Pumps - panel mount pumps

100 series panel mount pumps

100 series low-flow pumps

The 100 series combines performance, practicality and design. With its iconic flip-top design it is an industry standard OEM product in medical device, biotechnology and diagnostic applications, and very popular in many other applications too. The 100 series is popular for it’s accurate, repeatable and low-pulse flow rates, attractive design and compact size.

Features

High accuracy and repeatable flows for single-channel, continuous tubing applications
Flow rates up to 349 mL/min for continuous use and up to 510 mL/min for intermittent use
0.5 – 4.8 mm bore, 1.6 mm wall thickness tubing
High accuracy and repeatable flows up to medium pressures
Error-free tube change in seconds
Four-roller 114 and six-roller 116 for lower pulsation
DV version for tube life and DVP for higher pressure
Range of colour options
Other pumphead options include cover-open sensor, rotation sensor and customised occlusion

Drives

100DriveSure: 12 V to 48 V DC integrated stepper motor with Industrial Ethernet and analogue control options, sealed mounting plate and PC software (WM Connect)
100ST: compact stepper motor for precise, digital speed control
100FD: 12 V and 24 V simple DC motors at a range of speeds
100VDL: brushless DC direct drive with integrated 0-4V analogue control

Technical summary

Motor types	DriveSure brushless DC motor, Fixed speed DC motor, NEMA 17 stepper motor, Stepper motor, Variable speed brushless DC motor
Pumphead options	114DV, 114DVP
Standards	BS EN 55011-2016+A2-2021, BS EN 61010-1, BS EN IEC 61326-1-2021, CE, CSA C22.2 No. 61010-1-12/AMD1:2018, EN 61010-1:2010/A1:2019, FCC 47CFR (Part 15), IEC 61010-1:2010/AMD1:2016, RoHS, UL 61010-1:2012/R:2019-07

Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.

100 DriveSure ADC/En/Pn performance

Flow Rate (mL/min) by tube bore based on 0.1 rpm (Min) to 410 rpm (Max)
Pumphead	0.5 mm		0.8 mm		1.6 mm		2.4 mm		3.2 mm		4.0 mm		4.8 mm
Pumphead	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max
114DV	0.002	9.3	0.004	17.4	0.014	57.4	0.029	118	0.048	195	0.068	277	0.085	349
114DVP	0.002	9.3	0.004	17.4	0.014	57.4	0.029	118	0.048	195	0.068	277	0.085	349
116DV	0.002	7.1	0.003	12.0	0.011	43.4	0.022	90.8	0.032	127	0.043	158	0.048	184
116DVP	0.002	7.2	0.003	12.1	0.010	43.5	0.021	88.1	0.031	127	0.040	152	0.046	167

Performance data is based on a 48 V DC power supply, pumping water, with 0 bar inlet and discharge pressure. Actual performance is dependent on power supply voltage (DriveSure range 12 V to 48 V DC). For further information contact your local Watson-Marlow representative.

100 ST/DV pump performance

Flow rates (ml/min) Tubing 1.6 mm wall
Tube bore (mm)	(ml/rev)	Speed (rpm)
		100	400	600 (intermittent)
0.5	0.02	2.2	9.1	13.5
0.8	0.04	4.3	17	26
1.6	0.14	14	56	84
2.4	0.29	29	115	175
3.2	0.47	47.5	190	285
4.0	0.67	67	270	405
4.8	0.85	85	340	510

Motorcode (P/N)	Current A/phase	max speed low torque	max speed medium torque	max speed high torque
Z2	1.2	600*	400*	300*

*Approximate figures, tested with a simple bipolar drive at 24 V DC and at nominal current, using speed ramp

Custom Options
No visible rotation - covered holes
Logic off-switch and rotation sensor
Custom colours
Custom occlusion settings

Flow rates (ml/min) Tubing 1.6 mm wall
Tube bore (mm)	(ml/rev)	Speed (rpm)
		60	190	350*
0.5	0.02	1.4	4.3	8.0
0.8	0.04	2.6	8.2	15
1.6	0.14	8.4	26.5	49
2.4	0.29	17.5	55	100
3.2	0.47	28.5	90.5	165
4.0	0.67	40.5	128	235
4.8	0.85	51	160	300

*Low pressure applications only. Pumpsil up to 4.8 mm bore. Other tubing up to 3.2 mm bore.

Custom options
Drives	Encoder, three pulses per motor revolution
Drives	Alternative speeds available
Pumpheads	No visible rotation - covered holes
	Logic off switch and rotation sensor
	Custom colours
	Models for thin wall tubing
	Custom occlusion settings

Technical specifications

	100 DriveSure ADC/En/Pn	100 ST/DV pump	100 FD/DV pump
Motor types	NEMA 17 stepper motor	Stepper motor	Fixed speed DC motor
Pumphead options	114DV, 114DVP	114DV	114DV
Number of rollers	4	4	4
Number of channels	1	1	1
Flow rate range	0.002 ml/min to 349 ml/min	2.2 ml/min to 510 ml/min	1.4 ml/min to 300 ml/min
Operating speed range	0.1 rpm to 410 rpm	0 rpm to 600 rpm	to 350 rpm
Speed Resolution	0.1 rpm
Supply voltage	12 V to 48 V DC	24 V DC	12 V DC, 24 V DC
Operating temperature range	5 °C to 40 °C	-10 °C to 45 °C	-10 °C to 45 °C
Operating temperature range	41 °F to 104 °F	14 °F to 113 °F	14 °F to 113 °F
Rated Power	75 W
Power consumption		10W	5W
Control options	0–10 V, 2–2000 Hz, 4–20 mA, EtherNet/IP™, Fixed speed, Prime speed, PROFINET®		Fixed speed
Alarms	Cover-open, Hardware fault, Over current, Over temperature, Software fault, Speed, Stall, Under/over voltage
Outputs	Fault, Tacho
External Inputs	Prime switch
Weight	0.8 - 0.9 kg	0.45 kg	0.3 kg
Weight	1.764 - 1.984 lbs
Location	Indoor, Enclosure	Indoor, Enclosure	Indoor, Enclosure
Ingress Protection	IP66 capable panel sealing
Humidity	80 % up to 31 °C (88 °F), decreasing linearly to 50 % at 40 °C (104 °F)
Noise	<60 dB(A)		EMI noise reduction filter
Max. altitude	2000 m
Max. altitude	6561 ft
Gearbox ratio			Spur; 100:1, 30:1, 15:1
Standards	BS EN 55011-2016+A2-2021, BS EN IEC 61326-1-2021, CSA C22.2 No. 61010-1-12/AMD1:2018, EN 61010-1:2010/A1:2019, FCC 47CFR (Part 15), IEC 61010-1:2010/AMD1:2016, UL 61010-1:2012/R:2019-07
Certification and compliance	CB Certificate, EMC, NRTL certification
Compatible tubing bore size	0.5, 0.8, 1.6, 2.4, 3.2, 4, 4.8 mm	0.5, 0.8, 1.6, 2.4, 3.2, 4, 4.8 mm	0.5, 0.8, 1.6, 2.4, 3.2, 4, 4.8 mm
Compatible tubing wall thickness	1.6 mm	1.6 mm	1.6 mm
DC Resistance/Inductance		3.5 ohm/6.4 mH +/-10%
Required Driver		Bipolar, up to 1.2A
Approximate Motor Life			Up to 3000hrs

Outputs are for ADC version only. Alarms are for EtherNet/IP™ & PROFINET® versions only. For detailed specifications of individual models refer to product reference manual or contact WMFTS representative.

100 DriveSure ADC/En/Pn dimensions

A		B		C		D		E		F
mm	in	mm	in	mm	in	mm	in	mm	in	mm	in
73	2.87	74	2.91	98	3.85	128	5.04	73	2.87	89	3.50

100 ST/DV pump dimensions

100 FD/DV pump dimensions

Materials of construction

Pumphead body assembly	Grilamid PA12, Polyacrylamide—IXEF (PARA), Stainless steel
Pumphead rotor assembly	FPM rubber, Polyacrylamide—IXEF (PARA), PTFE filled PBT, Stainless steel
Pumphead roller assembly	PTFE filled PBT
Bearings	Stainless steel
Adaptor plate	IXEF PARA
Driveshaft	Stainless steel
Springs	Stainless steel
Motor	Aluminium, Plasma nitride coated stainless steel
Controller Housing	ABS/PC, Aluminium
Mounting plate assembly	Anodised aluminium, Nitrile, Polyacrylamide (PARA)-halogen free, UL94 V-0 rated, Thermoplastic elastomer (TPE)

Information listed covers the complete range. For detailed specifications of individual models/components refer to product reference manual or contact WMFTS representative.

Datasheet

100 FD DV pump datasheet (EN).pdf
PDF - 1.2mb
100 DS DV datasheet (EN).pdf
PDF - 836.7kb
100 DriveSure ADCEnPn datasheet (EN).pdf
PDF - 1.3mb
100 ST DV pump datasheet (EN).pdf
PDF - 1.2mb
100 VDL DV pump datasheet (EN).pdf
PDF - 1.2mb

Manuals

114 pumpheads manual (EN).pdf
PDF - 1.6mb
DriveSure ADC En Pn manual (EN).pdf
PDF - 4.7mb

Other Resources

100 DriveSure ADC.stp
STP - 17.8mb
100 DriveSure En.stp
STP - 17.9mb
100 panel cutout.stp
STP - 43.4kb
100 DriveSure Pn.stp
STP - 17.9mb

GSDML-V2.42-Watson Marlow-WM DrivesurePn-20230427.zip
ZIP - 3.9kb
WatsonMarlowConnectInstaller-1.16.1.zip
ZIP - 67mb
WatsonMarlowConnectInstaller-1.17.0.zip
ZIP - 67mb

drivesure-firmware-1.17.0.bundle
BUNDLE - 598.2kb
drivesure-firmware-1.16.1.bundle
BUNDLE - 596.8kb

WM-DrivesureEn-v1-6.eds
EDS - 84.4kb
WM-DrivesureEn-rev-1-5.eds
EDS - 84.7kb

Product codes

100 DriveSure ADC/En/Pn product codes

A	B	C	D	E	F
Product	Control	Cable length	Pumphead colour	Pumphead	Pressure
0 = Complete pump	4 = ADC	1 = 1 m (3.28 ft) cable	0 = No pumphead	0 = No pumphead	0 = No pumphead
6 = Drive only	8 = En (EtherNet/IP^TM)	3 = 3 m (9.84 ft) cable	1 = Standard colour	A = 114	S = Standard pressure
	9 = Pn (PROFINET^®)		2 = Black	B = 116	P = Plus pressure
			3 = White

Accessories and Spares
Product	Product code
100 Series DriveSure Sealed Mounting Plate / Sensor	019.IPMP.DVS
DriveSure cable pack - 24 V power supply/USB-C - trials only *	009.24CP.DVS
DriveSure cable pack - 48 V power supply/USB-C - trials only *	009.48CP.DVS
1 m Power Cable DriveSure ADC/En/Pn	009.1PW.DVS
3 m Power Cable DriveSure ADC/En/Pn	009.3PW.DVS
1 m Control Cable DriveSure ADC	009.1CC.DVS
3 m Control Cable DriveSure ADC	009.3CC.DVS
Ethernet Cable, RJ45 to RJ45, CAT 5e SHIELDED, 3m	059.9123.000
PROFINET^® Cable, RJ45 to RJ45, CAT 5e SHIELDED, 3m	059.9128.000

*Cable packs do not include mains power lead. If required, order power leads suitable for your region.

100 ST/DV pump product codes

Pump product codes
Description	Supply	Speed (rpm)	with 114DV	with 114DVP
114ST stepper motor drive	24 VDC	0 - 600	010.5Z2S.00A	010.5Z2S.P0A

Tubing product codes for 114DV and 114DVP pumpheads
Bore/wall	Pumpsil	Marprene	Bioprene	STA-PURE PFL	PVC*	STA-PURE PCS
0.5/1.6 mm	913.A005.016	902.0005.016	933.0005.016
0.8/1.6 mm	913.A008.016	902.0008.016	933.0008.016
1.6/1.6 mm	913.A016.016	902.0016.016	933.0016.016	966.0016.016	E3603.016.16	961.0016.016
2.4/1.6 mm	913.A024.016	902.0024.016	933.0024.016
3.2/1.6 mm	913.A032.016	902.0032.016	933.0032.016	966.0032.016	E3603.032.16	961.0032.016
4.0/1.6 mm			933.0040.016		E3603.040.16
4.8/1.6 mm	913.A048.016	902.0048.016	933.0048.016	966.0048.016	E3603.048.16	961.0048.016

*recommended for 114DVP +pressure pumphead only

100 FD/DV pump product codes

Pump product codes
Description	Supply	Speed (rpm)	with 114DV	with 114DVP
114FD DC motor drive	12 VDC	60	010.5AM0.00A	010.5AM0.P0A
	24 VDC	60	010.5BM0.00A	010.5BM0.P0A
	12 VDC	190	010.5AS0.00A	010.5AS0.P0A
	24 VDC	190	010.5BS0.00A	010.5BS0.P0A
	12 VDC	350	010.5AU0.00A#	010.5AU0.P0A#
	24 VDC	350	010.5BU0.00A#	010.5BU0.P0A#

# Low pressure applications only. Pumpsil up to 4.8 mm bore. Other tubing up to 3.2 mm bore

Tubing product codes for 114DV and 114DVP pumpheads
Bore/wall	Pumpsil	Marprene	Bioprene	STA-PURE PFL	PVC*	STA-PURE PCS
0.5/1.6 mm	913.A005.016	902.0005.016	933.0005.016
0.8/1.6 mm	913.A008.016	902.0008.016	933.0008.016
1.6/1.6 mm	913.A016.016	902.0016.016	933.0016.016	966.0016.016	E3603.016.16	961.0016.016
2.4/1.6 mm	913.A024.016	902.0024.016	933.0024.016
3.2/1.6 mm	913.A032.016	902.0032.016	933.0032.016	966.0032.016	E3603.032.16	961.0032.016
4.0/1.6 mm			933.0040.016		E3603.040.16
4.8/1.6 mm	913.A048.016	902.0048.016	933.0048.016	966.0048.016	E3603.048.16	961.0048.016