Aseptic filling - benchtop fillers

620 series dispensing pumps

Overview

620Di dispensing pumps

620Di pumps combine industrial power and durability with unrivalled precision, pumping up to 18 L/min and achieving pressures up to 4 bar. The pump can store 50 dispensing programs using the simple screen-keypad interface. The pump outputs batch records for cGMP requirements.

  • Accurate, fast dispensing for ultimate batch consistency. Dispenses 500 ml in 3.5 seconds with ±0.5 % accuracy.

Features and benefits

  • Keypad entry of flow from 0.001 L/min to 18 L/min
  • Dispenses 500 ml to within ±0.5 %
  • Stores up to 50 dispensing programs
  • Up to 4 bar pressure
  • 2650:1 control ratio (0.1 to 265 rpm speed range)
  • Digital speed adjustment with choice of 0.1 rpm, 0.5 rpm, 1 rpm, 2 rpm, 5 rpm and 10 rpm step changes
  • Maintenance-free brushless DC motor
  • Smooth easy-to-clean enclosure free from bug traps

Technical summary

Filling volume range Up to 500ml in 2.4s, Up to 500ml in 3.0s ml
Accuracy±0.5 %

Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.

Share

Performance

620Di and 620DiN with 620L pumphead performance

Flow ranges (L/min) Y element tubing Continuous tubing
(over 0.1 to 265rpm speed range) (single channel) (flow per channel - max of 2 channels)
Tubing material 8.0mm 12.0mm 16.0mm 8.0mm 12.0mm 16.0mm
Pumpsil silicone 0.002-4.6 0.003-8.5 0.005-11.5 0.001-2.3 0.002-4.3 0.003-5.8
Marprene, Bioprene 0.002-4.6 0.003-8.5 0.005-11.5 0.001-2.3 0.002-4.3 0.003-5.8
Dose sizes
Tube bore 8.0mm 12.0mm 16.0mm
Minimum possible dose 8ml 16ml 22ml
Minimum recommended 84ml 161ml 218ml

620Di and 620DiN with 620LG pumphead performance

Flow ranges (L/min) Y element tubing Continuous tubing
(over 0.1 to 265rpm speed range) (single channel) (flow per channel - max of 2 channels)
Tubing material 8.0mm 12.0mm 16.0mm 8.0mm 12.0mm 16.0mm
Pumpsil silicone 0.002-4.6 0.003-8.5 0.005-11.5 0.001-2.3 0.002-4.3 0.003-5.8
Marprene, Bioprene 0.002-4.6 0.003-8.5 0.005-11.5 0.001-2.3 0.002-4.3 0.003-5.8
STA-PURE PCS 0.002-5.2 0.003-9.0 0.005-12.4 0.001-2.6 0.002-4.5 0.003-6.2
620LG dose sizes (STA-PURE PCS®, STA-PURE PFL®)
Tube bore 8.0mm 12.0mm 16.0mm
Minimum possible dose 10ml 17ml 23ml
Minimum recommended 99ml 167ml 234ml

620Di and 620DiN with 620R pumphead performance

Flow ranges (L/min) Continuous tubing
(over 0.1 to 265rpm speed range) 620R (2 rollers)
Tubing material 6.4mm 9.6mm 12.7mm 15.9mm
Marprene TL, Bioprene TL 0.001-3.4 0.003-6.6 0.004-11 0.01-12
Pumpsil silicone 0.001-3.2 0.003-7.2 0.004-11 0.01-15
STA-PURE PCS 0.001-3.2 0.003-6.6 0.004-11 0.01-16
Dose sizes
Tube bore 6.4mm (1/4”) 9.6mm (3/8”) 12.7mm (1/2”) 15.9mm (5/8”)
Minimum possible dose 6ml 14ml 21ml 28ml
Minimum recommended 60ml 136ml 208ml 283ml

620Di and 620DiN with 620RE pumphead performance

Flow ranges (L/min) LoadSure™ element tubing
(over 0.1 to 265rpm speed range) 620RE (2 rollers)
Tubing material 12mm 17mm
Marprene TM, Bioprene TM 0.004-9.8 0.01-16
Marprene TL, Bioprene TL 0.004-9.8 0.01-18
Pumpsil silicone 0.004-10 0.01-16
STA-PURE PCS 0.004-11 0.01-18
620RE dose sizes
Tube bore 12mm 17mm
Minimum possible dose 19ml 30ml
Minimum recommended 189ml 302ml

620Di and 620DiN with 620REH pumphead performance

Flow ranges (L/min) LoadSure™ element tubing
(over 0.1 to 265rpm speed range) 620REH (2 rollers)
Tubing material 12mm 17mm
Marprene TM, Bioprene TM 0.003-8.3 0.004-11
Marprene TL, Bioprene TL 0.003-8.3 0.005-12
Pumpsil silicone 0.003-8.7 0.004-11
STA-PURE PCS 0.003-9.0 0.010-13
620RE4 dose sizes
Tube bore 12mm 17mm
Minimum possible dose 16ml 21ml
Minimum recommended 164ml 208ml

Specifications

Technical specifications

620Di and 620DiN with 620L pumphead620Di and 620DiN with 620LG pumphead620Di and 620DiN with 620R pumphead620Di and 620DiN with 620RE pumphead620Di and 620DiN with 620REH pumphead
Filling volume range Up to 500ml in 2.4s mlUp to 500ml in 2.4s mlUp to 500ml in 3.0s mlUp to 500ml in 3.0s mlUp to 500ml in 3.0s ml
Accuracy±0.5 %±0.5 %±0.5 %±0.5 %±0.5 %
Ingress ProtectionIP31, IP66, NEMA 2, NEMA 4X IP31, IP66, NEMA 2, NEMA 4X IP31, IP66, NEMA 2, NEMA 4X IP31, IP66, NEMA 2, NEMA 4X IP31, IP66, NEMA 2, NEMA 4X 
Operating temperature range 5 °C to 40 °C5 °C to 40 °C5 °C to 40 °C5 °C to 40 °C5 °C to 40 °C
Operating temperature range 40 °F to 104 °F40 °F to 104 °F40 °F to 104 °F40 °F to 104 °F40 °F to 104 °F
Speed control ratio2650:1 2650:1 2650:1 2650:1 2650:1 
Humidity(Condensing) 10 to 100 % RH, (Non-condensing) 80 % up to 31 °C (88 °F) decreasing linearly to 50 % at 40 °C (104 °F) (Condensing) 10 to 100 % RH, (Non-condensing) 80 % up to 31 °C (88 °F) decreasing linearly to 50 % at 40 °C (104 °F) (Condensing) 10 to 100 % RH, (Non-condensing) 80 % up to 31 °C (88 °F) decreasing linearly to 50 % at 40 °C (104 °F) (Condensing) 10 to 100 % RH, (Non-condensing) 80 % up to 31 °C (88 °F) decreasing linearly to 50 % at 40 °C (104 °F) (Condensing) 10 to 100 % RH, (Non-condensing) 80 % up to 31 °C (88 °F) decreasing linearly to 50 % at 40 °C (104 °F) 
Noise<70dB(A) at 1m <70dB(A) at 1m <70dB(A) at 1m <70dB(A) at 1m <70dB(A) at 1m 
StandardsCE, cETLus CE, cETLus CE, cETLus CE, cETLus CE, cETLus 
Power supply100 V to 120 V, 200 V to 240 V, 50/60 Hz, Single-phase 100 V to 120 V, 200 V to 240 V, 50/60 Hz, Single-phase 100 V to 120 V, 200 V to 240 V, 50/60 Hz, Single-phase 100 V to 120 V, 200 V to 240 V, 50/60 Hz, Single-phase 100 V to 120 V, 200 V to 240 V, 50/60 Hz, Single-phase 
Weight24.3 - 25.2 kg24.3 - 25.2 kg19.6 - 20.5 kg19.6 - 20.5 kg20.1 - 21 kg
Weight53.6 - 55.6 lbs53.6 - 55.6 lbs43.2 - 45.2 lbs43.2 - 45.2 lbs44.3 - 46.3 lbs
AccessoriesFootswitch, handswitch, RS232 cable, batch records cable Footswitch, handswitch, RS232 cable, batch records cable Footswitch, handswitch, RS232 cable, batch records cable Footswitch, handswitch, RS232 cable, batch records cable Footswitch, handswitch, RS232 cable, batch records cable 
Compatible tubing size12.0 mm ID, 16.0 mm ID, 4.0 mm wall thickness, 8.0 mm ID 12.0 mm ID, 16.0 mm ID, 4.0 mm wall thickness, 8.0 mm ID 12.0 mm ID, 12.7 mm ID, 15.9 mm ID, 17.0 mm ID, 6.4 mm ID, 9.6 mm ID 12.0 mm ID, 12.7 mm ID, 15.9 mm ID, 17.0 mm ID, 6.4 mm ID, 9.6 mm ID 12.0 mm ID, 12.7 mm ID, 15.9 mm ID, 17.0 mm ID, 6.4 mm ID, 9.6 mm ID 

620Di and 620DiN with 620L pumphead dimensions

620Di and 620DiN with 620LG pumphead dimensions

620Di and 620DiN with 620R pumphead dimensions

620Di and 620DiN with 620RE pumphead dimensions

620Di and 620DiN with 620REH pumphead dimensions

Materials of construction

BearingsCarbon steel
CaseworkPressure die-cast aluminium LM24, Pressure die-cast aluminium LM6
Keypad/HMIPolyester
Pumphead roller assemblyNylatron, Stainless steel

Control

Control options

Functionality 620Di 620DiN
Enclosure - ingress protection rating IP31 IP66
Manual control
Digital speed control with simple calibration to display flow ✔ ✔
Choice of flow rate display; metric or imperial units ✔ ✔
Numeric keypad for entry of speed, flow or PIN code ✔ ✔
Remote control
Run/stop, direction change, auto/manual mode, leak detector input (via contact closure or 5V TTL to 24V industrial logic) ✔ ✔
Remote operation of dosing (foot/handswitch or logic input) ✔ ✔
Four programmable digital status outputs through 5V TTL to 24V industrial logic ✔
Analogue speed feedback
Tachometer output; 0-1478Hz ✔ ✔
Digital communication
Digital network serial control RS232 RS485 RS232 RS485
Specialist dispensing functionality
Drip control feature (momentary direction reverse at end of dose) ✔ ✔
Ramp control to improve accuracy and avoid splashing or frothing ✔ ✔
Export of batch records to PC or printer for cGMP requirements RS232 RS232
Dual operator/supervisor PIN code protection of pump settings ✔ ✔

Literature

Brochures

  1. Dispensing pumps (EN).pdf
    PDF - 707kb

Datasheet

  1. 620Di and 620DiN with 620R pumphead datasheet (EN).pdf
    PDF - 695.3kb
  2. 620Di and 620DiN with 620REH pumphead datasheet (EN).pdf
    PDF - 682.6kb
  3. 620Di and 620DiN with 620RE pumphead datasheet (EN).pdf
    PDF - 682.6kb
  4. 620Di and 620DiN with 620LG pumphead datasheet (EN).pdf
    PDF - 636.3kb
  5. 620Di and 620DiN with 620L pumphead datasheet (EN).pdf
    PDF - 634.8kb

Manuals

  1. 620 Di-DiN manual (EN).pdf
    PDF - 4.4mb

Order Information

Product codes

620/620L product codes

Product codes
620L pumphead Accessories
Pumphead only 063.4603.000 Footswitch Handswitch RS232 cable Batch records cable
IP31/NEMA 2 wipe-down pumps IP31 IP31 IP31 IP31
620Di/L 060.4171.5L0* 059.3002.000 059.3022.000 059.3121.000 059.3125.000
* Replace last zero with A, E, U, K, R, D, Z or C for 2.8m American, European, United Kingdom, Australian, Argentinian, South African, Chinese or Swiss mains plug
IP66/NEMA 4X wash-down pumps IP55 IP65
620DiN/L 060.417N.5L0** 069.5231.000 n/a n/a n/a
** Replace last zero with A, C, K, R or Z plug type
Y element tubing Continuous tubing
Bore size (4.0mm wall thickness) 8.0mm 12.0mm 16.0mm 8.0mm 12.0mm 16.0mm
Tubing material
Pumpsil silicone 913.AE80.K40 913.A12E.K40 913.A16E.040 913.A080.040 913.A120.040 913.A160.040
Marprene 902.E080.K40 902.E120.K40 902.E160.040 902.0080.040 902.A120.040 902.0160.040
Bioprene 933.E080.K40 933.E120.K40 933.E160.040 933.0080.040 933.A120.040 933.0160.040
Clamp set for continuous tube 069.4001.000

620/620LG product codes

Product codes
620LG pumphead Accessories
Pumphead only 063.4623.000 Footswitch Handswitch RS232 cable Batch records cable
IP31/NEMA 2 wipe-down pumps IP31 IP31 IP31 IP31
620Di/LG 060.4171.5G0* 059.3002.000 059.3022.000 059.3121.000 059.3125.000
* Replace last zero with A, E, U, K, R, D, Z or C for 2.8m American, European, United Kingdom, Australian, Argentinian, South African, Chinese or Swiss mains plug
IP66/NEMA 4X wash-down pumps IP55 IP65
620DiN/LG 060.417N.5G0** 069.5231.000 n/a n/a n/a
** Replace last zero with A, C, K, R or Z plug type
Y element tubing Continuous tubing
Bore size (4.0mm wall thickness) 8.0mm 12.0mm 16.0mm 8.0mm 12.0mm 16.0mm
Tubing material
Pumpsil silicone 913.AE80.K40 913.A12E.K40 913.A16E.040 913.A080.040 913.A120.040 913.A160.040
Marprene 902.E080.K40 902.E120.K40 902.E160.040 902.0080.040 902.A120.040 902.0160.040
Bioprene 933.E080.K40 933.E120.K40 933.E160.040 933.0080.040 933.A120.040 933.0160.040
STA-PURE PCS 961.E080.K40 961.E120.K40 961.E160.040
Clamp set for continuous tube 069.4001.000
NB: 4 bar pressure capability with STA-PURE PCS elements

620/620R product codes

Pumpheads Accessories
620R MkII head Footswitch Handswitch RS232 cable Batch records cable
Pumphead only 063.4211.000
IP31/NEMA 2 wipe-down pumps IP31 IP31 IP31 IP31
620Di/R 060.4171.020* 059.3002.000 059.3022.000 059.3121.000 059.3125.000
* Replace last zero with A, E, U, K, R, D, Z or C for 2.8m American, European, United Kingdom, Australian, Argentinian, South African, Chinese or Swiss mains plug
IP66/NEMA 4X wash-down pumps IP55
620DiN/R 060.417N.020** 069.5231.000 n/a n/a —
** Replace last zero with A, C, K, R or Z plug type
Tubing
Continuous tubing
6.4mm 9.6mm 12.7mm 15.9mm
STA-PURE PCS 961.0064.032 961.0096.032 961.0127.032 961.0159.032
Bioprene TL 933.0064.032 933.0096.032 933.0127.032 933.0159.032
Marprene TL 902.0064.032 902.0096.032 902.0127.032 902.0159.032
Pumpsil silicone 913.A064.032 913.A096.032 913.A127.032 913.A159.032
NB: 4 bar pressure capability with Sta-Pure PCS

620/620RE product codes

Pumpheads Accessories
620RE MkII head Footswitch Handswitch RS232 cable Batch records cable
Pumphead only 063.4231.000
IP31/NEMA 2 wipe-down pumps IP31 IP31 IP31 IP31
620Di/RE 060.4171.E20* 059.3002.000 059.3022.000 059.3121.000 059.3125.000
* Replace last zero with A, E, U, K, R, D, Z or C for 2.8m American, European, United Kingdom, Australian, Argentinian, South African, Chinese or Swiss mains plug
IP66/NEMA 4X wash-down pumps IP55
620DiN/RE 060.417N.E20** 069.5231.000 n/a n/a —
** Replace last zero with A, C, K, R or Z plug type
Tubing
Sanitary LoadSure™ elements (3/4” Tri-clamp PVDF connectors) Industrial LoadSure™ elements (3/4” Cam & Groove PP connectors)
12mm 17mm 12mm 17mm
STA-PURE PCS 961.0120.PFT 961.0170.PFT — —
Bioprene TM 933.P120.PFT 933.P170.PFT — —
Bioprene TL 933.0120.PFT 933.0170.PFT — —
Marprene TM — — 902.P120.PPC 902.P170.PPC
Marprene TL — — 902.0120.PPC 902.0170.PPC
Pumpsil silicone 913.A120.PFT 913.A170.PFT 913.A120.PPC 913.A170.PPC
NB: 4 bar pressure capability with Sta-Pure PCS, Bioprene TM and Marprene TM

620/620REH product codes

Pumpheads Accessories
620RE4 MkII head Footswitch Handswitch RS232 cable Batch records cable
Pumphead only 063.4431.000
IP31/NEMA 2 wipe-down pumps IP31 IP31 IP31 IP31
620Di/REH 060.4171.E40* 059.3002.000 059.3022.000 059.3121.000 059.3125.000
* Replace last zero with A, E, U, K, R, D, Z or C for 2.8m American, European, United Kingdom, Australian, Argentinian, South African, Chinese or Swiss mains plug
IP66/NEMA 4X wash-down pumps IP55
620DiN/REH 060.417N.E40** 069.5231.000 n/a n/a —
** Replace last zero with A, C, K, R or Z plug type
Tubing
Sanitary LoadSure™ elements (3/4” Tri-clamp PVDF connectors) Industrial LoadSure™ elements (3/4” Cam & Groove PP connectors)
12mm 17mm 12mm 17mm
STA-PURE PCS 961.0120.PFT 961.0170.PFT — —
Bioprene TM 933.P120.PFT 933.P170.PFT — —
Bioprene TL 933.0120.PFT 933.0170.PFT — —
Marprene TM — — 902.P120.PPC 902.P170.PPC
Marprene TL — — 902.0120.PPC 902.0170.PPC
Pumpsil silicone 913.A120.PFT 913.A170.PFT 913.A120.PPC 913.A170.PPC
NB: 4 bar pressure capability with Sta-Pure PCS, Bioprene TM and Marprene TM

Recommended Products

  1. Accusil tubing

    Accusil tubing

    Tubing for accurate filling with excellent dispensing accuracy ± 0.5 %. Eight sizes available.

    Single-use assemblies

Related Products

  1. 520Di dispensing pumps

    520Di dispensing pumps

    Dispensing pump for flow rates to 3.5 L/min (55 USGPH) and pressures up to 4 bar (60 psi).

    Aseptic filling - benchtop fillers

  2. PF22

    PF22

    Tabletop aseptic filling machine for <5 ml to >5000 ml. Accuracy of ±0.5 % on most volumes prevents costly overfilling.

    Aseptic filling - benchtop fillers

  3. PF7/PF7+ table top filler

    PF7/PF7+ table top filler

    Tabletop aseptic filling machine for <0.2 ml to >250 ml. Accuracy of ±0.5 % on most volumes prevents costly overfilling.

    Aseptic filling - benchtop fillers

Our pump specialists are here to help you succeed.

To order a product or ask a question

Contact our experts