| 101U/R, 101S/R, 101F/R - 120 pumps |
120 range of laboratory pumps
- Keypad control with speed display and intuitive interface
- Brushless DC motor
- Choice of pumpheads
|
| 202 - 202AA 202BA - 205S, 205U – 200 series cased pump |
500 series pumpheads
- 505CA multi-channel pumphead offers high-precision pulsation-free pumping
- Improved speed control
|
| 313F/D, 313S/D, 313U/D, 313T/D – 323 pumps |
300 series of science and laboratory pumps
- Enhanced control features
- Keypad control with speed display
- Increased power and speed control page
- Brushless DC motor
|
| 401 - 401U/D1, 401U/DM2, 401U/DM3 |
100 series of laboratory pumps
- Keypad control with speed display and intuitive interface
- Increased power and speed control range
- Brushless DC motor
- 3 year warranty
|
| 504S/RL, 504S/RL2, 504S/L, 504U/RL, 504S/RL2, 504U/L, 504U/D, 504Du/RL, 504Du/RL2,504Du/L, 504S/D, 504Du/D. - 530 process pumps range |
530 NEMA 4X (IP66) washdown pumps
- Ingress protection upgraded from IP55 to IP66, NEMA 4X
- Speed control range 2200:1
- 59% more flow with new 520R2, 2.4mm wall pumphead fitted. Use 520R for 1.6mm wall tube
|
| 505S, 505S/RL 505S/L 505S/D, 505U/RL, 505U/L 505U/D, 505Du/RL, 505Du/L, 505Du/D, 520S/RL 520S/L 520S/D, 5020/RL, 520U/L 520U/D, 520Du/RL, 520Du/L, 520Du/D - 530 process pumps range |
530 process pumps range
- 59% more flow with new 520R2, 2.4mm wall pumphead fitted. Use 520R for 1.6mm wall tube
- Speed control range 2200:1
- Higher torque from brushless DC motor
- Still able to fit a number of different pumpheads
|
| 505Dz - 505Dz/RL |
Flexicon dispensing pumps
- Improved programming
- Speed control range 2200:1
- Available for use with 501RL and 313/314 pumpheads
|
| 503 - 503P/RL, 503P/RL2, 503P/L, 503P/D |
521 range of close coupled pumps
- Industrial air motor, runs quieter
- Lower cost
|
| 501 Close-coupled - 501F/RL, 501l/RL |
521 range of close coupled pumps
- The 520R2C pumphead (2.4mm wall) offers higher flows with better flow stability over the 520RC (1.6mm wall)
- Variable speed 5:1 high torque motor
|
| 623S/R, 623U/R, 623Du – 630 process pumps |
630 range of NEMA 4X (IP66) process pumps
- Ingress protection upgraded from IP55 to IP66, NEMA 4X
- Speed control ratio 2650:1 (0.1 to 265rpm speed range)
- Keypad incorporates 3 level security PIN lock
- Industrial logic control from 5V up to 24V
|
| 624, 624Di/R, 624Di/RE, 624Di/L |
630 range of industrial process pumps
- Improved ingress protection from IP55 to IP66, NEMA 4X
- Speed control ratio 2650:1 (0.1rpm speed range)
- Dispenses 500ml in 3.5 seconds with ±0.5% accuracy
|
| 603P - 603P/R, 603P/L |
621 range of close coupled pumps
- Upgraded to accept the new 620R pumphead with either continuous tube or with 620RE LoadSure elements
- Flow rates to 18 litre/min
|
| 601 baseplate - 601FB/R, 601VB/R, 601DFB/R, 601DVB/R |
621 range of close coupled pumps
- Upgraded to accept the new 620R pumphead for continuous tube or with 620RE with LoadSure elements
- Fixed speed or Varmeca integral inverters for flows to 19 litre/min
|
| 601 Close-coupled, 601F/R, 601DF/R, 601I/R, 601TI/R, 601 DV/R |
621 range of close coupled pumps
- Upgraded to accept the new 620R pumphead for continuous tube or with 620RE with LoadSure elements
- Fixed speed or Varmeca integral inverters for flows to 19 litre/min
|
| 700, 701S/R, 701S/RE, 701U/R, 701U/RE, 704S/R 704S/RE, 704U/R, 704U/RE |
730 high flow process pumps
- Smaller footprint, 5kg lighter, 30% less power consumption
- Better control - precision 3600:1 speed turndown
- Improved protection - IP66 (NEMA 4X) washdown drives
- Five year warranty
- Full process functionality; RS485 control, industrial 24V logic, volt free outputs, annalogue
|
| Bredel SP |
Bredel series
- 20% lighter with a 35% smaller foot print using 20% less components
- Flows to 108,000 litres/hr
- Suction lift to 30ft
- Dry running and reversible
|
| 501 - 501RL2 |
530 range of mid flow process pumps
- 520R2 pumphead is designed to take up to 9.6mm bore x 2.4 wall tube 520R uses 1.6 wall tube
- Flow rates to 3.5 litre/min from 520R2 and 2.4 litre/min from 520R
- Larger track radius enables more flow at same speed as 501RL
|
| 601R – 620R, 620RE, 620RE4 |
600 series mid flow process pumps
- The 620R pumphead has a tool-unlockable front guard
- Accepts all the same size continuous tubes as the 601R.
- Easier tube loading and more positive tube retaining
|
| MasoSine EcoSine |
Certa process pumps
- Cleaner than lobe or circumferential piston pump
- Energy efficient, extremely low downtime
- Flow rates to 99,000 litre/hr, pressures to 15 bar
- EHEDG (Type EL Class I and EL Aseptic Class I) and 3A
|
Neoprene tubing
|
Please ask your local sales representative to recommend a tube for you application.
|
| Puresu |
WMArchitect Customised Designs
|
| Asepticsu |
WMArchitect Fill/Finish
|
