material	Flow Rate (mL/min) by tube bore from 0.1 rpm (Min) to 220 rpm (Max)
	0.5 mm		0.8 mm		1.6 mm		3.2 mm		4.8 mm		6.4 mm		8.0 mm
	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max
Pumpsil®	0.004	9.5	0.011	24	0.04	97	0.18	390	0.40	870	0.70	1500	1.10	2400
STA-PURE® PCS
STA-PURE® PFL
Marprene®	0.004	9.0	0.011	24	0.04	92	0.17	370	0.38	830	0.67	1500	1.10	2300
Bioprene®	0.004	9.0	0.011	24
PureWeld XL®	0.004	9.0

520R2 Pumphead for continuous tubing (2.4 mm wall thickness) up to 2 Bar (29 PSI)
Tube material	Flow Rate (mL/min) by tube bore from 0.1 rpm (Min) to 220 rpm (Max)
	0.5 mm		0.8 mm		1.6 mm		3.2 mm		4.8 mm		6.4 mm		8.0 mm		9.6 mm
	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max
Pumpsil®	0.004	9.5	0.011	24	0.04	97	0.18	390	0.40	870	0.7	1500	1.10	2400	1.60	3500
STA-PURE® PCS
STA-PURE® PFL
Marprene®					0.04	92	0.17	370	0.38	830	0.67	1500	1.10	2300	1.50	3300
Bioprene®
PureWeld XL®

520REL Pumphead for LoadSure TL elements up to 2 Bar (29 PSI)
LoadSure element	Flow Rate (mL/min) by tube bore from 0.1 rpm (Min) to 220 rpm (Max)
	3.2 mm		6.4 mm		9.6 mm
	Min	Max	Min	Max	Min	Max
Pumpsil®	0.18	390	0.70	1500	1.60	3500
STA-PURE® PCS
STA-PURE® PFL
Marprene®	0.17	370	0.67	1500	1.50	3300
Bioprene®	0.17	370	0.67	1500	1.50	3300

520REM Pumphead for LoadSure TM elements up to 4 Bar (58 PSI)
LoadSure element	Flow Rate (mL/min) by tube bore from 0.1 rpm (Min) to 220 rpm (Max)
	3.2 mm		6.4 mm
	Min	Max	Min	Max
STA-PURE® PCS	0.18	390	0.70	1500
STA-PURE® PFL	0.18	390	0.70	1500
Marprene®	0.17	370	0.67	1500
Bioprene®	0.17	370	0.67	1500

Performance data is based on a 48 V DC power supply, pumping water, with 0 bar inlet and discharge pressure. Actual performance is dependent on power supply voltage (DriveSure range 12 V to 48 V DC). For further information contact your local Watson-Marlow representative.

500 FAM heavy duty pump performance

Marprene tubing 2.4 mm (3/32in) wall, zero pressure and no suction height
ml/min tubing dimensions		0.5 mm	0.8 mm	1.6 mm	3.2 mm	4.8 mm	6.4 mm	8.0 mm	9.6 mm
FAM 50HZ	37 rpm	1.5	3.9	15	62	140	250	390	550
	75 rpm	3.1	7.8	31	130	280	510	780	1120
	145 rpm	5.9	15	61	240	550	990	1520	2170
FAM 60HZ	42 rpm	1.7	4.4	18	70	160	290	440	630
FAM 60HZ	85 rpm	3.5	8.8	35	140	320	580	890	1270

For Pumpsil, Tygon, Sta-Pure and Chem-Sure flowrates, add 5% to the above figures.

For pressure performance see pumphead datasheet.

500 FDM heavy duty pump performance

Marprene tubing 2.4 mm (3/32in) wall, zero pressure and no suction height
ml/min tubing dimensions		0.5 mm	0.8 mm	1.6 mm	3.2 mm	4.8 mm	6.4 mm	8.0 mm	9.6 mm
FDM 12/24 VDC	45 rpm	1.8	4.7	19	76	170	310	470	670
	90 rpm	3.7	9.4	38	150	340	610	940	1350
	175 rpm	7.2	18	73	290	660	1190	1830	2620
	230 rpm	9.4	24	96	390	870	1570	2400	3450

For Pumpsil, Tygon, Sta-Pure and Chem-Sure flowrates, add 5% to the above figures.

For pressure performance see pumphead datasheet.

500 VBM heavy duty pump performance

Marprene tubing 2.4 mm (3/32in) wall, zero pressure and no suction height
ml/min tubing dimensions		0.5 mm	0.8 mm	1.6 mm	3.2 mm	4.8 mm	6.4 mm	8.0 mm	9.6 mm
VBM 24 VDC	100 rpm	4.1	10.5	42	170	380	680	1040	1500
VBM 24 VDC	190 rpm	7.8	20	79	320	720	1295	1980	2850

For Pumpsil, Tygon, Sta-Pure and Chem-Sure flowrates, add 5% to the above figures.

For pressure performance see pumphead datasheet.

Specifications

Technical specifications

	500 DriveSure ADC/En/Pn	500 FAM heavy duty pump	500 FDM heavy duty pump	500 VBM heavy duty pump
Motor types	Brushless DC motor	Synchronous AC motor	Fixed speed DC motor	Variable speed brushless DC motor
Pumphead options	520R, 520R2, 520REL, 520REM	520R, 520R2, 520REH, 520REL, 520REM	520R, 520R2, 520REH, 520REL, 520REM	520R, 520R2, 520REH, 520REL, 520REM
Pumphead number of rollers		2	2	2
Pumphead number of channels		1	1	1
Flow rate range	0.004 ml/min to 3500 ml/min	1.5 ml/min to 2170 ml/min	1.8 ml/min to 3450 ml/min	4.1 ml/min to 2850 ml/min
Operating speed range	0.1 rpm to 220 rpm	37 rpm to 290 rpm	45 rpm to 230 rpm	100 rpm to 360 rpm
Speed Resolution	0.1 rpm
Supply voltage	12 V to 48 V DC	115 V AC, 60 Hz, 230 V AC, 50 Hz	12 V DC, 24 V DC	24 V DC
Operating temperature range	5 °C to 40 °C	-10 °C to 40 °C	-10 °C to 40 °C	-10 °C to 40 °C
Operating temperature range	41 °F to 104 °F	14 °F to 104 °F	14 °F to 104 °F	14 °F to 104 °F
Rated Power	75 W
Power consumption		20W - 40W	30W	35W
Control options	0–10 V, 2–2000 Hz, 4–20 mA, EtherNet/IP™, Fixed speed, Prime speed, PROFINET®			0–4 V
Alarms	Cover-open, Hardware fault, Over current, Over temperature, Software fault, Speed, Stall, Under/over voltage
Outputs	Fault, Tacho			Tacho
External Inputs	Prime switch
Weight	2.9 - 3 kg
Weight	5.291 - 6.614 lbs
Location	Indoor, Enclosure
Ingress Protection	IP66 capable panel sealing	IP41	IP41	IP41
Humidity	80 % up to 31 °C (88 °F), decreasing linearly to 50 % at 40 °C (104 °F)
Noise	<65 dB(A)
Max. altitude	2000 m
Max. altitude	6561 ft
Gearbox ratio		Spur; 10:1, Spur; 20:1, Spur; 40:1, Spur; 5:1	Spur; 10:1, Spur; 20:1, Spur; 40:1, Spur; 7.5:1	Spur; 10:1, Spur; 20:1, Spur; 40:1
Standards	BS EN 55011-2016+A2-2021, BS EN IEC 61326-1-2021, CSA C22.2 No. 61010-1-12/AMD1:2018, EN 61010-1:2010/A1:2019, FCC 47CFR (Part 15), IEC 61010-1:2010/AMD1:2016, UL 61010-1:2012/R:2019-07
Certification and compliance	CB Certificate, EMC, NRTL certification
Compatible tubing bore size	0.5, 0.8, 1.6, 3.2, 4.8, 6.4, 8, 9.6 mm	0.5, 0.8, 1.6, 3.2, 4.8, 6.4, 8, 9.6 mm	0.5, 0.8, 1.6, 3.2, 4.8, 6.4, 8, 9.6 mm	0.5, 0.8, 1.6, 3.2, 4.8, 6.4, 8, 9.6 mm
Compatible tubing wall thickness	1.6, 2.4 mm	1.6, 2.4 mm	1.6, 2.4 mm	1.6, 2.4 mm

Outputs are for ADC version only. Alarms are for EtherNet/IP™ & PROFINET® versions only. For detailed specifications of individual models refer to product reference manual or contact WMFTS representative.

500 DriveSure ADC/En/Pn dimensions

A		B		C		D		E		F		G
mm	in	mm	in	mm	in	mm	in	mm	in	mm	in	mm	in
212	8.35	150	5.91	132	5.20	318	12.52	260	10.24	161	6.34	157	6.18

500 FAM heavy duty pump dimensions

	A	B	C
FAM 37 and 42 rpm	68 mm (2.68 in)	100 mm (3.94 in)	⌀ 90
FAM 75, 85, 145 rpm	50 mm (2.68 in)	100 mm (3.94 in)	⌀ 90

	A	B	C
FDM 45 rpm	68 mm (2.68 in)	110 mm (4.33 in)	⌀ 80
FDM 90, 175, 230 rpm	50 mm (1.97 in)	110 mm (4.33 in)	⌀ 80

	A	B	C
VBM 100 rpm	63 mm (2.48 in)	60 mm (2.36 in)	⌀ 70
VBM 190 rpm	45 mm (1.77 in)	60 mm (2.36 in)	⌀ 70

Materials of construction

Pumphead body assembly	Acetal, Aluminium, Aluminium alloy, Brass, Polycarbonate (PC), Polyphenylene sulphide (PPS)
Pumphead rotor assembly	Polyphenylene sulphide (PPS), Stainless steel 316
Pumphead roller assembly	MoS2 filled Nylon 6 (Nylatron), Polyphenylene sulphide (PPS), Stainless steel 316
Tube clamp assembly	Acetal copolymer (Kematal)
Motor Gearbox	Aluminium, Nitrile, Stainless steel
Controller Housing	ABS/PC, Aluminium
Mounting plate assembly	Nitrile, Polyacrylamide (PARA)-halogen free, UL94 V-0 rated, Polyarylamide (halogen free, UL94 V-0 rated), Stainless steel, Thermoplastic elastomer (TPE)

Information listed covers the complete range. For detailed specifications of individual models/components refer to product reference manual or contact WMFTS representative.