FP50
Filling and stoppering for small batch production. No costly overfilling – fill accuracy better than ±0.5 %.
Aseptic filling - fully automatic systems
Call +353 (21) 4757 030
FPC50 is a highly flexible aseptic filling system with integrated, full or partial stoppering and option of roller or crimp closure for vial capping. It provides a ready-to-use and easy-to-validate filling system for small batch production of vial sizes between 2R and 100H.
Designed for use under laminar air flow or in a restricted access barrier system, the FPC50 is available as a customised solution for integration into an isolator.
Providing fast and easy changeover between batches, the FPC50 handles up to 25 vials per minute and uses a minimum of space in a cleanroom. High filling accuracy prevents costly overfilling.
Filling is done by the integrated, highly accurate peristaltic dispenser, which can give an optimum filling accuracy for volumes from micro-volumes. This feature prevents costly overfilling of expensive liquids. As an option, the unit can do automatic gas purging before, during and after the liquid filling process.
A complete change-over between different liquids, vials or stoppers can be done by the operator within five minutes, without any technical support from outside the cleanroom.
FPC50 can be customised to fit different sizes of trays at the infeed and at the outfeed. The infeed tray can be positioned on the front of the FPC50 or on the left side of the unit.
Filling volume range | 0.1-100 ml |
Accuracy | up to ±0.5 % |
Capacity | 1500 units/hour |
Stoppers | ISO standard or Lyo, 13 mm and 20 mm |
Infeed and outfeed trays | Width/open end min. 200mm/7.9"-max. 305mm/12" |
Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.
FPC50 | |
Filling volume range | 0.1-100 ml |
Accuracy | up to ±0.5 % |
Capacity | 1500 units/hour |
Power supply | 110/230 V AC, 220 V to 240 V AC, 50/60 Hz |
Power consumption | Max 1200 W |
Air supply/pneumatic connection | 6 bar (87 psi) to ISO 8573-1 2010 [1:4:2] |
Air consumption | Max 100 L/min |
Interface | 1 x 24 V output signal for gas purge valve; 2 x external interface for e.g. particle counter; Integration with RABS |
Weight | 400 kg |
Vial Size | ISO 8362 2R - 100H |
Stoppers | ISO standard or Lyo, 13 mm and 20 mm |
Infeed and outfeed trays | Width/open end min. 200mm/7.9"-max. 305mm/12" |
Material | Anodised aluminium, POM, Stainless steel, Stainless steel AISI 316L, Teflon |
Filling and stoppering for small batch production. No costly overfilling – fill accuracy better than ±0.5 %.
Aseptic filling - fully automatic systems
Uniquely configurable fill/finish system. Innovative design with a wide variety of options to suit all requirements.
Aseptic filling - fully automatic systems
Tubing for accurate filling with excellent dispensing accuracy ± 0.5 %. Eight sizes available.
Single-use assemblies
WMArchitectTM fill/finish single-use assemblies safeguard your therapeutic during the filling process with a wide range of sterility-assured assembly configurations.
Single-use assemblies
Fully-automatic systems for production. Highly accurate filling of volumes from less than 0.2 ml to more than 250 ml.
Aseptic filling - fully automatic systems
Filling and stoppering for small batch production. No costly overfilling – fill accuracy better than ±0.5 %.
Aseptic filling - fully automatic systems
Uniquely configurable fill/finish system. Innovative design with a wide variety of options to suit all requirements.
Aseptic filling - fully automatic systems
To order a product or ask a question