• Support

Replacement products for discontinued product ranges

Find out our current recommended product ranges and the discontinued product ranges these have replaced.

Range replacement

Discontinued model Recommended model
101U/R, 101S/R, 101F/R - 120 pumps

120 range of laboratory pumps

  • Keypad control with speed display and intuitive interface
  • Brushless DC motor
  • Choice of pumpheads
202 - 202AA 202BA - 205S, 205U  – 200 series cased pump

500 series pumpheads

  • 505CA multi-channel pumphead offers high-precision pulsation-free pumping
  • Improved speed control
313F/D, 313S/D, 313U/D, 313T/D – 323 pumps

300 series of science and laboratory pumps

  • Enhanced control features
  • Keypad control with speed display
  • Increased power and speed control page
  • Brushless DC motor
401 - 401U/D1, 401U/DM2, 401U/DM3

100 series of laboratory pumps

  • Keypad control with speed display and intuitive interface
  • Increased power and speed control range
  • Brushless DC motor
  • 3 year warranty
504S/RL, 504S/RL2, 504S/L, 504U/RL, 504S/RL2, 504U/L, 504U/D, 504Du/RL, 504Du/RL2,504Du/L, 504S/D, 504Du/D. - 530 process pumps range

530 NEMA 4X (IP66) washdown pumps

  • Ingress protection upgraded from IP55 to IP66, NEMA 4X
  • Speed control range 2200:1
  • 59% more flow with new 520R2, 2.4mm wall pumphead fitted. Use 520R for 1.6mm wall tube
505S, 505S/RL 505S/L 505S/D, 505U/RL, 505U/L 505U/D, 505Du/RL, 505Du/L, 505Du/D, 520S/RL 520S/L 520S/D, 5020/RL, 520U/L 520U/D, 520Du/RL, 520Du/L, 520Du/D - 530 process pumps range

530 process pumps range

  • 59% more flow with new 520R2, 2.4mm wall pumphead fitted. Use 520R for 1.6mm wall tube
  • Speed control range 2200:1
  • Higher torque from brushless DC motor
  • Still able to fit a number of different pumpheads
505Dz - 505Dz/RL 

Flexicon dispensing pumps

  • Improved programming
  • Speed control range 2200:1
  • Available for use with 501RL and 313/314 pumpheads 
503 - 503P/RL, 503P/RL2, 503P/L, 503P/D

521 range of close coupled pumps

  • Industrial air motor, runs quieter
  • Lower cost 
501 Close-coupled - 501F/RL, 501l/RL 

521 range of close coupled pumps

  • The 520R2C pumphead (2.4mm wall) offers higher flows with better flow stability over the 520RC (1.6mm wall)
  • Variable speed 5:1 high torque motor 
623S/R, 623U/R, 623Du – 630 process pumps

630 range of NEMA 4X (IP66) process pumps

  • Ingress protection upgraded from IP55 to IP66, NEMA 4X
  • Speed control ratio 2650:1 (0.1 to 265rpm speed range)
  • Keypad incorporates 3 level security PIN lock
  • Industrial logic control from 5V up to 24V 
624, 624Di/R, 624Di/RE, 624Di/L

630 range of industrial process pumps

  • Improved ingress protection from IP55 to IP66, NEMA 4X
  • Speed control ratio 2650:1 (0.1rpm speed range)
  • Dispenses 500ml in 3.5 seconds with ±0.5% accuracy 
603P - 603P/R, 603P/L 

621 range of close coupled pumps

  • Upgraded to accept the new 620R pumphead with either continuous tube or with 620RE LoadSure elements
  • Flow rates to 18 litre/min 
601 baseplate - 601FB/R, 601VB/R, 601DFB/R, 601DVB/R 

621 range of close coupled pumps

  • Upgraded to accept the new 620R pumphead for continuous tube or with 620RE with LoadSure elements
  • Fixed speed or Varmeca integral inverters for flows to 19 litre/min 
601 Close-coupled, 601F/R, 601DF/R, 601I/R, 601TI/R, 601 DV/R

621 range of close coupled pumps

  • Upgraded to accept the new 620R pumphead for continuous tube or with 620RE with LoadSure elements
  • Fixed speed or Varmeca integral inverters for flows to 19 litre/min 
700, 701S/R, 701S/RE, 701U/R, 701U/RE, 704S/R 704S/RE, 704U/R, 704U/RE 

730 high flow process pumps

  • Smaller footprint, 5kg lighter, 30% less power consumption
  • Better control - precision 3600:1 speed turndown
  • Improved protection - IP66 (NEMA 4X) washdown drives
  • Five year warranty
  • Full process functionality; RS485 control, industrial 24V logic, volt free outputs, annalogue 
Bredel SP 

Bredel series

  • 20% lighter with a 35% smaller foot print using 20% less components
  • Flows to 108,000 litres/hr
  • Suction lift to 30ft
  • Dry running and reversible 
501 - 501RL2

530 range of mid flow process pumps

  • 520R2 pumphead is designed to take up to 9.6mm bore x 2.4 wall tube 520R uses 1.6 wall tube
  • Flow rates to 3.5 litre/min from 520R2 and 2.4 litre/min from 520R
  • Larger track radius enables more flow at same speed as 501RL 
601R – 620R, 620RE, 620RE4 

600 series mid flow process pumps

  • The 620R pumphead has a tool-unlockable front guard
  • Accepts all the same size continuous tubes as the 601R.
  • Easier tube loading and more positive tube retaining 
MasoSine EcoSine

Certa process pumps

  • Cleaner than lobe or circumferential piston pump
  • Energy efficient, extremely low downtime
  • Flow rates to 99,000 litre/hr, pressures to 15 bar
  • EHEDG (Type EL Class I and EL Aseptic Class I) and 3A 
Neoprene tubing

Please ask your local sales representative to recommend a tube for you application.

Puresu

WMArchitect Customised Designs

Asepticsu

WMArchitect Fill/Finish

Sign up to our newsletter and stay up to date with our latest news

Sign up now