Bioflex Ultra
Smooth bore hose for biopharm and fine chemicals for clean, fast flow of high purity fluids.
Flexible hose assemblies
Call +62 21 8379 7233
PTFE-lined hose for chemical and process fluid transfer
A fluoroplastic hose with a flexible convoluted PTFE liner. Corroflon has shallow convolutions which minimise the restriction in flow rates, with external wire reinforcement to ensure full vacuum and kink resistance in process applications.
Nominal bore size | 15 - 150 mm |
Nominal bore size | 0.5 - 6 in |
Outside diameter | 16.1 - 154 mm |
Outside diameter | 0.63 - 6.06 in |
Max. operating pressure | 41 bar |
Max. operating pressure | 595 psi |
Certification and compliance | 3.1 Traceability, ATEX, EN16643:2016, EU Regulation 10/2011, FDA (materials), Fireproof to BS5173 section 103.13 part 6.2, ISO 14001:2015, ISO 9001:2015, OHSAS 18001:2015 |
Bend radius | 38 - 900 mm |
Bend radius | 1.5 - 35.5 in |
Braid type | None |
Cover | EPDM rubber, None, Silicone rubber |
Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.
Nominal hose bore size | Bore inside convolutions | Corroflon grade (braid & cover) |
Maximum working pressure of hose | Burst pressure | Minimum bend radius | |||||
---|---|---|---|---|---|---|---|---|---|---|
in | mm | in | mm | bar | psi | bar | psi | in | mm | |
1/2 | 15 | 0.440 | 11.2 | TO | 6 | 87 | 24 | 350 | 11/2 | 38 |
SS | 41 | 595 | 450 | 6,525 | 11/2 | 38 | ||||
PB | 31 | 450 | 150 | 2,175 | 11/2 | 38 | ||||
SS, RC/FP | 41 | 595 | 450 | 6,525 | 21/4 | 57 | ||||
RC, SI | 41 | 595 | 450 | 6,525 | 21/4 | 57 | ||||
KYB | 15 | 215 | 61.5 | 890 | 11/2 | 38 | ||||
3/4 | 20 | 0.620 | 15.7 | TO | 5 | 70 | 20 | 290 | 2 | 51 |
SS | 35 | 505 | 240 | 3,480 | 2 | 51 | ||||
PB | 26 | 375 | 105 | 1,520 | 2 | 51 | ||||
SS, RC/FP | 35 | 505 | 240 | 3,480 | 3 | 76 | ||||
RC, SI | 35 | 505 | 240 | 3,480 | 3 | 76 | ||||
KYB | 13 | 190 | 52.5 | 760 | 2 | 51 | ||||
1 | 25 | 0.847 | 21.5 | TO | 4.5 | 65 | 18 | 260 | 23/4 | 70 |
SS | 31 | 450 | 200 | 2,900 | 23/4 | 70 | ||||
PB | 23 | 334 | 93 | 1,350 | 23/4 | 70 | ||||
SS, RC/FP | 31 | 450 | 200 | 2,900 | 41/4 | 105 | ||||
RC, SI | 31 | 450 | 200 | 2,900 | 41/4 | 105 | ||||
KYB | 11 | 160 | 46.5 | 675 | 23/4 | 70 | ||||
11/4 | 32 | 1.080 | 27.5 | TO | 4 | 58 | 16 | 230 | 31/4 | 82 |
SS | 27 | 390 | 180 | 2,610 | 31/4 | 82 | ||||
PB | 20 | 290 | 81 | 1,175 | 31/4 | 82 | ||||
SS, RC/FP | 27 | 390 | 180 | 2,610 | 43/4 | 123 | ||||
RC, SI | 27 | 390 | 180 | 2,610 | 43/4 | 123 | ||||
KYB | 10 | 145 | 40.5 | 585 | 31/4 | 82 | ||||
11/2 | 40 | 1.250 | 32.0 | TO | 3.5 | 50 | 14 | 205 | 4 | 100 |
SS | 23 | 335 | 120 | 1,740 | 4 | 100 | ||||
PB | 17 | 245 | 69 | 1,000 | 4 | 100 | ||||
SS, RC/FP | 23 | 335 | 120 | 1,740 | 6 | 150 | ||||
RC, SI | 23 | 335 | 120 | 1,740 | 6 | 150 | ||||
KYB | 9 | 130 | 34.5 | 500 | 4 | 100 | ||||
2 | 50 | 1.690 | 43.0 | TO | 3 | 44 | 12 | 175 | 51/2 | 140 |
SS | 20 | 290 | 100 | 1,450 | 51/2 | 140 | ||||
PB | 15 | 215 | 60 | 870 | 51/2 | 140 | ||||
SS, RC/FP | 20 | 290 | 100 | 1,450 | 81/4 | 210 | ||||
RC, SI | 20 | 290 | 100 | 1,450 | 81/4 | 210 | ||||
KYB | 8 | 115 | 30 | 435 | 51/2 | 140 | ||||
21/2 | 65 | 2.120 | 54.0 | TO | 2.5 | 36 | 10 | 145 | 7 | 178 |
SS | 16 | 230 | 70 | 1,015 | 7 | 178 | ||||
PB | 12 | 175 | 48 | 695 | 7 | 178 | ||||
SS, RC/FP | 16 | 230 | 70 | 1,015 | 101/2 | 267 | ||||
RC, SI | 16 | 230 | 70 | 1,015 | 101/2 | 267 | ||||
KYB | 6 | 87 | 24 | 350 | 7 | 178 | ||||
3 | 80 | 2.500 | 64.0 | TO | 2 | 29 | 8 | 115 | 9 | 230 |
SS | 14 | 205 | 60 | 870 | 9 | 230 | ||||
PB | 10 | 145 | 42 | 610 | 9 | 230 | ||||
SS, RC/FP | 14 | 205 | 60 | 870 | 131/2 | 345 | ||||
RC, SI | 14 | 205 | 60 | 870 | 131/2 | 345 | ||||
KYB | 5 | 73 | 21 | 305 | 9 | 230 | ||||
4 | 100 | 3.860 | 98.0 | TO | 1.5 | 22 | 6 | 87 | 113/4 | 300 |
SS | 10 | 145 | 40 | 580 | 113/4 | 300 | ||||
PB | 8 | 115 | 30 | 435 | 113/4 | 300 | ||||
SS, RC/FP | 10 | 145 | 40 | 580 | 173/4 | 450 | ||||
RC, SI | 10 | 145 | 40 | 580 | 173/4 | 450 | ||||
KYB | - | - | - | - | - | - | ||||
6 | 150 | 5.250 | 130.0 | TO | 0.75 | 11 | 3 | 44 | 233/4 | 600 |
SS | 5 | 73 | 20 | 290 | 233/4 | 600 | ||||
PB | - | - | - | - | - | - | ||||
SS, RC/FP | 5 | 73 | 20 | 290 | 351/2 | 900 | ||||
RC, SI | 5 | 73 | 20 | 290 | 351/2 | 900 | ||||
KYB | - | - | - | - | - | - | ||||
TO = Tube only, SS = Stainless steel braid, PB = Polypropylene braid, SS,RC/FP = Fireproof rubber cover, RC = EPDM rubber cover, SI = Silicone rubber cover, KYB = Kynar braid |
EPDM rubber covered (RC/BK/FP) grade hoses | Hastelloy braid (HB) grade hoses | Kynar braid (KYB) grade hoses | Polypropylene braid (PB) grade hoses | Polypropylene Double Braid (PB) Grade Hoses | Silicone rubber covered (SI) grade hoses | Stainless steel braid (SS) grade hoses | Tube only (TO) grade hoses | |
---|---|---|---|---|---|---|---|---|
Nominal bore size | 15 - 150 mm | 15 - 50 mm | 15 - 80 mm | 15 - 100 mm | 15 - 150 mm | 15 - 150 mm | 15 - 150 mm | |
Nominal bore size | 0.5 - 6 in | 0.5 - 2 in | 0.5 - 3 in | 0.5 - 4 in | 0.5 - 6 in | 0.5 - 6 in | 0.5 - 6 in | |
Actual bore size | 11.2 - 130 mm | 11.2 - 43 mm | 11.2 - 64 mm | 11.2 - 98 mm | 11.2 - 130 mm | 11.2 - 130 mm | 11.2 - 130 mm | |
Actual bore size | 0.44 - 5.25 in | 0.44 - 1.69 in | 0.44 - 2.5 in | 0.44 - 3.86 in | 0.44 - 5.25 in | 0.44 - 5.25 in | 0.44 - 5.25 in | |
Length | 5 - 30 m | 30 m | 20 - 30 m | 10 - 30 m | 5 - 30 m | 5 - 30 m | 5 - 30 m | |
Length | 16 - 100 Ft | 100 Ft | 65 - 100 Ft | 32 - 100 Ft | 16 - 100 Ft | 16 - 100 Ft | 16 - 100 Ft | |
Outside diameter | 22.8 - 154 mm | 17.8 - 55.6 mm | 19.3 - 86.2 mm | 20.4 - 112.8 mm | 22.8 - 154 mm | 17.8 - 149 mm | 16.1 - 146 mm | |
Outside diameter | 0.9 - 6.06 in | 0.7 - 2.19 in | 0.76 - 3.39 in | 0.8 - 4.44 in | 0.9 - 6.06 in | 0.7 - 5.87 in | 0.63 - 5.75 in | |
Max. operating pressure | 41 bar | 32.8 bar | 15 bar | 31 bar | 41 bar | 41 bar | 6 bar | |
Max. operating pressure | 595 psi | 476 psi | 215 psi | 450 psi | 595 psi | 595 psi | 87 psi | |
Burst pressure | 20 - 450 bar | 80 - 360 bar | 21 - 61.5 bar | 30 - 150 bar | 20 - 450 bar | 20 - 450 bar | 3 - 24 bar | |
Burst pressure | 290 - 6,525 psi | 1160 - 5,220 psi | 305 - 890 psi | 435 - 2,175 psi | 290 - 6,525 psi | 290 - 6,525 psi | 44 - 350 psi | |
Certification and compliance | 3.1 Traceability, ATEX, EN16643:2016, EU Regulation 10/2011, FDA (materials), Fireproof to BS5173 section 103.13 part 6.2, ISO 14001:2015, ISO 9001:2015, OHSAS 18001:2015 | 3.1 Traceability, ATEX, EN16643:2016, EU Regulation 10/2011, FDA (materials), ISO 14001:2015, ISO 9001:2015, OHSAS 18001:2015 | 3.1 Traceability, ATEX, EN16643:2016, EU Regulation 10/2011, FDA (materials), ISO 14001:2015, ISO 9001:2015, OHSAS 18001:2015 | 3.1 Traceability, ATEX, EN16643:2016, EU Regulation 10/2011, FDA (materials), ISO 14001:2015, ISO 9001:2015, OHSAS 18001:2015 | 3.1 Traceability, ATEX, EN16643:2016, EU Regulation 10/2011, FDA (materials), ISO 14001:2015, ISO 9001:2015, OHSAS 18001:2015 | 3.1 Traceability, ATEX, EN16643:2016, EU Regulation 10/2011, FDA (materials), ISO 14001:2015, ISO 9001:2015, OHSAS 18001:2015 | 3.1 Traceability, ATEX, EN16643:2016, EU Regulation 10/2011, FDA (materials), ISO 14001:2015, ISO 9001:2015, OHSAS 18001:2015 | |
Operating temperature range | -40 °C to 100 °C | -73 °C to 260 °C | -40 °C to 120 °C | -30 °C to 100 °C | -73 °C to 224 °C | -73 °C to 260 °C | ||
Operating temperature range | -40 °F to 302 °F | -99 °F to 500 °F | -40 °F to 248 °F | -22 °F to 212 °F | -99 °F to 435 °F | -99 °F to 500 °F | ||
Bend radius | 57 - 900 mm | 38 - 140 mm | 38 - 230 mm | 38 - 300 mm | 57 - 900 mm | 38 - 600 mm | 38 - 600 mm | |
Bend radius | 2.25 - 35.5 in | 1.5 - 5.25 in | 1.5 - 9 in | 1.5 - 11.75 in | 2.25 - 35.5 in | 1.5 - 23.75 in | 1.5 - 23.75 in | |
Braid type | None | |||||||
Cover | EPDM rubber | None | None | None | Silicone rubber | None | None | |
Hose external protection options | Protection coil, Safegard, Scuff rings | Protection coil, Safegard, Scuff rings | Protection coil, Safegard, Scuff rings | Protection coil, Safegard, Scuff rings | Protection coil, Safegard, Scuff rings | Protection coil, Safegard, Scuff rings | Protection coil, Safegard, Scuff rings | |
End fitting | 90° elbow fittings, BSP and NPT threaded fittings, CAM and groove fittings, DIN 11851 fittings, JIC fittings, PTFE dip pipe fittings, Sanitary triclamp fittings, SMS and RJT fittings, Swivel flange fittings | 90° elbow fittings, BSP and NPT threaded fittings, CAM and groove fittings, DIN 11851 fittings, JIC fittings, PTFE dip pipe fittings, Sanitary triclamp fittings, SMS and RJT fittings, Swivel flange fittings | 90° elbow fittings, BSP and NPT threaded fittings, CAM and groove fittings, DIN 11851 fittings, JIC fittings, PTFE dip pipe fittings, Sanitary triclamp fittings, SMS and RJT fittings, Swivel flange fittings | 90° elbow fittings, BSP and NPT threaded fittings, CAM and groove fittings, DIN 11851 fittings, JIC fittings, PTFE dip pipe fittings, Sanitary triclamp fittings, SMS and RJT fittings, Swivel flange fittings | 90° elbow fittings, BSP and NPT threaded fittings, CAM and groove fittings, DIN 11851 fittings, JIC fittings, PTFE dip pipe fittings, Sanitary triclamp fittings, SMS and RJT fittings, Swivel flange fittings | 90° elbow fittings, BSP and NPT threaded fittings, CAM and groove fittings, DIN 11851 fittings, JIC fittings, PTFE dip pipe fittings, Sanitary triclamp fittings, SMS and RJT fittings, Swivel flange fittings | 90° elbow fittings, BSP and NPT threaded fittings, CAM and groove fittings, DIN 11851 fittings, JIC fittings, PTFE dip pipe fittings, Sanitary triclamp fittings, SMS and RJT fittings, Swivel flange fittings | |
Labelling options | Colour coding, Standard | Colour coding, Standard | Colour coding, Standard | Colour coding, Standard | Colour coding, Standard, Streamline tagging | Colour coding, Standard | Colour coding, Standard | |
Vacuum resistance | Vacuum resistant to -0.9 bar up to 150 °C (302 °F) | Vacuum resistant to -0.9 bar up to 150 °C (302 °F) | Vacuum resistant to -0.9 bar up to 150 °C (302 °F) | Vacuum resistant to -0.9 bar up to 150 °C (302 °F) | Vacuum resistant to -0.9 bar up to 150 °C (302 °F) | Vacuum resistant to -0.9 bar up to 150 °C (302 °F) | Vacuum resistant to -0.9 bar up to 150 °C (302 °F) |
Helical wire | Stainless steel |
Liner tube | Anti-static PTFE, Natural PTFE |
Braid | Hastelloy, Kynar®, Polypropylene, Stainless steel |
Wire braid | Hastelloy, Kynar, Polypropylene, Stainless steel |
Fitting liner | PTFE |
For use in applications where the temperature of the process fluid entering the hose assembly must be regulated as it passes through the hose. This is usually required to prevent solidification or an increase in the fluid viscosity. Electrical heating is often preferred to steam heating because it is more convenient, more controllable and usually more readily available. ‘Zone 1 hazardous area’ requirements can be met.
The heating element comprises a self-regulating element spirally wrapped around the hose assembly. Self-regulating elements may require a sensor and controller if a specific maintain temperature is required. Please consult Aflex Hose for clarification. The power leads and (if applicable) temperature sensor leads emerge from the hose assembly at one end, through glands and conduits. The thermal insulation is foam rubber, closed-cell fire resistant silicone foam rubber for temperatures above 80˚C. The outer cover may be a polypropylene braid or SS wire braid with a EPDM rubber cover.
Each hose is custom designed and built to suit the requirements of the particular application. Application details must be supplied by filling in an “ETH Hose Questionnaire”, available from Aflex Hose. Generally, for hazardous areas, the self-regulating type of heating element is employed, with or without a temperature sensor and control, and flameproof glands and conduit are also required. The watts per metre of the heating element, the pitch of the spiral on the hose, and the thickness of the thermal insulation are all calculated in accordance with established formulae to give the required maintained temperature for the process fluid passing through.
As for Corroflon GP, SS in Specifications and Properties, except that the minimum bend radius is tripled and the outside diameter and weight are significantly increased in line with the particular design. The maximum length of a CH/ETH hose is 10m (33ft).
1” PTFE lined PN10 flange spigots on heated hoses can only have a maximum flare diameter of 50mm, not 63mm. If the hose is “hanging”, straight or at 90˚, under its own weight, special construction is required, so advise Aflex Hose accordingly. Minimum ETH Hose assembly length, when collars are used 1mtr.
Hose | |||||||||
---|---|---|---|---|---|---|---|---|---|
Bioflex Ultra | Pharmaline N | Pharmaline X | FaBLINE | Corroflon | Corroline+ | Smoothbore | Hyperline FX | Visiflon | |
Tube only -TO | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
Stainless Steel - SS | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
Rubber Covered - RC | ✔ | ✔ | ✔ | ✔ | |||||
Polypropylene Braid - PB | ✔ | ✔ | |||||||
Platinum Cured - SI | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
Braids | |||||||||
Bioflex Ultra | Pharmaline N | Pharmaline X | FaBLINE | Corroflon | Corroline+ | Smoothbore | Hyperline FX | Visiflon | |
Plastic Rubber option | ✔ | ✔ | ✔ | ||||||
Aramid | ✔ | ||||||||
Kynar Braid | ✔ | ||||||||
Hastelloy Braid | ✔ | ||||||||
Blue EPDM | ✔ | ✔ | ✔ | ||||||
Black EPDM | ✔ | ✔ | ✔ | ||||||
External protections | |||||||||
Bioflex Ultra | Pharmaline N | Pharmaline X | FaBLINE | Corroflon | Corroline+ | Smoothbore | Hyperline FX | Visiflon | |
Safeguard Protection Sleeve - SG | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
Scuff Ring - SR | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
Protection Coil - PC | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
Double Rubber Cover End Protection - RC300 | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
Double Rubber Cover End Protection - DBK300 | ✔ | ✔ | ✔ | ✔ | ✔ |
Bioflex Ultra | Pharmaline N | Pharmaline X | FaBLINE | Corroflon | Corroline+ | Smoothbore | Hyperline FX | Visiflon | |
---|---|---|---|---|---|---|---|---|---|
Swivel Flange Fittings - Non-Lined | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
Swivel Flange Fittings - Lined | ✔ | ✔ | ✔ | ✔ | |||||
Cam & Groove Fittings Male Non-Lined | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
Cam & Groove Fittings Male Lined | ✔ | ✔ | ✔ | ✔ | |||||
Cam & Groove Fittings Female Non-lined | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
Cam & Groove Fittings Female Lined | ✔ | ✔ | ✔ | ✔ | |||||
Sanitary Triclamp Fittings PTFE Lined and Flared | ✔ | ✔ | ✔ | ||||||
Sanitary Triclamp Fittings - Non-Lined | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
Sanitary & Mini Sanitary | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
Sanitary Triclamp Fittings - 90° Elbow Fitting | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
DIN 11851 / SMS Fittings - PTFE Lined | ✔ | ✔ | ✔ | ||||||
DIN 11851 Fittings - Non-Lined | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
RJT Female Fittings - Non-lined | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
BSP & NPT Threaded Fittings - NPT & BSPT Fittings | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
BSP & NPT Threaded Fitting - BSP 60° Cone seat female fittings | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
JIC Fittings | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
PTFE Dip Pipe Fittings | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
3-A Sanitary Fittings | ✔ | ✔ | ✔ | ✔ | |||||
90° Elbow Fitting | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
Grooved Standpipe Fittings | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
IDF Female / Male - Non-lined | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
ENCAP Fittings | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
PTFE Tail or Hydraulic Fittings | ✔ | ✔ | ✔ | ||||||
PTFE Tail Fittings | ✔ | ✔ | ✔ | ✔ |
Specify all requirements in order shown below:
Example | |
---|---|
Written description | 4 off x 1" bore Corroflon, AS, SS, RC, DRC-300 hose x 3.00 metres long (10ft). Both ends non-lined ANSI 150# S/S Flanges |
Part numbers | Corroflon AS, SS, RC, DRC-300 |
Special requirements:
Specify full written description on enquiry or purchase order:
PTFE liner | Braids | Rubber covers |
---|---|---|
Natural (GP) | 316 stainless steel (SS) | Platinum cured silicone (SI) |
Antistatic (AS) | Polypropylene (PB) | Blue EPDM rubber cover (RC) |
Hastelloy (HB) | Black EPDM rubber cover (BK) | |
Kynar (KYB) |
External protections available – see braid, covers and end fittings page.
LISTED MINIMUM LENGTHS DO NOT INCLUDE FITTINGS.
Hose length + end fittings = Total hose assembly length (sealing face to sealing face)
Lengths made to customer requirement.
Tolerance +5 %/-0 %.
Nominal Size of Hose | Minimum Hose Length Between Fittings | Maximum Hose Assembly Length Longer lengths may be available by special order |
||
---|---|---|---|---|
Used Straight | Flexed Through 90° | |||
All Grades | TO, KYB Grades | SS, PB RC Grades | ||
inches (mm) | inches (mm) | inches (mm) | inches (mm) | Metres (ft) |
1/2 (15) | 3 (75) | 3.00 (75) | 3.00 (75) | 100 (30) |
3/4 (20) | 3 (75) | 4.72 (120) | 4.00 (100) | 100 (30) |
1 (25) | 3 (75) | 6.89 (175) | 4.33 (110) | 100 (30) |
11/4 (32) | 4 (100) | 8.66 (220) | 6.30 (160) | 100 (30) |
11/2 (40) | 4 (100) | 11.22 (285) | 8.66 (220) | 100 (30) |
2 (50) | 4 (100) | 18.70 (475) | 12.40 (315) | 100 (30) |
21/2 (65) | 4 (100) | 27.95 (710) | 18.70 (475) | 60 (18) |
3 (80) | 4 (100) | 32.48 (825) | 21.65 (550) | 50 (15) |
4 (100) | 12 (300) | 18.58 (472) | 27.83 (707) | 32 |
6 (150) | 12 (300) | 37.13 (943) | 55.67 (1414) | 16 |
Large range of ‘standard’ end fittings available.
Special order—non-standard grades of SS or materials such as Hastelloy or Monel.
Specification Equivalents | |||
---|---|---|---|
Grade | BS British Standard |
AISI American Standard or C = Casting Grade |
EN European Norm |
316L SS | BS 316 S11 | AISI 316 L | EN1.4404 |
316C SS | BS 316 C16 | CF8M | EN 1.4408 |
304 SS | BS 304 S15 | AISI 30 | EN 1.4301 |
Smooth bore hose for biopharm and fine chemicals for clean, fast flow of high purity fluids.
Flexible hose assemblies
Smooth bore hose for chemical and other fluid flow applications where rough usage may occur.
Flexible hose assemblies
Smooth bore hose for all applications where improved flexibility and kink resistance are required.
Flexible hose assemblies
Smooth bore hose for replacing silicone rubber hoses for improved compatibility and cleanability.
Flexible hose assemblies
Smooth bore hose for most automotive and general purpose applications. Usable at high pressures.
Flexible hose assemblies
Convoluted bore hose for all applications where a smooth bore and/or high pressures are not required.
Flexible hose assemblies
To order a product or ask a question