Fluid path - transfer hose and tubing

Silicone transfer tubing

Order a sample

Overview

Silicone transfer tubing

BioPure silicone transfer tubing provides a value-based solution in critical bioprocess fluid transfer applications. Complete with a validation pack, including extractables profile, BioPure silicone transfer tubing is simple to integrate throughout your bioprocess. Laser etched tubing with lot number available upon request.

This flexible silicone tubing is manufactured in an ISO 14644-1 Class 7 cleanroom and suitable for a broad range of bioprocess applications.

Features and benefits

Safe, reliable and value-based general purpose fluid transfer solution
Manufactured and packed in an ISO 14644-1 Class 7 cleanroom
Comprehensive stock of a wide range of sizes
Validation pack, including extractable profiles and USP <85> Bacterial Endotoxin testing
Autoclavable to 121 ºC and gamma stable up to 50 kGY

Technical summary

Certification and compliance	ADCF, ISO 10993, ISO Class 7, Ph. Eur. 3.1.9, TOC, USP Class VI
Shelf life	5 years
Gamma stability	25 kGy to 50 kGy
Autoclave stability	121 °C 30 minutes

Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.

Specifications

Technical specifications

	Silicone transfer tubing
Bore size	3.2 - 25.4 mm
Bore size	0.125 - 1 in
External diameter	6.4 - 38.1 mm
External diameter	0.25 - 1.5 in
Length	7.6 - 30 m
Length	25 - 100 Ft
Transparency	Translucent
Certification and compliance	ADCF, ISO 10993, ISO Class 7, Ph. Eur. 3.1.9, TOC, USP Class VI
Operating temperature range	-65 °C to 254 °C
Operating temperature range	-85 °F to 490 °F
Hardness, shore A (5sec)	50
Specific gravity	1.14 g/cm³
UV resistance	High
Burst pressure	1.9 - 8.3 bar
Burst pressure	27 - 120 psi
Ultimate tensile strength	8.3 MPa
Ultimate tensile strength	1200 psi
Max. operating pressure	2.8 bar
Max. operating pressure	40 psi
Elongation at break	400 %
Shelf life	5 years
Gamma stability	25 kGy to 50 kGy
Autoclave stability	121 °C 30 minutes

ASTM methods Hardness: ASTM D 2240; Specific gravity: ASTM D 792; Tear B, Ultimate tensile strength,; Elongation at break, Tensile stress at 100% elongation; ASTM D 412 Max operating pressure is dependent on tube size

Materials of construction

Material

Platinum-cured silicone

Validation

About the Silicone transfer tubing validation guides

A validation pack is available for Silicone transfer tubing

Download summary guide

Silicone transfer tubing validation summary guide

Validation summary guide PDF - 334.9kb

Request full validation guide

First name*

Last name*

Email address*

Company*

Message

Disclaimer: You hereby agree the provided validation guide is for private use only to assist in the qualification of the products listed within the validation guide.

You also agree that you will not copy, redistribute, transmit, assign, sell, broadcast, rent, share, lend, modify, adapt, edit or transfer the validation guide to any other party without prior consent from WMFTS.

Disclaimer: You hereby agree the provided validation guide is for private use only to assist in the qualification of the products listed within the validation guide.

Yes

Literature

Brochures

BioPure overview (EN).pdf
PDF - 863.8kb

Datasheet

Silicone Transfer Tubing datasheet (EN).pdf
PDF - 148.5kb

Order Information

Product codes

Silicone transfer tubing product codes

I.D.	O.D.	Coil size
mm (inch)	mm (inch)	30 m (100 ft)	15 m (50 ft)	7.6 m (25 ft)
3.2 (0.125)	6.4 (0.250)	BPS-0125-0250-100	BPS-0125-0250-50	—
3.2 (0.125)	8.0 (0.312)	BPS-0125-0312-100	BPS-0125-0312-50	—
3.2 (0.125)	9.6 (0.375)	BPS-0125-0375-100	BPS-0125-0375-50	—
4.8 (0.187)	8.0 (0.312)	BPS-0187-0312-100	BPS-0187-0312-50	—
4.8 (0.187)	9.6 (0.375)	BPS-0187-0375-100	BPS-0187-0375-50	—
4.8 (0.187)	11.2 (0.437)	BPS-0187-0437-100	BPS-0187-0437-50	—
6.4 (0.250)	9.6 (0.375)	BPS-0250-0375-100	BPS-0250-0375-50	—
6.4 (0.250)	11.2 (0.437)	BPS-0250-0437-100	BPS-0250-0437-50	—
6.4 (0.250)	12.7 (0.500)	BPS-0250-0500-100	BPS-0250-0500-50	—
8.0 (0.312)	11.2 (0.437)	BPS-0312-0437-100	BPS-0312-0437-50	—
8.0 (0.312)	12.7 (0.500)	BPS-0312-0500-100	BPS-0312-0500-50	—
8.0 (0.312)	14.3 (0.562)	BPS-0312-0562-100	BPS-0312-0562-50	—
9.6 (0.375)	12.7 (0.500)	BPS-0375-0500-100	BPS-0375-0500-50	—
9.6 (0.375)	14.3 (0.562)	BPS-0375-0562-100	BPS-0375-0562-50	—
9.6 (0.375)	15.9 (0.625)	BPS-0375-0625-100	BPS-0375-0625-50	—
12.7 (0.500)	15.9 (0.625)	—	BPS-0500-0625-50	BPS-0500-0625-25
12.7 (0.500)	17.5 (0.687)	—	BPS-0500-0687-50	BPS-0500-0687-25
12.7 (0.500)	19.0 (0.750)	—	BPS-0500-0750-50	BPS-0500-0750-25
15.9 (0.625)	22.2 (0.875)	—	BPS-0625-0875-50	BPS-0625-0875-25
15.9 (0.625)	25.4 (1.000)	—	BPS-0625-1000-50	BPS-0625-1000-25
19.0 (0.750)	25.4 (1.000)	—	BPS-0750-1000-50	BPS-0750-1000-25
19.0 (0.750)	28.6 (1.125)	—	BPS-0750-1125-50	BPS-0750-1125-25
25.4 (1.000)	31.2 (1.250)	—	BPS-1000-1250-50	BPS-1000-1250-25
25.4 (1.000)	34.9 (1.375)	—	BPS-1000-1375-50	BPS-1000-1375-25
25.4 (1.000)	38.1 (1.500)	—	BPS-1000-1500-50	BPS-1000-1500-25