Single-use assemblies

Accusil tubing

Arrange a demo

Overview

Accusil tubing for accurate filling

Accurate and consistent dispensing requires having the right tubing in the right pump. Manufactured in an ISO 14644-1 Class 7 environment, Accusil is double-bagged for protection against contamination.

Developed for use with Flexicon fillers such as PF7, PD12, FP50, FPC50 and FMB210, Accusil tubing is available in lengths from 10 metres to reels up to 150 metres.

Each box of Accusil tubing comes supplied with a lot-specific certificate of conformance that is also available online.

Features and benefits

Excellent dispensing accuracy with ± 0.5 %
100 % traceability with laser-etched part-number, lot number and use-by date
Eight different sizes for filling between 0.1 ml to more than 250 ml
Full biopharmaceutical compliance with USP <87>, Ph. Eur. 6.8 Chapter 3.1.9, ISO 10993 and FDA CFR 177.2600

Technical summary

Certification and compliance	FDA 21CFR177.2600, ISO 10993, Ph. Eur. 6.8 3.1.9, USP <788>, USP <85>, USP <87>
Gamma stability	Max 50 kGy

Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.

Specifications

Technical specifications

	Accusil	Accusil Elements
Certification and compliance	FDA 21CFR177.2600, ISO 10993, Ph. Eur. 6.8 3.1.9, USP <788>, USP <85>, USP <87>
Sterilisation methods	Autoclave, EtO, Gamma, X-ray	Autoclave, EtO, Gamma, X-ray
Autoclave stability	121 °C 30 minutes	121 °C 30 minutes
Gamma stability	Max 50 kGy	Max 50 kGy
Length	10 - 152 m
Bore size	0.5 - 8 mm	1.6 - 8 mm
Bore size	0.02 - 0.315 in	0.0625 - 0.315 in
Wall thickness	1.6 - 2.2 mm	2.4 mm
Wall thickness	0.063 - 0.087 in	0.09375 in
Colour	Colourless	Colourless
Transparency	Translucent	Translucent
Spallation	Low	Low
Operating temperature range	-20 °C to 80 °C	-20 °C to 80 °C
Operating temperature range	-4 °F to 176 °F	-4 °F to 176 °F
Hardness, shore A (5sec)	58 to 64	58 to 64
Specific gravity	1.15 g/ml	1.15 g/ml
Compression set	≤30 %	≤30 %
Shelf life	5 years	5 years

See Validation guide for more tubing certification and compliance details

Materials of construction

Tubing	Platinum-cured silicone
Connector material	PVDF

Literature

Brochures

Accusil brochure (EN).pdf
PDF - 1.7mb

Datasheet

Accusil datasheet (EN).pdf
PDF - 159.9kb
Accusil Elements datasheet (EN).pdf
PDF - 124.8kb

Order Information

Product Codes

Accusil Product Codes

Dispensing volume in ml*	Bore		Wall		Coil
	mm	inch	mm	inch	10m/32.8ft	150m/492ft
< 0.5	0.5	1/50	1.6	1/16	84-103-005	84-104-005
0.5 - 1.0	0.8	1/32	1.6	1/16	84-103-008	84-104-008
1.0 - 1.7	1.2	3/64	1.6	1/16	84-103-012	84-104-012
1.7 - 7.0	1.6	1/16	1.6	1/16	84-103-016	84-104-016
7.0 - 12.0	3.2	1/8	1.8	1/14	84-103-032	84-104-032
						125m/410ft
12.0 - 22.0	4.8	3/16	2.0	0.0787	84-103-048	84-104-048
						90m/290ft
22.0 - 35.0	6.0	6/25	2.1	0.0827	84-103-060	84-104-060
						65m/213ft
> 35.0	8.0	5/16	2.2	0.0866	84-103-080	84-104-080

* (For optimum dispensing accuracy and speed. Based on dispensing of viscosity like water)

Accusil Elements Product Codes

Bore		Wall		Double segment kynar Y-element
mm	inch	mm	inch
1.6	1/16	2.4	3/32	84-510-016
3.2	1/8	2.4	3/32	84-510-032
4.8	3/16	2.4	3/32	84-510-048
6.4	1/4	2.4	3/32	84-510-064
8.0	5/16	2.4	3/32	84-510-080
9.6	3/8	2.4	3/32	84-510-096