Aseptic filling - benchtop fillers

620 series dispensing pumps

620Di dispensing pumps

620Di pumps combine industrial power and durability with unrivalled precision, pumping up to 18 L/min and achieving pressures up to 4 bar. The pump can store 50 dispensing programs using the simple screen-keypad interface. The pump outputs batch records for cGMP requirements.

Accurate, fast dispensing for ultimate batch consistency. Dispenses 500 ml in 3.5 seconds with ±0.5 % accuracy.

Features and benefits

Keypad entry of flow from 0.001 L/min to 18 L/min
Dispenses 500 ml to within ±0.5 %
Stores up to 50 dispensing programs
Up to 4 bar pressure
2650:1 control ratio (0.1 to 265 rpm speed range)
Digital speed adjustment with choice of 0.1 rpm, 0.5 rpm, 1 rpm, 2 rpm, 5 rpm and 10 rpm step changes
Maintenance-free brushless DC motor
Smooth easy-to-clean enclosure free from bug traps

Technical summary

Filling volume range	Up to 500ml in 2.4s, Up to 500ml in 3.0s ml
Accuracy	±0.5 %

Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.

620Di and 620DiN with 620L pumphead performance

Flow ranges (L/min)	Y element tubing			Continuous tubing
(over 0.1 to 265rpm speed range)	(single channel)			(flow per channel - max of 2 channels)
Tubing material	8.0mm	12.0mm	16.0mm	8.0mm	12.0mm	16.0mm
Pumpsil silicone	0.002-4.6	0.003-8.5	0.005-11.5	0.001-2.3	0.002-4.3	0.003-5.8
Marprene, Bioprene	0.002-4.6	0.003-8.5	0.005-11.5	0.001-2.3	0.002-4.3	0.003-5.8
Neoprene	0.002-4.6	0.003-8.5	0.005-12.6	0.001-2.3	0.002-4.3	0.003-6.3

Dose sizes
Tube bore	8.0mm	12.0mm	16.0mm
Minimum possible dose	8ml	16ml	22ml
Minimum recommended	84ml	161ml	218ml

620Di and 620DiN with 620LG pumphead performance

Flow ranges (L/min)	Y element tubing			Continuous tubing
(over 0.1 to 265rpm speed range)	(single channel)			(flow per channel - max of 2 channels)
Tubing material	8.0mm	12.0mm	16.0mm	8.0mm	12.0mm	16.0mm
Pumpsil silicone	0.002-4.6	0.003-8.5	0.005-11.5	0.001-2.3	0.002-4.3	0.003-5.8
Marprene, Bioprene	0.002-4.6	0.003-8.5	0.005-11.5	0.001-2.3	0.002-4.3	0.003-5.8
STA-PURE PCS	0.002-5.2	0.003-9.0	0.005-12.4	0.001-2.6	0.002-4.5	0.003-6.2

620LG dose sizes (STA-PURE PCS®, STA-PURE PFL®)
Tube bore	8.0mm	12.0mm	16.0mm
Minimum possible dose	10ml	17ml	23ml
Minimum recommended	99ml	167ml	234ml

620Di and 620DiN with 620R pumphead performance

Flow ranges (L/min)	Continuous tubing
(over 0.1 to 265rpm speed range)	620R (2 rollers)
Tubing material	6.4mm	9.6mm	12.7mm	15.9mm
Marprene TL, Bioprene TL	0.001-3.4	0.003-6.6	0.004-11	0.01-12
Pumpsil silicone	0.001-3.2	0.003-7.2	0.004-11	0.01-15
STA-PURE PCS	0.001-3.2	0.003-6.6	0.004-11	0.01-16

Dose sizes
Tube bore	6.4mm (1/4”)	9.6mm (3/8”)	12.7mm (1/2”)	15.9mm (5/8”)
Minimum possible dose	6ml	14ml	21ml	28ml
Minimum recommended	60ml	136ml	208ml	283ml

620Di and 620DiN with 620RE pumphead performance

Flow ranges (L/min)	LoadSure™ element tubing
(over 0.1 to 265rpm speed range)	620RE (2 rollers)
Tubing material	12mm	17mm
Marprene TM, Bioprene TM	0.004-9.8	0.01-16
Marprene TL, Bioprene TL	0.004-9.8	0.01-18
Pumpsil silicone	0.004-10	0.01-16
STA-PURE PCS	0.004-11	0.01-18

620RE dose sizes
Tube bore	12mm	17mm
Minimum possible dose	19ml	30ml
Minimum recommended	189ml	302ml

620Di and 620DiN with 620REH pumphead performance

Flow ranges (L/min)	LoadSure™ element tubing
(over 0.1 to 265rpm speed range)	620REH (2 rollers)
Tubing material	12mm	17mm
Marprene TM, Bioprene TM	0.003-8.3	0.004-11
Marprene TL, Bioprene TL	0.003-8.3	0.005-12
Pumpsil silicone	0.003-8.7	0.004-11
STA-PURE PCS	0.003-9.0	0.010-13

620RE4 dose sizes
Tube bore	12mm	17mm
Minimum possible dose	16ml	21ml
Minimum recommended	164ml	208ml

Technical specifications

	620Di and 620DiN with 620L pumphead	620Di and 620DiN with 620LG pumphead	620Di and 620DiN with 620R pumphead	620Di and 620DiN with 620RE pumphead	620Di and 620DiN with 620REH pumphead
Filling volume range	Up to 500ml in 2.4s ml	Up to 500ml in 2.4s ml	Up to 500ml in 3.0s ml	Up to 500ml in 3.0s ml	Up to 500ml in 3.0s ml
Accuracy	±0.5 %	±0.5 %	±0.5 %	±0.5 %	±0.5 %
Ingress Protection	IP31, IP66, NEMA 2, NEMA 4X	IP31, IP66, NEMA 2, NEMA 4X	IP31, IP66, NEMA 2, NEMA 4X	IP31, IP66, NEMA 2, NEMA 4X	IP31, IP66, NEMA 2, NEMA 4X
Operating temperature range	5 °C to 40 °C	5 °C to 40 °C	5 °C to 40 °C	5 °C to 40 °C	5 °C to 40 °C
Operating temperature range	40 °F to 104 °F	40 °F to 104 °F	40 °F to 104 °F	40 °F to 104 °F	40 °F to 104 °F
Speed control ratio	2650:1	2650:1	2650:1	2650:1	2650:1
Humidity	(Condensing) 10 to 100 % RH, (Non-condensing) 80 % up to 31 °C (88 °F) decreasing linearly to 50 % at 40 °C (104 °F)	(Condensing) 10 to 100 % RH, (Non-condensing) 80 % up to 31 °C (88 °F) decreasing linearly to 50 % at 40 °C (104 °F)	(Condensing) 10 to 100 % RH, (Non-condensing) 80 % up to 31 °C (88 °F) decreasing linearly to 50 % at 40 °C (104 °F)	(Condensing) 10 to 100 % RH, (Non-condensing) 80 % up to 31 °C (88 °F) decreasing linearly to 50 % at 40 °C (104 °F)	(Condensing) 10 to 100 % RH, (Non-condensing) 80 % up to 31 °C (88 °F) decreasing linearly to 50 % at 40 °C (104 °F)
Noise	<70dB(A) at 1m	<70dB(A) at 1m	<70dB(A) at 1m	<70dB(A) at 1m	<70dB(A) at 1m
Standards	CE, cETLus	CE, cETLus	CE, cETLus	CE, cETLus	CE, cETLus
Power supply	100 V to 120 V, 200 V to 240 V, 50/60 Hz, Single-phase	100 V to 120 V, 200 V to 240 V, 50/60 Hz, Single-phase	100 V to 120 V, 200 V to 240 V, 50/60 Hz, Single-phase	100 V to 120 V, 200 V to 240 V, 50/60 Hz, Single-phase	100 V to 120 V, 200 V to 240 V, 50/60 Hz, Single-phase
Weight	24.3 - 25.2 kg	24.3 - 25.2 kg	19.6 - 20.5 kg	19.6 - 20.5 kg	20.1 - 21 kg
Weight	53.6 - 55.6 lbs	53.6 - 55.6 lbs	43.2 - 45.2 lbs	43.2 - 45.2 lbs	44.3 - 46.3 lbs
Accessories	Footswitch, handswitch, RS232 cable, batch records cable	Footswitch, handswitch, RS232 cable, batch records cable	Footswitch, handswitch, RS232 cable, batch records cable	Footswitch, handswitch, RS232 cable, batch records cable	Footswitch, handswitch, RS232 cable, batch records cable
Compatible tubing size	12.0 mm ID, 16.0 mm ID, 4.0 mm wall thickness, 8.0 mm ID	12.0 mm ID, 16.0 mm ID, 4.0 mm wall thickness, 8.0 mm ID	12.0 mm ID, 12.7 mm ID, 15.9 mm ID, 17.0 mm ID, 6.4 mm ID, 9.6 mm ID	12.0 mm ID, 12.7 mm ID, 15.9 mm ID, 17.0 mm ID, 6.4 mm ID, 9.6 mm ID	12.0 mm ID, 12.7 mm ID, 15.9 mm ID, 17.0 mm ID, 6.4 mm ID, 9.6 mm ID

620Di and 620DiN with 620L pumphead dimensions

620Di and 620DiN with 620LG pumphead dimensions

620Di and 620DiN with 620R pumphead dimensions

620Di and 620DiN with 620RE pumphead dimensions

620Di and 620DiN with 620REH pumphead dimensions

Materials of construction

Bearings	Carbon steel
Casework	Pressure die-cast aluminium LM24, Pressure die-cast aluminium LM6
Keypad/HMI	Polyester
Pumphead roller assembly	Nylatron, Stainless steel

Control options

Functionality	620Di	620DiN
Enclosure - ingress protection rating	IP31	IP66
Manual control
Digital speed control with simple calibration to display flow	✔	✔
Choice of flow rate display; metric or imperial units	✔	✔
Numeric keypad for entry of speed, flow or PIN code	✔	✔
Remote control
Run/stop, direction change, auto/manual mode, leak detector input (via contact closure or 5V TTL to 24V industrial logic)	✔	✔
Remote operation of dosing (foot/handswitch or logic input)	✔	✔
Four programmable digital status outputs through 5V TTL to 24V industrial logic		✔
Analogue speed feedback
Tachometer output; 0-1478Hz	✔	✔
Digital communication
Digital network serial control RS232 RS485	RS232	RS485
Specialist dispensing functionality
Drip control feature (momentary direction reverse at end of dose)	✔	✔
Ramp control to improve accuracy and avoid splashing or frothing	✔	✔
Export of batch records to PC or printer for cGMP requirements RS232	RS232
Dual operator/supervisor PIN code protection of pump settings	✔	✔

Brochures

Dispensing pumps (EN).pdf
PDF - 707kb

Datasheet

620Di and 620DiN with 620R pumphead datasheet (EN).pdf
PDF - 695.3kb
620Di and 620DiN with 620REH pumphead datasheet (EN).pdf
PDF - 682.6kb
620Di and 620DiN with 620L pumphead datasheet (EN).pdf
PDF - 606.5kb
620Di and 620DiN with 620RE pumphead datasheet (EN).pdf
PDF - 682.6kb
620Di and 620DiN with 620LG pumphead datasheet (EN).pdf
PDF - 636.3kb

Manuals

620 Di-DiN manual (EN).pdf
PDF - 4.4mb

Product codes

620/620L product codes

Product codes
620L pumphead		Accessories
Pumphead only	063.4603.000	Footswitch	Handswitch	RS232 cable	Batch records cable
IP31/NEMA 2 wipe-down pumps		IP31	IP31	IP31	IP31
620Di/L	060.4171.5L0*	059.3002.000	059.3022.000	059.3121.000	059.3125.000
* Replace last zero with A, E, U, K, R, D, Z or C for 2.8m American, European, United Kingdom, Australian, Argentinian, South African, Chinese or Swiss mains plug
IP66/NEMA 4X wash-down pumps		IP55			IP65
620DiN/L	060.417N.5L0**	069.5231.000	n/a	n/a	n/a
** Replace last zero with A, C, K, R or Z plug type

Bore size (4.0mm wall thickness)	8.0mm	12.0mm	16.0mm	8.0mm	12.0mm	16.0mm
	Y element tubing			Continuous tubing
Tubing material
Pumpsil silicone	913.AE80.K40	913.A12E.K40	913.A16E.040	913.A080.040	913.A120.040	913.A160.040
Marprene	902.E080.K40	902.E120.K40	902.E160.040	902.0080.040	902.A120.040	902.0160.040
Bioprene	933.E080.K40	933.E120.K40	933.E160.040	933.0080.040	933.A120.040	933.0160.040
				Clamp set for continuous tube		069.4001.000

620/620LG product codes

Product codes
620LG pumphead		Accessories
Pumphead only	063.4623.000	Footswitch	Handswitch	RS232 cable	Batch records cable
IP31/NEMA 2 wipe-down pumps		IP31	IP31	IP31	IP31
620Di/LG	060.4171.5G0*	059.3002.000	059.3022.000	059.3121.000	059.3125.000
* Replace last zero with A, E, U, K, R, D, Z or C for 2.8m American, European, United Kingdom, Australian, Argentinian, South African, Chinese or Swiss mains plug
IP66/NEMA 4X wash-down pumps		IP55			IP65
620DiN/LG	060.417N.5G0**	069.5231.000	n/a	n/a	n/a
** Replace last zero with A, C, K, R or Z plug type

Y element tubing			Continuous tubing
Bore size (4.0mm wall thickness)	8.0mm	12.0mm	16.0mm	8.0mm	12.0mm	16.0mm
Tubing material
Pumpsil silicone	913.AE80.K40	913.A12E.K40	913.A16E.040	913.A080.040	913.A120.040	913.A160.040
Marprene	902.E080.K40	902.E120.K40	902.E160.040	902.0080.040	902.A120.040	902.0160.040
Bioprene	933.E080.K40	933.E120.K40	933.E160.040	933.0080.040	933.A120.040	933.0160.040
STA-PURE PCS	961.E080.K40	961.E120.K40	961.E160.040
			Clamp set for continuous tube			069.4001.000
NB: 4 bar pressure capability with STA-PURE PCS elements

620/620R product codes

Pumpheads		Accessories
620R MkII head		Footswitch	Handswitch	RS232 cable	Batch records cable
Pumphead only	063.4211.000	Footswitch	Handswitch	RS232 cable	Batch records cable
IP31/NEMA 2 wipe-down pumps		IP31	IP31	IP31	IP31
620Di/R	060.4171.020*	059.3002.000	059.3022.000	059.3121.000	059.3125.000
* Replace last zero with A, E, U, K, R, D, Z or C for 2.8m American, European, United Kingdom, Australian, Argentinian, South African, Chinese or Swiss mains plug
IP66/NEMA 4X wash-down pumps		IP55
620DiN/R	060.417N.020**	069.5231.000	n/a	n/a	—
** Replace last zero with A, C, K, R or Z plug type

Tubing
Continuous tubing
	6.4mm	9.6mm	12.7mm	15.9mm
STA-PURE PCS	961.0064.032	961.0096.032	961.0127.032	961.0159.032
Bioprene TL	933.0064.032	933.0096.032	933.0127.032	933.0159.032
Marprene TL	902.0064.032	902.0096.032	902.0127.032	902.0159.032
Pumpsil silicone	913.A064.032	913.A096.032	913.A127.032	913.A159.032
NB: 4 bar pressure capability with Sta-Pure PCS

620/620RE product codes

Pumpheads		Accessories
620RE MkII head		Footswitch	Handswitch	RS232 cable	Batch records cable
Pumphead only	063.4231.000	Footswitch	Handswitch	RS232 cable	Batch records cable
IP31/NEMA 2 wipe-down pumps		IP31	IP31	IP31	IP31
620Di/RE	060.4171.E20*	059.3002.000	059.3022.000	059.3121.000	059.3125.000
* Replace last zero with A, E, U, K, R, D, Z or C for 2.8m American, European, United Kingdom, Australian, Argentinian, South African, Chinese or Swiss mains plug
IP66/NEMA 4X wash-down pumps		IP55
620DiN/RE	060.417N.E20**	069.5231.000	n/a	n/a	—
** Replace last zero with A, C, K, R or Z plug type

Tubing
	Sanitary LoadSure™ elements (3/4” Tri-clamp PVDF connectors)		Industrial LoadSure™ elements (3/4” Cam & Groove PP connectors)
	12mm	17mm	12mm	17mm
STA-PURE PCS	961.0120.PFT	961.0170.PFT	—	—
Bioprene TM	933.P120.PFT	933.P170.PFT	—	—
Bioprene TL	933.0120.PFT	933.0170.PFT	—	—
Marprene TM	—	—	902.P120.PPC	902.P170.PPC
Marprene TL	—	—	902.0120.PPC	902.0170.PPC
Pumpsil silicone	913.A120.PFT	913.A170.PFT	913.A120.PPC	913.A170.PPC
NB: 4 bar pressure capability with Sta-Pure PCS, Bioprene TM and Marprene TM

620/620REH product codes

Pumpheads		Accessories
620RE4 MkII head		Footswitch	Handswitch	RS232 cable	Batch records cable
Pumphead only	063.4431.000	Footswitch	Handswitch	RS232 cable	Batch records cable
IP31/NEMA 2 wipe-down pumps		IP31	IP31	IP31	IP31
620Di/REH	060.4171.E40*	059.3002.000	059.3022.000	059.3121.000	059.3125.000
* Replace last zero with A, E, U, K, R, D, Z or C for 2.8m American, European, United Kingdom, Australian, Argentinian, South African, Chinese or Swiss mains plug
IP66/NEMA 4X wash-down pumps		IP55
620DiN/REH	060.417N.E40**	069.5231.000	n/a	n/a	—
** Replace last zero with A, C, K, R or Z plug type

Tubing
	Sanitary LoadSure™ elements (3/4” Tri-clamp PVDF connectors)		Industrial LoadSure™ elements (3/4” Cam & Groove PP connectors)
	12mm	17mm	12mm	17mm
STA-PURE PCS	961.0120.PFT	961.0170.PFT	—	—
Bioprene TM	933.P120.PFT	933.P170.PFT	—	—
Bioprene TL	933.0120.PFT	933.0170.PFT	—	—
Marprene TM	—	—	902.P120.PPC	902.P170.PPC
Marprene TL	—	—	902.0120.PPC	902.0170.PPC
Pumpsil silicone	913.A120.PFT	913.A170.PFT	913.A120.PPC	913.A170.PPC
NB: 4 bar pressure capability with Sta-Pure PCS, Bioprene TM and Marprene TM