EPDM diaphragms
EPDM diaphragms. Not suitable for use with solvents or petroleum agents.
Valves - diaphragms
Call +61 2 8787 1400
ASEPCO sampling valves are specifically designed for applications where leakage, dead legs, and cross-contamination are unacceptable. Mounted on the wall of the vessel just above the knuckle, they are equipped with the unique ASEPCO port that allows through-the-chamber CIP/SIP flow between sampling to ensure a truely representative sample every time.
Mounting type | Clamp-on Ingold connection, Threaded Ingold connection |
Inlet/outlet Connections | 0.25" hygienic clamp, 0.25" tube end, 0.5" hygienic clamp, 0.5" tube end |
Max. operating pressure | 10 bar |
Max. operating pressure | 150 psi |
Compatible actuators | Manual |
Compatible diaphragms | EPDM, Silicone, Silicone plus |
Surface finish options | Electropolished, Max 10 micro-inch Ra (0.25 µm Ra), Max 15 micro-inch Ra (0.375 µm Ra), Max 20 micro-inch Ra (0.5 µm Ra) |
Certification and compliance | ISO 9001 |
Standards | ASME BPE |
Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.
Size | Cv at 1 psi (0.07 bar) | |
---|---|---|
inches | LPM | GPM |
0.25 Fitting connections | 4.66 | 1.23 |
0.50 Fitting connections | 10.2 | 2.6 |
I-Sample valves | |
---|---|
Mounting type | Clamp-on Ingold connection, Threaded Ingold connection |
Flow rate | 4.66 - 10.2 l/m |
Flow rate | 1.23 - 2.6 USGPM |
Sizes | 0.5" |
Inlet/outlet Connections | 0.25" hygienic clamp, 0.25" tube end, 0.5" hygienic clamp, 0.5" tube end |
Max. operating pressure | 10 bar |
Max. operating pressure | 150 psi |
Operating temperature range | -51 °C to 135 °C |
Operating temperature range | -60 °F to 275 °F |
Compatible actuators | Manual |
Compatible diaphragms | EPDM, Silicone, Silicone plus |
Surface finish options | Electropolished, Max 10 micro-inch Ra (0.25 µm Ra), Max 15 micro-inch Ra (0.375 µm Ra), Max 20 micro-inch Ra (0.5 µm Ra) |
Certification and compliance | ISO 9001 |
Standards | ASME BPE |
Weight | 0.55 kg |
Weight | 1.21 lbs |
Size | A | B | C | D | B + C (with Actuator) | |||||
---|---|---|---|---|---|---|---|---|---|---|
inches | mm | in | mm | in | mm | in | mm | in | mm | in |
0.50 Clamp and Weld-in | 74.2 | 2.92 | 61.5 | 2.42 | 99.8 | 3.93 | 5.3 | 0.21 | 161.3 | 6.35 |
Size | Valve Body | Total Weight with Manual Actuator | ||
---|---|---|---|---|
inches | kg | lb | kg | lb |
0.50 Clamp and Weld-in | 0.55 | 1.21 | 0.88 | 1.95 |
Material | Hastelloy C22, Hastelloy C276, Stainless steel 316L, Stainless steel AL-6XN |
Using the 4-valve rig from ASEPCO is the easiest and most reliable way to take a truly representative sample in an uncontrolled environment.
Step-by-step:
Following these steps offers consistent, repeatable and reliable sampling at any time during the process. Using the behind-the-seat flowpath design of ASEPCO valves ensures the absolute aseptic control of your sample.
The AKS actuator series** for tank valves is a durable, easy to maintain actuator made of a plastic housing and stainless steel diaphragm interface. The resulting actuator is a hygienic design which is GMP-compliant.
Our tank valve actuators are also available in the AJS actuator series an all stainless steel actuator providing all the same performance, but in a heavy-duty package.
Both versions offer manual and pneumatic options, are provided with laser-etched serial numbers for traceability, and carry a market-leading three year warranty. It is straightforward to add automation to the pneumatic versions by mounting switches or controllers from any manufacturer.
Work with all manufacturers linear switches and controllers (i.e. Westlock, Stonel, Burkert, etc.)
**AKS actuator series only available on 0.5" to 1.5" sizes
Size | Model number | Description |
---|---|---|
0.5 | IS05-101-1 | Radial valve 0.5" I-Sample EN 1.4435 body/EN1.4404 fittings 0.5" clamp-end outlet 3.1" from centerline Flush diaphragm & 0.5" clamp-end port 2.9" from centerline Flush diaphragm @ 120 20 micro-inch Ra surface finish electropolished and passivated includes body/actuator clamp |
0.5 | IS05-103-1 | Radial valve 0.5" I-Sample 316L 0.5" clamp-end outlet 2.92" from centerline Centerline & 0.5" clamp-end port 2.96" from centerline Centerline @ 120 20 micro-inch Ra surface finish electropolished and passivated includes body/actuator clamp and adaptor collar |
0.5 | IS05-103-2 | Radial valve 0.5" I-Sample 316L 0.5" clamp-end outlet 2.92" from centerline Centerline & 0.5" clamp-end port 2.96" from centerline Centerline @ 120 15 micro-inch Ra surface finish electropolished and passivated includes body/actuator clamp and adaptor collar |
0.5 | IS05-111-1 | Radial valve 0.5" I-Sample EN 1.4435 body/EN1.4404 25mm threaded ingold inlet fittings 0.5" clamp-end outlet 2.885" from centerline Centerline 20 micro-inch Ra surface finish electropolished and passivated includes body/actuator clamp |
0.5 | S05-111-2 | Radial valve 0.5" I-Sample EN 1.4435 body/EN1.4404 fittings 0.5" clamp-end outlet 2.885" from centerline Centerline 15 micro-inch Ra surface finish electropolished and passivated includes body/actuator clamp |
0.5 | IS05-112-1 | Radial valve 0.5" I-Sample EN 1.4435 body/EN1.4404 fittings 0.5" 105̊ weld-end outlet Flush diaphragm 20 micro-inch Ra surface finish electropolished and passivated includes body/actuator clamp |
0.5 | IS05-112-2 | Radial valve 0.5" I-Sample EN 1.4435 body/EN1.4404 fittings 0.5" 105° weld-end outlet Flush diaphragm 15 micro-inch Ra surface finish electropolished and passivated includes body/actuator clamp |
0.5 | IS05-116-1 | Radial valve 0.5" I-Sample EN 1.4435 body/EN1.4404 fitting(s), 25mm ingold threaded collar inlet, 0.5" 45̊ clamp-end outlet Centerline & 0.5" 45̊ clamp-end port Centerline at 180 ° (unground weld(s), weld is polished to match interior finish) 20 micro-inch Ra surface finish electropolished and passivated includes body/actuator clamp |
0.5 | IS05-116-2 | Radial valve 0.5" I-Sample EN 1.4435 body/EN1.4404 fitting(s), 25mm ingold threaded collar inlet, 0.5" 45̊ clamp-end outlet Centerline & 0.5" 45̊ clamp-end port Centerline at 180 ° (unground weld(s), weld is polished to match interior finish) 15 micro-inch Ra surface finish electropolished and passivated includes body/actuator clamp |
0.5 | IS05-118-1 | Radial valve , 0.5" I-Sample, EN 1.4435 body/EN1.4404 fitting(s), 0.75" clamp-end outlet, 3.1" from centerline, Flush seat, & 0.75" clamp-end port, 3.1" from centerline, Flush seat @ 120, 20 micro-inch Ra surface finish, electropolished and passivated includes body/actuator clamp |
0.5 | IS05-118-2 | Radial valve , 0.5" I-Sample, EN 1.4435 body/EN1.4404 fitting(s), 0.75" clamp-end outlet, 3.1" from centerline, Flush seat, & 0.75" clamp-end port, 3.1" from centerline, Flush seat @ 120, 15 micro-inch Ra surface finish electropolished and passivated includes body/actuator clamp |
EPDM diaphragms. Not suitable for use with solvents or petroleum agents.
Valves - diaphragms
Valve diaphragms. Medical grade silicone available in white or clear finish. Parylene surface treated version available.
Valves - diaphragms
Excellent heat and chemical resistance. Not suitable for use with ketones and esters. Steam resistant version available.
Valves - diaphragms
Pneumatic version AJS actuator series for heavy-duty applications or AKS actuator series for lighter weight needs.
Valves - actuators
Consistent sampling every time. Behind-the-seat-flow path allows for easy clean-in-place/steam-in-place between samples.
Valves - sampling
To order a product or ask a question